Does the library know that you have a bulk i/o? Maybe you have to check the settings....
----- Original Message ----- From: "Meadows, Andrew" <[EMAIL PROTECTED]> To: <ADSM-L@VM.MARIST.EDU> Sent: Thursday, September 15, 2005 1:50 PM Subject: Re: [ADSM-L] 3583 library > That's just the problem. If I put tapes in the io door and do a search=bulk labelsource=barcode and reply to the request nothing happens. No error message nothing. If I manually pull them into empty slots in the library and do a search=yes then I can label the tapes fine..... > > - > > > Only use search=yes if the tapes are allready in the library.... > search=bulk searches the bulk-i/o.... > > Regards, > Maurice > > ----- Original Message ----- > From: "Scott, Mark William" <[EMAIL PROTECTED]> > To: <ADSM-L@VM.MARIST.EDU> > Sent: Thursday, September 15, 2005 6:19 AM > Subject: Re: [ADSM-L] 3583 library > > > Hi Andrew > We have just upgraded our 3583 to a 3584 and the following is > the syntax we would run for checking in new tapes to be labelled > > > LABEL LIBVOLUME 3583LIB CHECKIN=SCRATCH SEARCH=BULK LABELSOURCE=BARCODE > > Then obviously or maybe not q req and then reply to that number. > > Hope this helps > > Regards Mark > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of > Meadows, Andrew > Sent: Thursday, 15 September 2005 12:08 PM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: 3583 library > > As a side note all firmware has been upgraded regularly in the past 2 > years. No help from firmware change.. > > -----Original Message----- > From: Meadows, Andrew <[EMAIL PROTECTED]> > To: 'ADSM-L@VM.MARIST.EDU' <ADSM-L@VM.MARIST.EDU> > Sent: Wed Sep 14 21:31:21 2005 > Subject: 3583 library > > Config > Tsm server version 5.3 > Windows 2003 server > 3583 IBM library using tsm driver connected via SCSI > > Does anyone have a similar config? And if so do you have issues with > label scratch search=bulk. I am currently having to connect to the > library web page and import the tapes, and do a label scratch > search=yes. I have deleted and readded the library multiple times trying > to get this to work. When it was installed initially I was told this is > the way that tsm works with this library type...... Just wondering if > anyone else has the same trouble and if I could get some help > troubleshooting. > Thanks in advance. > > ******************************************** > This message is intended only for the use of the Addressee and > may contain information that is PRIVILEGED and CONFIDENTIAL. > > If you are not the intended recipient, you are hereby notified > that any dissemination of this communication is strictly prohibited. > > If you have received this communication in error, please erase > all copies of the message and its attachments and notify us > immediately. > > Thank you. > ******************************************** >
