Hi Charles,
yes you can. There is no SAP R4 - you are actually using SAP R/3 Version
4.5B.
You should check if your TDP for SAP R/3 Version supports SAP R/3 4.5B.
If yes everthing should work fine.
Kind regards and greetings from Austria
Thomas Rupp
UIS - Informatik Services
Vorarlberger Illwer
Hello,
No other way to solve this that installing 4.1.x version.
IC27123 BACKUPSETS DON'T EXPIRE PROPERLY
SYSROUTES:
IC27123(AIX37),PQ40150(MVS37),IC27481(NT37),IC27482(HP37),IC27483(SUN37)
,
IC27484(AIX41),PQ40151(MVS41),IC27485(NT41),IC27486(HP41),IC27487(SUN41)
Backupsets with finite
Hello,
Does somebody own an electronic copy of the TDP SQL1.1 Redbook ? I only
found the new one (TDP SQL 2.2 for SQL7.0) one ?
In fact my problem is the following : I made a full disaster recovery
test of an SQL server BUT ...
- I restored the full system, including the SQL Server code : OK
-
Hi Tuan,
It happened under both circumstances. But, we found out what the problem
was. In fact, there was a problem with an NTFS drive where we wanted to
restore ! It should work fine now.
Thank you for your help.
> -Original Message-
> From: LY, Tuan (Kanata) [SMTP:[EMAIL PROTECTED]]
>
Hi All,
I have a 3494 that normally runs almost unattended. Yesterday I had to attend to it
because of a tape stuck in the drive, but also discovered 8 carts in the IO port.
These were all valid, in use ADSM tapes and the library was showing their status as
manually removed.
Any ideas how th
Hi,
Does anyone knows that TSM Client can run on OS/390.
Thanks!
Paul Lo
Direct Line: 886-2-27259874
E-Mail [EMAIL PROTECTED]
Address: No. 206, Sec. 1, Keelung Road, Taipei, Taiwan
I've also had this happen with earlier versions of
code and had to wind up rebooting the machine. The
answer from support was that the process was hung in
memory and the only fix was to reboot. It did solve
it as well.
Thanks,
Angela
--- Jeff Bach <[EMAIL PROTECTED]> wrote:
> Try kill -11 4853
>
copy your dsmserv.opt, dsm.sys, dsm.opt, inclexcl and
device config file if they aren't defined in the
dsmserv.opt file.
Exporting the server will get all of the parameters
you listed and will not need to be recreated.
Thanks,
Angela
--- Jeff Bach <[EMAIL PROTECTED]> wrote:
> Create a file device
Folks...
I have an instance where I want to backup an entire Sybase database to its own disk
buffer. However, for DRP purposes I need the entire database, so if the buffer
reaches it high threshold, I want the backup to fail. I'll then increase the size of
the disk buffer, and restart the ba
Hi,
My customer's SAP version is SAP Kernel Release 4.5B. DB is Oracle
8.0.5.Ther are on RS6000 SP ( AIX 4.3.2) .
Can our TDP for SAP support SAP R4 ? ( I know our product about SAP
backup is TDP for R3, does it support R4? ) If not when and which version
can ?
Wish your reply .
Thank you
Hi. I've done this about 20 times in the last week, except I'm using
alt_disk_installs and mksysb's to disk.
Define a file devclass, then backup db type=full devc=fileclass
vol=/mydir/filename. Then, on your test box, mount mydir and copy your
devconfig (or simply ftp it if you have disk space)
Running 3.7.4 on solaris.
I had three backupsets.
One was deleted before it expired, the other two were allowed to expire.
Now I have three tapes that I can't use.
This was posted back in Feb...
> -Original Message-
> From: France, Don G (Pace)
> Subject: Re: I cant delete a backupset .
We are going to migrate from ADSM 3.1.2.20 to TSM 4.1, however, before we do
it on the production server we want to try it on a test server. We have a
test server running ADSM 3.1.2.90. We want to "copy" the current database
from production to test, tape drives are not connected to the test syst
Anyone have a nifty way to find out exactly which volume, specific backed up
files are located on.
I would like to build a restore script that will restore files in multiple
streams without one session waiting for a tape that is in use by one of my
other restore sessions.
ThanX
> Jim Taylor
> S
How quickly does dsmreconcile run and do you already have files in migrated
storage?
> -Original Message-
> From: Matthew A. Bacchi [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, June 13, 2001 1:16 PM
> To: [EMAIL PROTECTED]
> Subject: ADSM/HSM migration candidates list
>
> Folks,
> I
I think I was unclear in my original post.
We have already done step 3. The TSM 4.1 software is already
installed on a server in which the 3.1.2.50 software is *also*
running. We would like to upgrade the 3.1.2.50 instance to 4.1,
and I'm wondering if/how I should do this without re-installing
th
hi Ming Lau,
I have never used cron to schedule a TDPO backup. But if you look at the
user manual where it talks about scheduling backups using TSM scheduler,
you will see some example scripts. You can basically invoke these scripts
through cron.
regards,
Thiha
Date:Tue, 12 Jun 2001 17:3
hi Wang lei,
AIX 4.1.5 is not a support level of AIX and so is Oracle7. AIX 4.3.2 and
O8.0.5 is supported. The latest TDPO available is 2.2.
regards,
Thiha
Date:Wed, 13 Jun 2001 11:52:13 +0800
From:Lei L Wang <[EMAIL PROTECTED]>
Subject: TSM/TDP on AIX4.1.5
Hi all,
my customer has
Has anyone encountered this problem? I assume that TSM also uses the same
native Win2K API?
If not, then maybe this should be a heads up?
http://www.wininformant.com/Articles/Index.cfm?ArticleID=21351
The AD Backup Bug: Monster in the Closet?
As we all know, making reliable backups is one of
The default management class for directories is the one with the longest
retention period. But what is that? Retextra? or Retonly?
I've been hit by this as well.
cd to /dbaa1vp0 and *then* do the dsmfmt. It's not intuitively obvious, but
dsmfmt writes to a *file* and not to a *path*.
Tom Kauffman
NIBCO Inc.
> -Original Message-
> From: Martin, Jon R. [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, June 14, 2001 2:22 P
When I did the upgrade all the files were moved fine for the server code,
however I needed to EDIT the ie, dsm.opt, and dsm.sys for the client_only
upgrades.
This is because the files were copied, but they still pointed to the OLD
code libraries, not the new ones.
Brad Tidd <[EMAIL PROTECTED]>
This is it exactly. I should have searched the archive before posting.
Thanks for the reply
-Original Message-
From: Richard Sims [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 14, 2001 3:46 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM db and log volumes / ESS
>Error writing file
Just the normal incrementals is fine. TSM does the magic behind the scenes
to determine what files were on the system on the date specified!
-
Tom Walker
> -Original Message-
> From: Dearman, Richard [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, June 13, 2001 3:16 PM
> To: [EMAIL PROTEC
Try kill -11 4853
Jeff Bach
Home Office Open Systems Engineering
Wal-Mart Stores, Inc.
WAL-MART CONFIDENTIAL
-Original Message-
From: Long Nguyen [SMTP:[EMAIL PROTECTED]]
Sent: Thursday, June 14, 2001 2:44 PM
To: [EMAIL PROTECTED]
Subject:
TSM moved the required files. The new $DSM_DIR is different. However, I seem to recall
that one file didn't get moved automattically, I forget now which one.
Miles
---
Miles Purdy
System Manager
Farm Incom
WHY DONT U USE WEB ADMIN FROM UR NETSCAPE
SERVERNAME:1580
-Original Message-
From: Martin, Jon R. [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 14, 2001 2:22 PM
To: [EMAIL PROTECTED]
Subject: TSM db and log volumes / ESS
I am trying to create an additional db and log volume to impleme
If you're starting dsmserv from /etc/inittab check to see if you have it
set to respawn. If it is, change the inittab entry, refresh inittab by
issuing the "telinit q" command and then try killing it.
At 03:44 PM 6/14/01 -0400, you wrote:
>I did that, look below:
>
>root@cdesrv1:/var/adm
>--> ps
>When trying to kill the ./dsmserv, I can't kill it. I still see it running
>with a ps command.
Long - The server should halt if sent a SIGTERM (the default of the 'kill'
command). You could try 'kill -9' on it. But make sure it's not
an avoidable thing...
First, check the obvious: ins
I did that, look below:
root@cdesrv1:/var/adm
--> ps -ef | grep dsm
root 16230 25472 0 15:39:05 pts/21 0:00 grep dsm
root 4853 1 0 Jun 08 ? 7923:22 ./dsmserv
root@cdesrv1:/var/adm
--> kill -9 4853
root@cdesrv1:/var/adm
--> ps -ef | grep dsm
root 4853 1 0 Jun 0
So the TSM installation moved all files to their new directories or did it
keep the old ADSM file structure?
-Original Message-
From: Miles Purdy [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 14, 2001 2:38 PM
To: [EMAIL PROTECTED]
Subject: Re: Upgrading to 4.1
We just did the exact sa
>Error writing file /dbaa1vp0/db, errno = 27
Jon - From http://people.bu.edu/rbs/ADSM.QuickFacts :
dsmfmt errno 27 (EFBIG - File too It may be that your Unix "filesize"
large) limit prohibits writing a file that
try with command : kill -9 PID
Long Nguyen
cc: (bcc: MUSTAFA BAYTAR/ATIM/ICECEK)
Sent by: Subject: Can't kill ./dsmserv
"ADSM: Dist
Stor Manager"
I am trying to create an additional db and log volume to implement TSM
mirroring. If I use a logical volume created on an internal scsi or ssa
attached drive I have no problem. However the goal is to create the logical
volumes on a ESS vpath. When I try to dsmfmt these volumes I run into the
fo
When trying to kill the ./dsmserv, I can't kill it. I still see it running
with a ps command.
Any ideas??
_
Get your FREE download of MSN Explorer at http://explorer.msn.com
>Can anyone tell me the latest version of *sm that was developed for OS/2?
Jim - See http://www.tivoli.com/support/storage_mgr/clients.html
We just did the exact same upgrade, but it is even easier than what you outlined below.
1. do your backups
2. shut down the server
3. use smit to install the new version
This is all we did and everything worked great!
miles
---
Must buy. TDS is a generic reporter; the various TDSfthisandthat packages
target TDS to a specific application.
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
> Marc Levitan
> Sent: Thursday, June 14, 2001 1:37 PM
> To: [EMAIL PROTECTED]
> Subj
Can anyone tell me the latest version of *sm that was developed for OS/2?
Create a file device class on both server, export the server (export server)
to a file, move the file to the new system and import the server.
Use filed=none. This will copy a lot of the config.
Jeff Bach
Home Office Open Systems Engineering
Wal-Mart Stores, Inc.
WAL-MART CONFIDENTIAL
We are currently running backups using ADSM v3.1 on AIX 4.3.1. We are
moving the service to TSM v4.1 on Sun Solaris 8.
Does anybody have any suggestions for moving the database? Will RESTORE
DB work in any fashion, or am I stuck using DUMPDB and LOADDB?
I performed a test run of the dumping an
Hi Thomas,
If you find any information you deem helpful could you please send it
my way? We're doing the same thing and are looking for any assistance we
may find.
Luke Dahl
818-354-7117
"Thomas A. La Porte" wrote:
> Platform: AIX 4.3.2
> ADSM: 3.1.2.50
>
> We have been testing 4.1 on a sy
Can you elaborate as to what the difference is...
Are you able to do anything with the free TDSfSMA? or MUST you buy the
TDS?
Thanks!
Marc
Lindsay Morris
cc:
Sent by: "ADSM:Subject: Re: Tivoli Decision Support
Platform: AIX 4.3.2
ADSM: 3.1.2.50
We have been testing 4.1 on a system that already has a 3.1
instance installed. We are now satisified with 4.1, and would
like to migrate our 3.1.2.50 instance to 4.1. The manual
indicates directions on how to do the migration at the time of
installing the 4.1 s
Gang,
During a major cleanup operation in my office, I stumbled across two FDDI
adapters for RS/6000. The model number on them is SK-NET FDDI-LP. They are
DAS cards and the machine types they went into are: 7024, 7025, 7026, 7043,
7248, 7317. The docs are here but as you can imagine the firmwa
Try putting the tapes in the slots in the library rather than in the bulk
port. Change your command to search=y and see if that works. Maybe only
put some of the tapes in and leave the rest for future bulk testing. I've
seen this before but in my brain addled state I can't remember what the
pro
I need to move TSM server to a different AIX machine. Other than
dsmserv.opt, dsmserv.dsk and nodelock files what other files I will need to
transfer to new machine.
We use raid set for database and log files and tape library for storage.
Will I need to redefine domain, mgmtclass, copygroup, stgp
> Matt - Perhaps you can try this:
>
> dsmmigrate -R /b32tmd/tmd3
>
> Capture its messages (they go by quickly).
> Let's see how it reacts to that. It may give us some sense
> of what's going on.
> (I assume you did inspection with 'dsmls' and saw that all files
> were in Resident state?)
>
>
Try the command line: help update schedule.
GUI sometimes has problems.
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
> Patrick Sheehan
> Sent: Thursday, June 14, 2001 12:05 PM
> To: [EMAIL PROTECTED]
> Subject:
>
>
> Hello TSMer's
>
> I'm try
I was getting the exact same sense data errors
from my 3583. I ended up doing two things. There
was a piece of clear plastic tape on the fudical
label of the I/O station that I removed. This
seemed to clear up errors on the display of the
3583. Next, I had the picker assembly replaced.
Things
Hello TSMer's
I'm trying to get a schedule for weekday incremental and weekend full's to
take. Whenever I try to define WEEKDAY as when the Incremental should kick
off I get an error when I try to FINISH (yes I'm using the GUI, is that my
problem?) I get an "Invalid day of the week-WEE" error . A
Here's my q drive output:
Library Name Drive Name Device Type Device ON
LINE
---
---
3575LIB RMT0 3570/dev/rmt0
Yes
3575LIB RMT1 3570
TDSfSMA is bundled with TSM 4.1 for free -- but ---
it requires Tivoli Decision Support, which retails at $21,000 or so.
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
> Pitur Ey~srsson
> Sent: Thursday, June 14, 2001 11:43 AM
> To: [EMAIL PROT
Hello, all!
I have just SCSI attached an IBM 3583 LTO library to my TSM server.
Installed the latest verstion of Atape and AIX recognizes the library as
follows:
rmt6 Available 10-68-00-0,0 IBM 3580 Ultrium Tape Drive
rmt7 Available 10-68-00-1,0 IBM 3580 Ultrium Tape Drive
rmt8 Available 10-68-0
Haven't worked with this library but:
Do a q drive and make sure drives are there and online.
Did you do an audit library after setting up the new library?
David Longo
>>> [EMAIL PROTECTED] 06/14/01 11:45AM >>>
Hello, all!
I have just SCSI attached an IBM 3583 LTO library to my TSM server.
Ins
I've seen this happen while deleting filespaces. Usually when I try to
delete too many at once or when clients are accessing the server while I'm
doing the deletes. If this is the type of operation you are performing when
the deadlock occurs, try the operation again with fewer simultaneous delet
I have TSM 3.1 Server installed on a 600-2135 AS/400 under V4R5M0.
Although the Server will start I am unable to start either the
The AS/400 based admin client (fails with MCH3601 error) and the HTTP Admin
Client which 'half' works but says it cannot
find the necessary page. (log in appears norm
>Do you know if there are some web sites where it's possible to try =
> tests for TSM certification ?
Yep, try this Tivoli site:
http://www.tivoli.com/services/certification/exams/699exam.html
You'll see the Sample Exam in PDF format.
-Matt
/**
**Matt Bacchi [EMAIL PRO
Is this the only page with samle test.
Kveðja/Regards
Pétur Eyþórsson
Tæknimaður/Technician
Kerfisfræðingur IR
Microsoft Certified System Engineer
Nýherji HfSími TEL: +354-569-7700
Borgartún 37 105 Iceland
URL:http://www.nyherji.is
- Original Message
Hi
only one short question
Does TDSfSMA (Tivoli Decision Support for Storage Management Analysis) cost anything?
does it come with the TSM Server or does it come with software like Tivoli Disaster
Recovery.
Kvedja/Regards
Petur Eythorsson
Taeknimaður/Technician
Kerfisfræðingur IR
Microsoft
Hi,
You have a deadlock between a node and (one of) that node's filespace(s).
Without knowing the platform of level of your server, it's nearly
impossible to tell what's causing the deadlock.
Give a call to the support team and I'm certain they'll identify the source
of the deadlock and more im
Vint,
This could be APAR IC29998 which identifies a problem that
a GPF occurs when the domdsm.log file has some characters
that it did not expect to see.
This problem has been fixed and will be a part of the
next Domino PTF, 1.1.2, which is currently *targeted*
for FTP availability at the end of
Sounds like it could be that you're spawning more than
1 archive session each time you're performing an
archive via maxsession parameter on the client. Also
depending upon what stgpool you're using for archives
do you have more that 1 resource for that stgpool (ie
does that stgpool contain only 1
Hi,
Do you know if there are some web sites where it's possible to try tests for TSM
certification ?
Thanks in advance
Gianni Garda
Junior TSM Admin
And don't forget - on the *ix systems, the include/exclude list is kept in
a separate file, normally "inclexcl.txt", so adding the lines to dsm.sys
won't work.
Nick Cassimatis
[EMAIL PROTECTED]
>We want to do a TSM restore from system A's backups to system b.
Rick - See the Backup-Archive Clients manual,
"Restore: Advanced Considerations",
"Restore or Retrieve Files to Another Workstation"
What are the relevant details: platform, oslevel, server level??
At 11:19 AM 6/14/2001 +0200, you wrote:
>hello all,
>
>I have encountered a database deadlock and I was wondering if anyone can
>explain to me how to read the following output. Is it possible to find out
>what causes the deadlock?
I'm sure TSM can do this, but initial hunting didin't turn up
anything. It's probably right before our eyes . . .
We have systems A and B that we backup to TSM. THey are the same
architecture (AIX). We want to do a TSM restore from system A's
backups to system b.
How do you setup TSM so syste
Jager,
This message usually means that TDP for Exchange
is trying to open a file (for write) through an
admin share on the local drive containing the
Exchange database or log files.
I have seen this error sometimes when the internal admin
shares for the drives that contain the database or
log fi
L&g
reading the installation requirements, the following software must be
installed on both the production system and the backup system:
* TSM Backup/Archive Client
* TDP for R/3 or Oracle
* TSM API
* TSM Server
what if the backup system is (also) the TSM Server !
This error only occurs when the Windows function CreateFile() fails.
TDP is trying to open the file to be restored for GENERIC_WRITE and
FILE_FLAG_SEQUENTIAL_SCAN. You will have to run a trace in order
to determine the name of the file being opened. Once you have the name,
you can investigate the
>Matthew - Is the file system occupied by small files, under 4KB in size?
No, it isn't. In fact it is occupied by a few quite large files, between
100-500 Meg. There are some lock files in the filesystem, which are around
4KB, but the majority of the files are larger.
Richard, maybe you or
Shalom everybody
TSM 3.7.4
Using TSM Administration
Programming with API
AIT1/AIT2 tapes.
I need know
- how much MB are really stored in a tape
- how many % of reclamable space there is really
- How much % of the tape can be used more (capacity of
tape according to the same average compress rati
Hi,
No there is no accompanying message
The thing is is the object does not exist on the client, so there should not be
a question of sending the object.
Or are you saying that if at some stage TSM has backed up directory/files, that
if it does not have rights to those directory/files because th
Please HELP,
We are desperately trying to restore a 192GB Exchange database (public &
private). But it stops with the following message :
ACN4215E : Failed to open file during restore
We tried to use different backups but it did not work either.
Thank you for your help !
-
Thanks Dave,
After endless discussions with various people we understand that PPRC will
propogate partially written pages to both mirrors. Therefore like you, we
have decided to recommend TSM mirroring to the customer.
Richard Bates
Storage Specialist
ITS - SB - Enterprise Consultancy Services
Try querying your activity log as far back as you can go for any references
to that volume. Its probably being detected as some sort of media fault by
TSM.
q actlog begind=-X search=volumeY
Jack
-Original Message-
From: Mueller, Philip J. [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, Jun
Hello, can everyone help :
I start an archive schedule on a client. After the end of archiving the client
has two sessions : the first is Run and a second with status IdleW and I must
cancel this sessions over the adminconsole. The archiving process is finished
succesful without failurs.
>I can't seem to get HSM to generate a candidates list and begin migrating
>files on an AIX 4.3.2 system. The version of adsm.client.aix42.hsm is
>3.1.20.8, one of the most recent ADSM packages. Anyway, the high migration
>threshold is set below the percent used for the filesystem, Space Managem
Hi all,
TSM server 3.7.20.0
TSM client 3.7.2.0
One of our netware clients every night reports numerous ANS1228E errors in its
error log during its backup
"ANS1228E Sending of object 'object-nameobject-nameobject-name' failed
Explanation: The specified file (object-name) cannot be sent t
Jeff,
thanks for explaining this.
If there was an APAR opened, does that mean there is a fix i could download
somewhere ?
Stan
Jeff Bach <[EMAIL PROTECTED]> on 13/06/2001 18:36:35
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:(bcc: Stan Vern
From: Xavier 1 Chavanet
In november 2000, we decided to order an L700 and LTO IBM drives. STK had said
that the IBM LTO drives will be available in january 2001 and we plan to install
it in february. This configuration is supported fully supported by Tivoli.
The L700/IBM LTO was delayed to febru
hello all,
I have encountered a database deadlock and I was wondering if anyone can
explain to me how to read the following output. Is it possible to find out
what causes the deadlock?
Operation Results
A Deadlock was found:
Transaction 0:34806584.
Waiting for Lock mode sLock on: Type=19001, N
83 matches
Mail list logo
