On Thu, Jun 08, 2017 at 03:10:33PM -0300, Friedrich Locke wrote:
> Hi folks,
>
> i burnt and install61.iso cd and tried to boot uefi, but could not.
> Does anybody know this amd64 6.1 install image support booting UEFI ?
>
> Thanks in advance
The iso does not handle uefi at the moment. Write in
On Tue, Aug 15, 2017 at 09:48:14AM -0400, Patrick Wildt wrote:
> On Mon, Aug 14, 2017 at 10:08:13PM +0300, valerij zaporogeci wrote:
> > 2017-08-14 10:21 GMT+03:00, Alex Naumov :
> > > Hello,
> > >
> > > there is one enthusiast, who wants to make it possible:
> > > http://openbsd-archive.7691.n7.na
On Mon, Aug 21, 2017 at 12:17:20AM +1000, Jonathan Gray wrote:
> On Tue, Aug 15, 2017 at 09:48:14AM -0400, Patrick Wildt wrote:
> > On Mon, Aug 14, 2017 at 10:08:13PM +0300, valerij zaporogeci wrote:
> > > 2017-08-14 10:21 GMT+03:00, Alex Naumov :
> > > > Hello
On Sun, Aug 27, 2017 at 03:04:58PM +0200, Remi Locherer wrote:
> Hi,
>
> recently I bought a Asus UX390. It's very small and light notebook
> (less than 1 kg!). OpenBSD runs fine on it. Only its touchpad is not
> supported.
>
> In the dmesg this is shown (full dmesg at the bottom):
> "ELAN1301" a
On Tue, Sep 26, 2017 at 05:35:40PM -0700, James A. Peltier wrote:
> Hi Misc,
>
> I am running the latest OpenBSD snapshot and it appears that the 10Gb cards
> that we have in the unit aren't recognized or configured properly. I had a
> look at pcidevs and pcidevs.h files in src/dev/pci and it a
On Wed, Sep 27, 2017 at 03:53:26AM -0700, James A. Peltier wrote:
> - On 26 Sep, 2017, at 20:25, Jonathan Gray j...@jsg.id.au wrote:
>
> | On Tue, Sep 26, 2017 at 05:35:40PM -0700, James A. Peltier wrote:
> |> Hi Misc,
> |>
> |> I am running the latest OpenBSD s
On Tue, Oct 17, 2017 at 04:48:19PM -0700, Carlos Cardenas wrote:
> Howdy.
>
> I found a working USB (Sandisk Cruzer Fit 8GB) to install 6.2 on a RPI3.
>
> Install went fine and so was first boot, then I noticed that relinking
> the kernel failed.
>
> Below is my dmesg and error log.
>
> I thoug
On Wed, Apr 25, 2018 at 03:10:15AM -0400, Joseph Mayer wrote:
> Hi!
>
> Radeon drivers are specific per Radeon microarchitecture and Radeon
> microarchitecture version.
>
> The Radeon microarchitectures to date are TS 1, TS 2, TS 3, GCN 1, GCN
> 2, GCN 3, GCN 4, GCN 5 (TS = TeraScale and GCN = G
On Wed, Apr 25, 2018 at 10:49:53AM -0400, Joe Gidi wrote:
>
> > On Wed, Apr 25, 2018 at 09:08:12PM +1000, Jonathan Gray wrote:
> >> drivers/gpu/drm/amd in linux has over 1.5 million lines of code. Which
> >> is multiple times larger than the complete OpenBSD kernel sou
On Sat, Aug 04, 2018 at 09:33:45AM +0300, Kihaguru Gathura wrote:
> Hi,
>
> I am getting message: bioctl: Can't open /dev/bio: Device not configured
>
> No clue whatsoever on how to go about this. Please assist.
>
> Instructions
> --
>
On Sat, Aug 04, 2018 at 05:37:11PM +1000, Jonathan Gray wrote:
> On Sat, Aug 04, 2018 at 09:33:45AM +0300, Kihaguru Gathura wrote:
> > Hi,
> >
> > I am getting message: bioctl: Can't open /dev/bio: Device not configured
> >
> > No clue whatsoever
On Sat, Aug 04, 2018 at 06:38:20PM +1000, Jonathan Gray wrote:
> On Sat, Aug 04, 2018 at 05:37:11PM +1000, Jonathan Gray wrote:
> > On Sat, Aug 04, 2018 at 09:33:45AM +0300, Kihaguru Gathura wrote:
> > > Hi,
> > >
> > > I am getting message: bioctl: Can&#x
On Sun, Aug 05, 2018 at 10:39:10AM +0200, Janne Johansson wrote:
> Is there MAKEDEV things to add also?
No, the MAKEDEV and conf.c parts are already there.
It should be possible to use softraid with ramdisks on arm* with future
snapshots, just not as a boot volume.
On Wed, Sep 19, 2018 at 12:27:29AM +0200, Leo Unglaub wrote:
> Hi,
> today I got my new Laptop. A Lenovo ThinkPad E485 with an AMD Ryzen CPU. I
> installed the latest OpenBSD -current on the device and a lot of stuff work
> very well. I used the traditional installation method without EFI. Only Wif
On Wed, Sep 19, 2018 at 03:03:12AM +0200, Leo Unglaub wrote:
> > > The only big problem I have is that as soon as I start X I cannot use the
> > > keyboard correctly. Every time I type a character on the keyboard it gets
> > > repeated multiple times. Most often it gets repeated between 3 and 7
>
On Thu, Nov 15, 2018 at 09:15:48PM -0700, Andy Bradford wrote:
> Hello,
>
> I recently installed OpenBSD 6.4 amd64 and radeondrm fails to load
> properly. I then installed OpenBSD 6.4 i386 on the same hardware (to a
> USB pendrive) and it works fine. Any ideas?
There are many ways of gett
On Sun, Nov 18, 2018 at 10:47:10PM -0700, Andy Bradford wrote:
> Thus said Jonathan Gray on Sat, 17 Nov 2018 14:08:53 +1100:
>
> > There are many ways of getting an atom bios it would be helpfull to
> > know which method is having trouble.
>
> Thanks for the suggestio
On Sat, Mar 07, 2020 at 08:50:44PM -0400, Jon Whalen wrote:
> Hi there,
>
> I also receive these errors as well as hangs on an old Dell Inspiron
> 1525 with OpenBSD, several releases of Ubuntu Linux, and NetBSD 9.0.
> My unqualified assumption is that it's an Intel i915 driver issue and
> not an a
On Mon, Jun 29, 2020 at 11:13:49PM -0500, Charlie Burnett wrote:
> Hi,
>
> Wasn’t sure who to tell this to, but with Vega 20 hardware under -current,
> there is an issue with the firmware, where it cannot load. Manually
> installing the latest amdgpu firmware from kernel.org fixes this seemingly.
On Mon, Jun 29, 2020 at 11:59:28PM -0500, Charlie Burnett wrote:
> For sure, whatever helps!
> Jun 27 18:58:21 tabr /bsd: [drm] *ERROR* sdma_v4_0: Failed to load firmware
> "amdgpu/vega20_sdma.bin"
> Jun 27 18:58:21 tabr /bsd: [drm] *ERROR* Failed to load sdma firmware!
> Jun 27 18:58:21 tabr /bsd:
On Sun, Jul 05, 2020 at 09:18:55PM +0100, testing999...@zohomail.eu wrote:
> i can't get any u-boot serial output from miniroot67.fs on a raspberry
> pi 3. i'm using a 'FTDI232' which cost ~$4 - USB to 3.3V jumper
> cables, connecting TX to RX and vice versa on GPIO header.
>
> my serial console
On Sun, Jul 19, 2020 at 01:13:51AM -0400, jcm...@gmail.com wrote:
> I saw that much of the amdgpu related drm code had been updated against
> linux 5.7 and decided to try it out using a recent snapshot. While the
> amdgpu module loads and is able to mirror to both of my displays when in
> a tty, a
On Sun, Jul 19, 2020 at 04:36:37PM +1000, Jonathan Gray wrote:
> On Sun, Jul 19, 2020 at 01:13:51AM -0400, jcm...@gmail.com wrote:
> > I saw that much of the amdgpu related drm code had been updated against
> > linux 5.7 and decided to try it out using a recent snapshot. While
On Sat, Aug 08, 2020 at 10:23:13AM -0600, Andy Bradford wrote:
> Hello,
>
> I put OpenBSD 6.7 on an older PC that used to run OpenBSD 6.3 and X just
> fine. xenodm refuses to start. Is there something I can do to make this
> work (edit sources in xenocara or kernel and recompile), or should I
On Sun, Aug 09, 2020 at 10:01:43AM -0600, Andy Bradford wrote:
> Thus said Jonathan Gray on Sun, 09 Aug 2020 12:39:36 +1000:
>
> > When this came up previously running i386 resulted in being able to
> > read the atombios. Can you confirm that is the case here?
>
>
On Sun, Aug 23, 2020 at 08:15:01AM +0200, Matthias wrote:
> How do I figure out which packages directly or indirectly depend on a
> specific package? Let's assume that only installed packages shall be
> considered.
>
> For example, if 'glib2' is the package in question, 'cairo',
> 'gdk-pixbuf', 's
On Sat, Oct 17, 2020 at 09:51:49PM +0200, Marco Scholz wrote:
> I am running 6.8 #116 amd64 on a Thinkpad T495s (AMD Ryzen). Firefox
> keeps freezing X. No problem with 6.7.
>
> Does anybody have this problem too?
There are changes coming to the memory handling in drm.
The drm_mm changes in snaps
On Mon, Oct 19, 2020 at 01:28:50PM +0200, Harald Dunkel wrote:
> Hi folks,
>
> I am about to order 2 network appliances, providing an
> "Inphi CS4223 for 4x 10GbE SFP+".
>
> Does this ring a bell? Is this already supported by 6.8? Other
> technical specs can be found on
>
> https://www.ibase.com
On Wed, Oct 21, 2020 at 11:13:59AM -0500, flint pyrite wrote:
> Question: is the amdgpu(4) manual page up to correct and up to date?
>
> https://man.openbsd.org/amdgpu
The man page is for the xorg driver.
>
> I set up an xorg.conf file in /etc/X11/xorg.conf and was trying to get
> AMDgpu workin
On Thu, Oct 22, 2020 at 10:37:31PM -0400, Brad Smith wrote:
> On 10/22/2020 9:59 PM, Kevin Shell wrote:
> > Hello misc@.
> >
> > I want to try out OpenBSD UEFI.
> > How to install OpenBSD with UEFI boot on qemu?
> The installer does prompt you during disk setup.
> > The install68.iso has no UEFI s
On Wed, Jul 17, 2019 at 01:32:37PM +0200, Stefan Sperling wrote:
> On Wed, Jul 17, 2019 at 01:15:26PM +0200, oxst...@gmx.net wrote:
> > Hello,
> >
> > I recently installed OpenBSD 6.5 on an i386 router.
> > The intallation process went fine. However, I got a black screen after
> > rebooting.
> >
On Fri, Aug 02, 2019 at 03:11:54AM -0500, Charlie Burnett wrote:
> Hey-
> I'd been messing around with the AMDGPU on current (which I'm aware is very
> experimental) and had very few issues with it using a Vega 56 GPU. I
> recently swapped to another Vega GPU (Radeon VII) and have issues with the
>
On Fri, Aug 02, 2019 at 09:19:09AM +0100, Andy Lemin wrote:
> Hi list,
>
> I know this is a rather classic question, but I have searched a lot on this
> again recently, and I just cannot find any conclusive up to date information?
>
> I am looking to buy the best 1Gbe NIC possible for OpenBSD an
On Tue, Aug 20, 2019 at 09:43:48AM +0300, wrote:
> Hello,
> When I start eduke32 with LD_PRELOAD=/usr/X11R6/lib/libGL.so.17.0 so it
> can run in opengl,
> on ion fury it freezes after starting the game and whole machine becomes
> unresponsive for some time. I can ssh to it from my cel
m having to start from scratch?
> Best regards,
> Charlie Burnett
>
> On Thu, Aug 1, 2019 at 11:06 PM Jonathan Gray wrote:
>
> > On Fri, Aug 02, 2019 at 03:11:54AM -0500, Charlie Burnett wrote:
> > > Hey-
> > > I'd been messing around with the AMDGPU on
amdgpu tracks the linux-4.19.y (lts) branch of linux-stable
currently this is 4.19.69
On Wed, Sep 04, 2019 at 10:28:51AM -0500, Charlie Burnett wrote:
> Thanks for the advice!
> Do you happen to have a link to the commit amdgpu is at currently?
>
> On Wed, Sep 4, 2019 at 9:44 AM J
On Sat, Sep 21, 2019 at 12:29:59PM +0200, Solene Rapenne wrote:
> On Tue, Aug 20, 2019 at 05:40:50PM +1000, Jonathan Gray wrote:
> > On Tue, Aug 20, 2019 at 09:43:48AM +0300, wrote:
> > > Hello,
> > > When I start eduke32 with LD_PRELOAD=/usr/X11R6/lib/lib
On Sat, Sep 21, 2019 at 02:37:21PM +0200, Solene Rapenne wrote:
> On Sat, Sep 21, 2019 at 09:34:35PM +1000, Jonathan Gray wrote:
> > On Sat, Sep 21, 2019 at 12:29:59PM +0200, Solene Rapenne wrote:
> > > On Tue, Aug 20, 2019 at 05:40:50PM +1000, Jonathan Gray wrote:
> > >
On Fri, Sep 27, 2019 at 08:01:53PM -0400, Joe Gidi wrote:
> Hello,
>
> I've seen a number of recent commits for the rk3288 SoC, so I dug out my
> Tinker Board and tried to install the latest snapshot (miniroot dated
> 27-Sep-2019 06:14).
>
> I followed the updated directions for this chip:
>
>
On Sun, Sep 29, 2019 at 06:42:08PM -0700, Travis Cole wrote:
> I've been banging my head on this one long enough that I figured I'd just ask
> the list if anyone else is seeing this behavior.
>
> I'm getting really inconsistent xcursor behavior.
>
> I've tried setting a few xcursor themes, and t
On Wed, Dec 25, 2019 at 01:57:01PM +0530, putridsou...@gmail.com wrote:
> I'm running openbsd 6.6-current Dec24 snapshot
>
> The browser works perfectly within X.
> But fails without it.
> Following output is given by command:netsurf-fb -v
>
> (0.00) utils/log.c:264 nserror nslog_init(nslog_
On Wed, Dec 25, 2019 at 04:20:04PM +0530, putridsou...@gmail.com wrote:
> The port maintainer has confirmed both sdl and x interface
> for netsurf-fb require X.
> Is it possible to modify sdl source code to work with openbsd
> framebuffer driver? In my case it's inteldrm driver.
There is old cod
On Fri, Jan 10, 2020 at 10:06:41AM +0100, Jan Stary wrote:
> On Jan 09 11:44:25, h...@stare.cz wrote:
> > Installing bsd 100% |**| 6248 KB00:05 ETA
> > Installing bsd.rd 100% |**| 11229 KB00:10 ETA
> > Installing base66.tgz 100%
On Wed, Jan 22, 2020 at 11:30:51PM +0300, Özgür Kazancci wrote:
> Hello everyone! Greetings to misc people!
>
> Got a brand new dedicated server with a hardware: Intel Xeon-E 2274G - 64GB
> DDR4 ECC 2666MHz - 2x SSD NVMe 960GB
> and installed "brand new" OpenBSD 6.6 on it. (I'm managing it remotel
For i386/amd64 you have to tell boot you want serial output
either at the boot prompt or via boot.conf.
stty com0 115200
set tty com0
On Mon, Oct 19, 2015 at 10:34:15PM -0400, Daniel Ouellet wrote:
> Hi,
>
> I am trying to load OpenBSD on this box and no matter what I try I end
> up not being ab
On Tue, Oct 20, 2015 at 12:10:39PM +0200, Sebastien Marie wrote:
> On Tue, Oct 20, 2015 at 11:09:58AM +0200, Kim Zeitler wrote:
> > Hello
> >
> > On 10/19/15 19:58, Sebastien Marie wrote:
> > >
> > >RELEASE 5.8 returns ENOSYS ("Function not implemented") on tame(2) call
> > >(which is the old name
On Tue, Oct 20, 2015 at 02:12:35PM +0200, Mark Kettenis wrote:
> > > For i386/amd64 you have to tell boot you want serial output
> > > either at the boot prompt or via boot.conf.
> > >
> > > stty com0 115200
> > > set tty com0
> >
> >
> > OpenBSD 5.8 (GENERIC.MP) #1236: Sun Aug 16 02:31:04 MDT 2
On Wed, Oct 21, 2015 at 05:07:32PM +0200, Christoph R. Murauer wrote:
> Hello !
>
> Don't tread this post as bug. If it works nice - if not also no
> problem because I don't need it really.
>
> I have a W541 where suspend works but resume not.
>
> The machine has no serial port. But beside the i
On Wed, Oct 28, 2015 at 10:18:26PM -0400, Dewey Hylton wrote:
> i like these little boxes; they are silent and stable and perfect for plenty
> of my projects. this new version promises to be better than the several fit2
> machines i have scattered around customer sites, affording more cores and
> m
On Thu, Oct 29, 2015 at 10:15:26AM -0400, Dewey Hylton wrote:
> On Wed, Oct 28, 2015 at 11:35 PM, Jonathan Gray wrote:
>
> > On Wed, Oct 28, 2015 at 10:18:26PM -0400, Dewey Hylton wrote:
> > > i like these little boxes; they are silent and stable and perfect for
> >
On Fri, Oct 30, 2015 at 11:32:16AM -0400, Dewey Hylton wrote:
> >
> didn't have -current onhand, but was able to perform this function on a 5.8
> system ... i have 3 of these devices i'd really like to get going on
> openbsd. THANKS!
...
> Invalid PHY ID 0xA0044E90
This shouldn't be possible, pe
On Sat, Oct 31, 2015 at 11:20:40AM -0400, Dewey Hylton wrote:
> >
> > THANKS for your time and assistance.
> >
> > i now have enough networking to commence an installation, which is in
> > progress. i'll have to build
> > and copy in a new kernel of course to use the booted system afterward.
> > as
On Mon, Nov 02, 2015 at 08:55:40PM -0500, Dewey Hylton wrote:
> On Sat, Oct 31, 2015 at 11:20 AM, Dewey Hylton
> wrote:
>
> > 2015-10-31 10:56 GMT-04:00 Dewey Hylton :
> >
> >> On Sat, Oct 31, 2015 at 12:49 AM, Jonathan Gray wrote:
> >>
> >>&
On Wed, Nov 04, 2015 at 10:15:11AM +0100, Stefan Sperling wrote:
> On Wed, Nov 04, 2015 at 01:53:33PM +0530, Jay Patel wrote:
> > "Attansic Technology AR8172" rev 0x10 at pci1 dev 0 function 0 not
> > configured
>
> That's your ethernet device. The 'not configured' message means
> there is no dri
Which release or snapshot are you running? For the version of the file
Reyk pointed you at you'll need a -current snapshot.
On Thu, Nov 05, 2015 at 12:58:29PM -0500, Toyam Cox wrote:
> This got me past that error pretty handidly.
>
> However, now it is complaining about no index.txt. The path gi
15 06:40:17 - 1.30
+++ ikeca.c 19 Aug 2015 12:25:59 - 1.33
@@ -1,4 +1,4 @@
-/* $OpenBSD: ikeca.c,v 1.30 2015/01/16 06:40:17 deraadt Exp $ */
+/* $OpenBSD: ikeca.c,v 1.33 2015/08/19 12:25:59 reyk Exp $ */
/*
* Copyright (c) 2010 Jonathan Gray
@@ -82,13 +82,39 @
On Mon, Nov 16, 2015 at 06:02:38PM +, Mike Cond wrote:
> Hello, that is my first post on openbsd mailing list.
> I have installed openbsd 5.8 stable on HP Elitebook 2540p and encountered a
> problem with sound system.
> It's a Intel HD 3400 version 0.5 . The kernel uses azalia driver.
> There i
On Wed, Nov 18, 2015 at 03:30:57PM +, OpenBSD user wrote:
> Dear misc@,
>
> It would be really nice if someone could give me any hint(s) on how to
> get a native 1920x1200 working on VGC-LV50DB. As it is, only 1600x1200
> works out of the box.
>
> Right side of the monitor results in black 32
On Thu, Nov 26, 2015 at 11:51:03AM -0500, Joe Gidi wrote:
> The newly installed system boots successfully, but then it seems to fail
> to initialize video properly at the end of the boot process. My monitor
> goes into an endless cycle of trying to sync up. I can ssh in and see this
> in /var/log/m
On Fri, Nov 27, 2015 at 12:56:36AM +0100, Mikkel C. Simonsen wrote:
> Today I installed an Intel 82546EB dual-port NIC in a Fujitsu Siemens
> Futro S400, that I plan to use as a router/firewall.
>
> Only one of the interfaces shows up in dmesg, and it's not working after
> boot. Is this a known pr
The intel xorg driver requires inteldrm for mode setting.
Initial support for Broadwell/5500 was added to inteldrm
after 5.8 and is available in -current/snapshots.
On Mon, Dec 14, 2015 at 05:29:19PM +, Mark Carroll wrote:
> I'm following the OPENBSD_5_8 tag for src and xenocara on a system t
On Mon, Dec 28, 2015 at 12:25:25AM +0200, Mihai Popescu wrote:
> Hello,
>
> I am running cwm and I had some problems starting chrome from the menu
> - it starts for the very first time when i click on the menu, then i
> have to click 2 or 3 times on menu entry to start chrome again. This
> is not
On Mon, Jan 18, 2016 at 10:41:43AM +0100, Hvard Farberg wrote:
> Is it the case that 3D acceleration does not work for AMD
> PITCAIRN-based GPUs in X on OpenBSD 5.8?
>
> Is there any documents describing what features work on what GPUs?
Everything should work on northern islands cards and below.
On Thu, Jan 21, 2016 at 11:40:41AM +0100, Stefan Sperling wrote:
> On Thu, Jan 21, 2016 at 12:27:06PM +0200, Kapetanakis Giannis wrote:
> > Hi,
> >
> > I'm constantly seeing this on my pf router.
> > rule 61/(ip-option) pass in on $ext_if: $ext_gw > 224.0.0.1: igmp query [tos
> > 0xc0] [ttl 1]
> >
On Fri, Jan 29, 2016 at 04:18:04PM +0100, Paul de Weerd wrote:
> Hi Ben,
>
> Upon another close inspection of your dmesg and mine, I don't think
> the below diff will work for you...
>
> This is in my machine:
>
> | + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82801HBM_RAID,
> | + NULL,
On Thu, Feb 04, 2016 at 08:39:43AM +, David Dahlberg wrote:
> Am Mittwoch, den 03.02.2016, 15:29 -0500 schrieb Samir Parikh:
> > I am running version 5.8 (amd64) on a Lenovo Thinkpad T450s
> > with a fairly default installation.
>
> The T405s is a Broadwell.
>
> > I have a few issues to sor
On Sat, Nov 18, 2017 at 07:43:03PM +, Timothy Legge wrote:
> @Maurice, Don't worry about teaching me to suck eggs, I'd rather cover all
> the bases :)
>
> I've run "fw_update -a" to ensure that the drivers are installed and where
> they need to be. (Bit overkill I know, but I'd rather be sure
+, Timothy Legge wrote:
> I copy/pasted "OLAND Radeon HD 8000 series" from the radeon(4)
> <https://man.openbsd.org/radeon> man page under the section header
> "Supported Hardware". Maybe I'm missing something.
>
> On 19 November 2017 at 01:08, Jona
and Instruction set.
>
> Hopefully it's something that will be supported in the not too distant
> future.Until then, it's back in my box.
>
> Thanks all.
>
> On 19 November 2017 at 01:34, Jonathan Gray wrote:
>
> > The userland driver that page describes w
On Mon, Dec 04, 2017 at 01:37:53PM +0900, Tuyosi T wrote:
> i install openbsd 6.2 into mac pro 2006 .
> (boot by fedora's grub )
>
> but i cannot hear sound .
>
> $ dmesg | grep audio
> audio0 at azalia0
>
> $ dmesg | grep azalia
> azalia0 at pci0 dev 27 function 0 "Intel 6321ESB HD Audio" rev 0
On Mon, Jan 22, 2018 at 10:43:03AM -0800, Bryan Vyhmeister wrote:
> I have been looking at the new Lenovo ThinkPad A275 which is much like
> the X260/X270 but with AMD Pro A10 or A12 chip and graphics. I am
> interested in looking at something other than Intel for the first time
> in more than a de
On Mon, Jan 22, 2018 at 07:06:32PM -0800, Bryan Vyhmeister wrote:
> On Tue, Jan 23, 2018 at 11:57:35AM +1100, Jonathan Gray wrote:
> > On Mon, Jan 22, 2018 at 10:43:03AM -0800, Bryan Vyhmeister wrote:
> > > I have been looking at the new Lenovo ThinkPad A275 which is much like
&
On Sat, Feb 10, 2018 at 03:18:22PM -0800, Raymond Lillard wrote:
> I have a Dell M6500 Precision workstation with an Nvidia FX 3800M.
>
> I would like to wipe it and install OBSD. I can get a Firepro M7820
> for it.?? If I do, will any of the OBSD drivers work or will I
> be stuck with fb performa
On Sat, Mar 03, 2018 at 06:48:21AM -0600, ed...@pettijohn-web.com wrote:
>
> On Mar 3, 2018 5:52 AM, Z Ero wrote:
> >
> > "libGL error: failed to open drm device: Permission denied
> > libGL error: failed to load driver: i965"
> >
> > I can solve it by changing the permissions on /dev/drm0 to rw
On Sun, Mar 11, 2018 at 12:15:11AM +, Kaashif Hymabaccus wrote:
> Hello
>
> I have a sparc64 machine with no real graphics card, only the onboard
> Mach64 framebuffer. I found an ATI Radeon 9200 and decided to see if
> it works, then I could run X, test some graphical ports, etc.
>
> My probl
On Thu, Mar 15, 2018 at 10:10:18PM -0700, Mike Larkin wrote:
> On Thu, Mar 15, 2018 at 11:55:53PM -0500, Z Ero wrote:
> > If the adapter is ejected before closing the laptop lid there is no
> > problem waking from sleep. But is a minor inconvenience to eject the
> > adapter. Would it be possible to
On Sat, Mar 17, 2018 at 10:40:55PM +0100, Robert wrote:
> Hi,
>
> Since about two weeks the X server keeps crashing (segfault) most of the
> time when I start it (through xenodm).
> I have to restart it (rcctl restart xenodm) about 5-10 times
> until I get an (xfce) session that stays stable.
>
On Thu, Mar 22, 2018 at 07:21:33PM +0100, Robert wrote:
> On Tue, 20 Mar 2018 22:11:21 +0100
> Robert wrote:
> > I am happy to report that with the latest snapshot (20.3.) the
> > crashing problem seems to be gone.
>
> Well, that was an early celebration.
> The problem occured again; guess I just
On Fri, Mar 23, 2018 at 06:12:26PM +0100, Freen wrote:
> Hi all
>
> I have installed OpenBSD 6.2 AMD64 on my old PC consisting of:
> Motherboard: MSI K8N Neo2 Series (MS-7025);
> Graphic card: Sapphire (ATI) Radeon 9550/X1050 Series (RV350) AGP 8x.
>
> Unfortunately, things don't work very well:
On Tue, Apr 03, 2018 at 01:36:57PM +0200, Maurice Janssen wrote:
> Hi,
>
> I just installed 6.3 and it seems to work great.
> I've a question about the microcode. Is there a way to check whether an
> updated microcode was installed??? I have an i5 Ivybridge CPU and the Intel
> microcode is in /etc
On Fri, Apr 13, 2018 at 09:19:23AM -0700, jungle Boogie wrote:
> On 13 April 2018 at 08:30, jungle Boogie wrote:
> > Hi All,
> >
> > So between Peter Hessler's post here:
> > https://bsd.network/@phessler/99389809617980837
> >
> > And the install instructions for arm64:
> > https://ftp.openbsd.org
On Fri, Apr 13, 2018 at 11:05:06AM -0700, jungle Boogie wrote:
> On 13 April 2018 at 09:39, Jonathan Gray wrote:
> > On Fri, Apr 13, 2018 at 09:19:23AM -0700, jungle Boogie wrote:
> >> On 13 April 2018 at 08:30, jungle Boogie wrote:
> >> > Hi All,
> >> &
On Wed, Nov 04, 2020 at 07:38:53AM +0100, Harald Dunkel wrote:
> Hi folks,
>
> after applying the recent 4 syspatches for 6.8 one (of 5) openBSD
> host ran into the kernel debugger. I missed the error message, but
> on a reboot there was a page fault. On another reboot there was no
> problem any m
On Sun, Dec 06, 2020 at 11:44:11AM -0800, Joseph Olatt wrote:
> Hi,
>
> I've started seeing the following error on my laptop along with
> associated temporary freezing of the system:
>
> drm:pid90783:intel_gt_reset *NOTICE* Resetting chip for stopped
> heartbeat on rcs0
> drm:pid90783:mark_
On Fri, Dec 25, 2020 at 12:34:36AM -0500, James Hastings wrote:
> On 13 Dec 2020, 13:27:48 +, Joel Carnat wrote:
> > Hello,
> >
> > I just got a Teclast F7 Plus laptop and installed OpenBSD 6.8-current on
> > it. Most things works except apm and touchpad
> >
> > Using zzz or ZZZ, it seems suspe
On Wed, Jan 13, 2021 at 04:10:46AM +0200, Mihai Popescu wrote:
> I took the chance and installed from a recent snapshot - 12.01.2021. I got
> a kernel panic at first boot after install, related to missing firmware for
> radeondrm.
> I disabled the radeondrm then the boot process was fine and I inst
On Sun, Jan 17, 2021 at 03:45:19AM +, ocelot wrote:
> Hey guys. I'm trying to install OpenBSD on a laptop, but the UEFI boot
> manager doesn't see the DVD. The laptop is a Dell with a Ryzen 4700U,
> and only has UEFI boot capability.
>
> The ISO I'm using is the latest version, 6.8. The ISO ha
On Fri, Jan 22, 2021 at 06:58:05PM -0600, John Batteen wrote:
> Hi misc,
>
> I just bought a TP-link TG-3468, and the chip says 8168h on it, but it is not
> recognized by 6.8-current. Is this chip truly unsupported or just
> unrecognized?
>
> Thanks,
>
> John
>
> The line from dmesg is:
> ve
On Sat, Jan 23, 2021 at 08:53:44AM -0600, John Batteen wrote:
> Just working in chronological order, this patch from j...@jsg.id.au was
> sufficient to make it work. I have not tried the subsequent patch from
> b...@comstyle.com, though I can if you want.
>
> re1 at pci4 dev 0 function 0 vendor
On Tue, Apr 06, 2021 at 11:09:07AM +0400, Michel von Behr wrote:
> Hi - (not a dev, just trying to use OpenBSD snapshot) whenever I try to
> launch Xorg, either via xenodm or startx, I'm getting a kernel panic,
> like "pool_do_get:
> drmobj : page empty" (I already sent an e-mail [1] to b...@openbs
On Wed, Apr 07, 2021 at 11:34:54AM +0100, Tom Smyth wrote:
> Try Current and 6.8 and see if you get a different result in each..
> dmesgs are key for getting help on this type of query ...
There is a snapshot dmesg in the bug report. I don't see a benefit to
6.8 or linux dmesgs.
On Sun, May 16, 2021 at 12:10:33PM +0200, Harald Dunkel wrote:
> And another attempt, see attachment.
>
> Seems I have to power cycle to make it boot.
There have been a few reports of this in the last few weeks.
An initial workaround patch is in
https://marc.info/?l=openbsd-bugs&m=162012367130138
On Mon, May 17, 2021 at 12:28:39AM +0300, Ilya Voronin wrote:
> I was able to fix boot error on t3a (AMD EPYC based) instances (kernel:
> protection fault trap at lapic_set_lvt:rdmsr) with this patch (tested
> against 6.9):
>
> Index: arch/amd64/amd64/lapic.c
>
On Thu, May 27, 2021 at 07:57:28AM +0200, Harald Dunkel wrote:
> On 5/17/21 12:27 AM, Antonino Sidoti wrote:
> > Hi,
> >
> > I also have this issue on a fresh install of 6.9 amd64. I reported it as a
> > bug last week to “bugs” mail list with all appropriate information. I can
> > confirm that p
On Sun, Jul 23, 2023 at 12:10:54AM +0200, Benjamin Stürz wrote:
> Hi misc@,
>
> I just got an old Thinkpad T40 with an ATI Mobility Radeon 7500 (32MB)
> and installed OpenBSD 7.3-release on it.
>
> Unfortunately GPU acceleration doesn't work,
> neofetch tells me that my GPU is llvmpipe.
>
> When
On Mon, Jul 24, 2023 at 03:17:26PM -0700, Courtney wrote:
> $ pkg_info | grep amd
> amd-firmware-20230719 microcode update binaries for AMD CPUs
It by no means covers all zen 2 models.
See /etc/firmware/amd/README
Family=0x17 Model=0x31 Stepping=0x00: Patch=0x0830107a Length=3200 bytes
Family
On Thu, Sep 28, 2023 at 11:23:03AM +, Gökhan Özdemir wrote:
> Hello,
>
> I have an Intel Arc A770 which requires force probe kernel parameter
> (i915.force_probe=56a0) on linux 6.1. Since current drm stack on OpenBSD is
> 6.1, I am looking for a way to find OpenBSD equivalent of force probe.
On Mon, Nov 27, 2023 at 11:30:23PM -, Stuart Henderson wrote:
> On 2023-11-27, Devin Reade wrote:
> > Once running snapshots, I initially configured the network for dwqe0.
> > It came up and I was able to ping hosts on the dwqe0 network, but
> > I noticed that carrier state seemed unpredictabl
On Mon, Nov 27, 2023 at 09:10:18PM -0700, Devin Reade wrote:
> On Tue, 2023-11-28 at 11:29 +1100, Jonathan Gray wrote:
>
> > STD_PHYID1 67C9
> > STD_PHYID2 DC00
> >
> > /sys/dev/mii/miivar.h
> [...]
>
> Thanks.
>
> So it looks li
On Sun, Jan 14, 2024 at 05:09:09AM +0300, S V wrote:
> Hello misc
>
> What tools devs are using to generate .h wsfont files from bdf?
>
> Thanks in advance
one way of doing it:
pkg_add bdf2psf psftools
(converters/bdf2psf sysutils/psftools)
bdf2psf --fb file.bdf /usr/local/share/bdf2psf/standa
1 - 100 of 638 matches
Mail list logo
