On Fri, Nov 27, 2015 at 12:56:36AM +0100, Mikkel C. Simonsen wrote:
> Today I installed an Intel 82546EB dual-port NIC in a Fujitsu Siemens
> Futro S400, that I plan to use as a router/firewall.
>
> Only one of the interfaces shows up in dmesg, and it's not working after
> boot. Is this a known problem, and is there a fix? Full dmesg attached.
>
> Mikkel C. Simonsen
It sounds like your system didn't setup the pci bar correctly.
pcidump -v will give more details on that.
0x8186 is unheard of for intel pci nics.
Be warned that machines with sis chipsets are horrible, I'm glad they
stopped making them a while back.
>
>
>
> OpenBSD 5.8 (GENERIC) #1066: Sun Aug 16 02:33:00 MDT 2015
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2
> cache) 1.01 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MPC,MMXX,3DNOW2,3DNOW
> real mem = 251084800 (239MB)
> avail mem = 233758720 (222MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 05/14/08, BIOS32 rev. 0 @ 0xfaa30, SMBIOS rev.
> 2.2 @ 0xf0000 (31 entries)
> bios0: vendor Phoenix Technologies, LTD version "6.00PG Rev. 4.00.0Q"
> date 05/14/2008
> bios0: FUJITSU SIEMENS FUTRO S400
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S1 S4 S5
> acpi0: tables DSDT FACP SSDT
> acpi0: wakeup devices USB0(S5) USB1(S5) USB2(S5) USB3(S5) AMR0(S4)
> UAR1(S5) UAR2(S5) PS2M(S5) PS2K(S4) PCI0(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0: C1(@1 halt!), PSS
> acpitz0 at acpi0: critical temperature is 100 degC
> acpibtn0 at acpi0: PWRB
> bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000!
> cpu0 at mainbus0: (uniprocessor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: PowerNow! K7 1001 MHz: speeds: 1000 800 667 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> 0:7:1: mem address conflict 0x100/0x10
> 0:7:1: mem address conflict 0x100/0x10
> 0:7:1: mem address conflict 0x100/0x100
> pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03
> sisagp0 at pchb0
> agp0 at sisagp0: aperture at 0xe8000000, size 0x4000000
> ppb0 at pci0 dev 1 function 0 "SiS 86C202 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
> pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFHSNJC-004G>
> wd0: 1-sector PIO, LBA48, 3815MB, 7813120 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 3,
> version 1.0, legacy support
> ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 5,
> version 1.0, legacy support
> ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 12
> ehci0: timed out waiting for BIOS
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "SiS EHCI root hub" rev 2.00z/1.00 addr 1
> em0 at pci0 dev 7 function 0 "Intel 82546EB" rev 0x01: cannot find mem space
> unknown vendor 0x8186 product 0x1010 (class network subclass ethernet,
> rev 0x01) at pci0 dev 7 function 1 not configured
> re0 at pci0 dev 9 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
> (0x1800), irq 15, address 00:90:dc:a3:5e:c3
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbc0: unable to establish interrupt for irq 12pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
> lm1 at wbsio0 port 0x290/8: W83697HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> umass0 at uhub1 port 2 configuration 1 interface 0 "TEAC TEAC FD-05PUB"
> rev 1.10/0.00 addr 2
> umass0: using UFI over CBI with CCI
> scsibus1 at umass0: 2 targets, initiator 0
> sd0 at scsibus1 targ 1 lun 0: <TEAC, FD-05PUB, 2000> ATAPI 0/direct
> removable
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on wd0a (558bcbde01142a1f.a) swap on wd0b dump on wd0b
