Ok,? i just managed to have scanimage working, i succesfully scanned an image following suggestions reported here:? https://alioth.debian.org/tracker/?group_id=30186&atid=410366&func=detail&aid=310912
i simply exported these variables:? ?export PIXMA_EXPERIMENT=1 export SANE_DEBUG_PIXMA=10 And now it seems to work (also with xsane).? The only problem now is that sometimes i receive the following timeout error:? [pixma] XML message sent to scanner: <?xml version="1.0" encoding="utf-8" ?><cmd xmlns:ivec="http://www.canon.com/ns/cmd/2008/07/common/";><ivec:contents><ivec:operation>EndJob</ivec:operation><ivec:param_set servicetype="scan"><ivec:jobID>00000001</ivec:jobID></ivec:param_set></ivec:contents></cmd> [pixma] XML response back from scanner: <?xml version="1.0" encoding="utf-8" ?> <cmd xmlns:ivec="http://www.canon.com/ns/cmd/2008/07/common/";> ? ? ? ? <ivec:contents> ? ? ? ? ? ? ? ? <ivec:operation>EndJobResponse</ivec:operation> ? ? ? ? ? ? ? ? <ivec:param_set servicetype="scan"> ? ? ? ? ? ? ? ? ? ? ? ? <ivec:response>OK</ivec:response> ? ? ? ? ? ? ? ? ? ? ? ? <ivec:response_detail/> ? ? ? ? ? ? ? ? ? ? ? ? <ivec:jobID>00000001</ivec:jobID> ? ? ? ? ? ? ? ? </ivec:param_set> ? ? ? ? </ivec:contents> </cmd> [pixma] pixma_read_image() failed ETIMEDOUT [pixma] Reader task terminated: ETIMEDOUT [pixma] read_image():reader task closed the pipe:0 bytes received, 1678578 bytes expected [pixma] pixma_close(): Canon PIXMA MX370 Series it seems to verify when the scanner is in sleep mode, that it took 3 or 4 seconds to wake-up. There is a way to manipulate that timeout? @Rolf:? I looked on the git version of the README. But still i cannot find anything related to my problem, but it seems that i solved it.? That file doesn't contain any helpful information on how to solve my problem. Cheers Ivan ----- Messaggio originale ----- Da: Rolf Bensch <rolf at bensch-online.de> A: Ivan G. <dreamos82 at yahoo.it> Cc: "sane-devel at lists.alioth.debian.org" <sane-devel at lists.alioth.debian.org> Inviato: Venerd? 28 Dicembre 2012 20:49 Oggetto: Re: Re: [sane-devel] Canon Pixma MX375 problem Hi Ivan, You can find an old version on the website: http://www.sane-project.org/README.linux. or the latest one in git; fetch a r/o clone with: '$ git clone git://git.debian.org/sane/sane-backends.git'. Cheers, Rolf Am 28.12.2012 19:22, schrieb Ivan G.: > Hi rolf, > > i lookedd at README.linux, but i cannot find where it can help me. > Since: > 1. i installed it using gentoo package manager > 2. the scanner is recognized by sane, but i get the error: >? ? ? ? ? scanimage: open of device pixma:04A91759_72024A failed: Operation >not supported > 3. The usb flag is set for sane package. > > Or maybe i missed the point with the solution in README.linux? > > Any other idea? > > Cheers, > Ivan > > > > ----- Messaggio originale ----- > Da: Rolf Bensch <webmaster at bensch-online.de> > A: Ivan Ivello <dreamos82 at yahoo.it> > Cc: "sane-devel at lists.alioth.debian.org" <sane-devel at > lists.alioth.debian.org> > Inviato: Venerd? 28 Dicembre 2012 14:40 > Oggetto: Re: [sane-devel] Canon Pixma MX375 problem > > Hi Ivan, > > Please follow the installation description in README.linux. > > Cheers, > Rolf > > > Am 27.12.2012 23:26, schrieb Ivan Ivello: >> Hi all, >> >> i'm trying configure the Pixma MX375 scanner on gentoo, i followed steps >> done by Daniel on a previous post (here: >> http://lists.alioth.debian.org/pipermail/sane-devel/2012-August/030229.html) >> >> I installed sane-backends 1.0.23 with (compiled with? sane_backends_pixma >> use flag enabled) and activated debug mode. >> >> Then sane-find-scanner seems to find the scanner: >>? >>? ? # sane-find-scanner will now attempt to detect your scanner. If the >>? ? # result is different from what you expected, first make sure your >>? ? # scanner is powered up and properly connected to your computer. >> >>? ? # No SCSI scanners found. If you expected something different, make sure >>that >>? ? # you have loaded a kernel SCSI driver for your SCSI adapter. >> >> found USB scanner (vendora9 [Canon], product=0x1759 [MX370 series]) at >> libusb:002:005 >>? ? # Your USB scanner was (probably) detected. It may or may not be >>supported by >>? ? # SANE. Try scanimage -L and read the backend's manpage. >> >>? ? # Not checking for parallel port scanners. >> >>? ? # Most Scanners connected to the parallel port or other proprietary ports >> >> But any other command that try to access the scanner receive the following >> error: >> >> >> root ~#scanimage > test.pnm >> scanimage: open of device pixma:04A91759_72024A failed: Operation not >> supported >> >> Any idea? >> >> Regards, >> Ivan >> >> > > >
