Hi rolf,? i lookedd at README.linux, but i cannot find where it can help me.? Since: 1. i installed it using gentoo package manager 2. the scanner is recognized by sane, but i get the error: ? ? ? ? ??scanimage: open of device pixma:04A91759_72024A failed: Operation not supported 3.?The usb flag is set for sane package.?
Or maybe i missed the point with the solution in README.linux?? Any other idea?? Cheers,? Ivan ----- Messaggio originale ----- Da: Rolf Bensch <webmaster at bensch-online.de> A: Ivan Ivello <dreamos82 at yahoo.it> Cc: "sane-devel at lists.alioth.debian.org" <sane-devel at lists.alioth.debian.org> Inviato: Venerd? 28 Dicembre 2012 14:40 Oggetto: Re: [sane-devel] Canon Pixma MX375 problem Hi Ivan, Please follow the installation description in README.linux. Cheers, Rolf Am 27.12.2012 23:26, schrieb Ivan Ivello: > Hi all, > > i'm trying configure the Pixma MX375 scanner on gentoo, i followed steps done > by Daniel on a previous post (here: > http://lists.alioth.debian.org/pipermail/sane-devel/2012-August/030229.html) > > I installed sane-backends 1.0.23 with (compiled with? sane_backends_pixma use > flag enabled) and activated debug mode. > > Then sane-find-scanner seems to find the scanner: >? >? # sane-find-scanner will now attempt to detect your scanner. If the >? # result is different from what you expected, first make sure your >? # scanner is powered up and properly connected to your computer. > >? # No SCSI scanners found. If you expected something different, make sure >that >? # you have loaded a kernel SCSI driver for your SCSI adapter. > > found USB scanner (vendor=04a9 [Canon], product=0x1759 [MX370 series]) at > libusb:002:005 >? # Your USB scanner was (probably) detected. It may or may not be supported >by >? # SANE. Try scanimage -L and read the backend's manpage. > >? # Not checking for parallel port scanners. > >? # Most Scanners connected to the parallel port or other proprietary ports > > But any other command that try to access the scanner receive the following > error: > > > root ~#scanimage > test.pnm > scanimage: open of device pixma:04A91759_72024A failed: Operation not > supported > > Any idea? > > Regards, > Ivan > >
