Hi all,? i'm trying configure the Pixma MX375 scanner on gentoo, i followed steps done by Daniel on a previous post (here:?http://lists.alioth.debian.org/pipermail/sane-devel/2012-August/030229.html)?
I installed sane-backends 1.0.23 with (compiled with ?sane_backends_pixma use flag enabled) and activated debug mode.? Then sane-find-scanner seems to find the scanner: ? ? # sane-find-scanner will now attempt to detect your scanner. If the ? # result is different from what you expected, first make sure your ? # scanner is powered up and properly connected to your computer. ? # No SCSI scanners found. If you expected something different, make sure that ? # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04a9 [Canon], product=0x1759 [MX370 series]) at libusb:002:005 ? # Your USB scanner was (probably) detected. It may or may not be supported by ? # SANE. Try scanimage -L and read the backend's manpage. ? # Not checking for parallel port scanners. ? # Most Scanners connected to the parallel port or other proprietary ports But any other command that try to access the scanner receive the following error:? root ~#scanimage > test.pnm scanimage: open of device pixma:04A91759_72024A failed: Operation not supported Any idea? Regards, Ivan
