SuSE Linux 9.3 Professional x86_64 (64 bit) kernel 2.6.11.4 (x86_64) libusb-0.1.so.4.4.0 (libusb version 0.1.8) libsane.so.1.0.15 (sane version 1.0.15) Microtek ScanMaker 3600 (vendor=0x05da product=0x40ca) (Genius WebCam Web V4 (vendor=0458 product=700f))
"cat /proc/bus/usb/devices" ---cut here--- T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.11.4-20a-default ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0458 ProdID=700f Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=160mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 128 Ivl=1ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 192 Ivl=1ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 0 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 0 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 384 Ivl=1ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 0 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 0 Alt= 6 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 768 Ivl=1ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 0 Alt= 7 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms T: Bus=02 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=05da ProdID=40ca Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=60 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.11.4-20a-default ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms ---cut here--- - after my scanner power on: "tail /var/log/messages" ---cut here--- Apr 30 02:32:58 linux kernel: usb 2-10: new full speed USB device using ohci_hcd and address 3 Apr 30 02:33:00 linux kernel: scanner: unsupported module, tainting kernel. Apr 30 02:33:00 linux kernel: /usr/src/linux-2.6.11.4-20a/drivers/usb/image/scanner.c: USB scanner device (0x05da/0x40ca) now attached to usb/scanner0 Apr 30 02:33:00 linux kernel: usbcore: registered new driver usbscanner Apr 30 02:33:00 linux kernel: /usr/src/linux-2.6.11.4-20a/drivers/usb/image/scanner.c: 0.4.16:USB Scanner Driver Apr 30 02:33:00 linux kernel: /usr/src/linux-2.6.11.4-20a/drivers/usb/image/scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product - 5da:40ca Apr 30 02:33:00 linux /etc/hotplug.d/usb/50-usb.hotplug[8291]: setting permissions of /proc/bus/usb/002/003 ---cut here--- "sane-find-scanner" ---cut here--- # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. found USB scanner (vendor=0x05da, product=0x40ca) at /dev/usb/scanner0 found USB scanner (vendor=0x05da, product=0x40ca) at /dev/usbscanner found USB scanner (vendor=0x05da, product=0x40ca) at libusb:002:003 found USB scanner (vendor=0x0458, product=0x700f) at libusb:002:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. ---cut here--- "SANE_DEBUG_SM3600=255 scanimage -L" ---cut here--- [sanei_debug] Setting debug level of sm3600 to 255. [sm3600] SM3600 init [sm3600] SM3600 version: 1000005 No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). ---cut here--- 1) I add support for scanner.ko for recent 2.6.x kernel (http://www.linuxquestions.org/questions/showthread.php?s=&postid=851819) 2) create files libsane.usermap, libusbscanenr, sm3600, sm3600.usermap, scanner, sm3600 "cat /etc/hotplug/usb/libsane.usermap" ---cut here--- libusbscanner 0x0003 0x05da 0x40ca 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 ---cut here--- "cat /etc/hotplug/usb/libusbscanenr" ---cut here--- if [ -z "$DEVICE" ] ; then IF=`echo $DEVPATH | sed 's/\(bus\/usb\/devices\/\)\(.*\)-\(.*\)/\2/'` DEV=`echo $DEVPATH | sed 's/\(bus\/usb\/devices\/\)\(.*\)-\(.*\)/\3/'` DEV=`expr $DEV + 1` DEVICE=`printf '/proc/bus/usb/%.03d/%.03d' $IF $DEV` fi if [ "$ACTION" = "add" -a "$TYPE" = "usb" ]; then chmod 0666 "$DEVICE" fi ---cut here--- "cat /etc/hotplug/usb/sm3600" ---cut here--- #!/bin/sh cd /etc/hotplug . hotplug.functions mesg setting permissions of $DEVICE chown 777 $DEVICE ---cut here--- "cat /etc/hotplug/usb/sm3600.usermap" ---cut here--- sm3600 0x0003 0x05da 0x40ca 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x000000000 ---cut here--- "cat /etc/modprobe.d/scanner" ---cut here--- alias char-major-180 scanner options scanner vendor=0x05da product=0x40ca ---cut here--- "cat /etc/modprobe.d/sm3600" ---cut here--- alias char-major-180 sm3600 options sm3600 vendor=0x05da product=0x40ca ---cut here--- 3) edit files usb.usermap, usb.handmap, modules.alias, mudels.usbmap, dll.conf "cat /etc/hotplug/usb.usermap" ---cut here--- sm3600 0x0003 0x05da 0x40ca 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x000000000 libusbscanner 0x0003 0x05da 0x40ca 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x000000000 ---cut here--- "cat /etc/hotplug/usb.handmap" ---cut here--- 0x00 0x00 0x00 0x00000000 ---cut here--- "cat /lib/modules/2.6.11.4/modules.alias" (other lines with "alia xyz scanner" removed) ---cut here--- alias usb:v05DAp40CAdl*dh*dc*dsc*dp*ic*isc*ip* scanner ---cut here--- "cat /lib/modules/2.6.11.4/modules.usbmap" (other lines with "scanner xyz" removed) ---cut here--- scanner 0x0003 0x05da 0x40ca 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ---cut here--- "cat /etc/sane.d/dll.conf" ---cut here--- microtek microtek2 sm3600 ---cut here--- 4) Scanner do not working with or without support scanner.ko in recent 2.6.x kernel. some tryes: linux:/ # scanimage -d sm3600:/dev/usb/scanner0 >image.pnm scanimage: open of device sm3600:/dev/usb/scanner0 failed: Invalid argument linux:/ # scanimage -d sm3600:/dev/usbscanner >image.pnm scanimage: open of device sm3600:/dev/usbscanner failed: Invalid argument linux:/ # scanimage -d sm3600:/proc/bus/usb/002/003 >image.pnm scanimage: open of device sm3600:/proc/bus/usb/002/003 failed: Invalid argument linux:/ # scanimage -d sm3600:/libusb:002:003 >image.pnm scanimage: open of device sm3600:/libusb:002:003 failed: Invalid argument linux:/ # scanimage -d sm3600:libusb:002:003 >image.pnm scanimage: open of device sm3600:libusb:002:003 failed: Invalid argument linux:/ # scanimage -d microtek:/dev/usb/scanner0 >image.pnm scanimage: open of device microtek:/dev/usb/scanner0 failed: Invalid argument linux:/ # scanimage -d microtek:/dev/usbscanner >image.pnm scanimage: open of device microtek:/dev/usbscanner failed: Invalid argument linux:/ # scanimage -d microtek:/proc/bus/usb/002/003 >image.pnm scanimage: open of device microtek:/proc/bus/usb/002/003 failed: Invalid argument linux:/ # scanimage -d microtek2:/dev/usb/scanner0 >image.pnm scanimage: open of device microtek2:/dev/usb/scanner0 failed: Invalid argument linux:/ # scanimage -d microtek2:/dev/usbscanner >image.pnm scanimage: open of device microtek2:/dev/usbscanner failed: Invalid argument linux:/ # scanimage -d microtek2:/proc/bus/usb/002/003 >image.pnm scanimage: open of device microtek2:/proc/bus/usb/002/003 failed: Invalid argument Can You help me please how can I make Microtek ScanMaker 3600 working? Thank You very much for answer Petr Novak su.p...@seznam.cz
