On Sat, Apr 30, 2005 at 04:18:52AM +0200, su.p...@seznam.cz wrote: > SuSE Linux 9.3 Professional x86_64 (64 bit) > kernel 2.6.11.4 (x86_64) > libusb-0.1.so.4.4.0 (libusb version 0.1.8) > libsane.so.1.0.15 (sane version 1.0.15) > Microtek ScanMaker 3600 (vendor=0x05da product=0x40ca)
Petr, please answer just to me, not the lists, ok? :-) For the model: 0x40ca is supported. > "sane-find-scanner" Please note, that scanner.ko is *not* needed. There is no kernel support for sm3600 needed or suitable except the usbdev FS. So You might safely drop scanner.ko. > ---cut here--- > > "SANE_DEBUG_SM3600=255 scanimage -L" > ---cut here--- > [sanei_debug] Setting debug level of sm3600 to 255. > [sm3600] SM3600 init > [sm3600] SM3600 version: 1000005 Thats pretty much sparse. Is usbdevfs in place? $ cat /proc/mounts | grep usb usbdevfs /proc/bus/usb usbdevfs rw 0 0 It should read like, when there is no scanner attached: [sanei_debug] Setting debug level of sm3600 to 255. [sm3600] SM3600 init [sm3600] SM3600 version: 1000005 [sm3600] starting bus scan [sm3600] scanning bus 001 [sm3600] found dev 0000/0000 [sm3600] scanning bus 002 [sm3600] found dev 0000/0000 [sm3600] scanning bus 003 [sm3600] found dev 0000/0000 [sm3600] scanning bus 004 [sm3600] found dev 0000/0000 [sm3600] found dev 0B9B/4012 [sm3600] scanning bus 005 [sm3600] found dev 0000/0000 > Can You help me please how can I make Microtek ScanMaker 3600 working? Hope it helps... > > Thank You very much for answer > Petr Novak > su.p...@seznam.cz > > -- - Marian
