Hi Jan, is this scanner really a HP ScanJet 4200c. USB says that it is a ScanJet 6200c. But that doesn't matter. After the first (and only) scan has completed, do the following:
export SANE_DEBUG_HP=255 scanimage > hp.ppm 2>hp.lis and send hp.lis back to me. Sincerely Peter Jan Rüdiger schrieb: > Hi > > I try to connect a HP 4200C to my PC running SuSe 8.2 with Kernel 2.4.20 > and sane 1.0.11 (also tried 1.0.12). The Problem is that the scanner > only works for one scan after that sane doesn't find any devices. The > only solution is to reload the usb-uhci modul (rmmod/insmod usb-uhci) > I'm not sure if this is a kernel or sane problem, can someone please > point me in the ritght direction. > I'll access the scanner via libusb. I'll tested the scanner on 3 > different PC and the scanner works under w2k. > > scanimage -L reports: > No scanners were identified. ... > > but > > sane-find-scanner reports: > found USB scanner (vendor=0x03f0, product=0x0201) at libusb:001:002 > > cat /proc/bus/usb/devices gives: > P: Vendor=03f0 ProdID=0201 Rev= 1.00 > S: Manufacturer=Hewlett-Packard > S: Product=HP ScanJet 6200C > S: SerialNumber=0G95911204HL > > I also tried all tips from the hp-faq without any luck. > > thanks allot > > jan > > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net
