Hi Bob, looks like your SCSI-communication is not ok. The printouts are correct in some parts, but contain also some garbage. sane-find-scanner should print
found SCSI processor "HP C1130A 3540" at device /dev/scanner Can you check if you are using the right cable ? --Peter Bob Soukup wrote: > I have an HP ScanJet 4p (C1130A) here that I can't get sane to recognize. I > keep getting "no sane devices found". > > cat /proc/scsi/scsi gives: > Attached devices: > Host : scsi0 Channel: 00 Id: 02 Lun: 00 > Vendor: HP Model: C1 0A Rev: 35 > Type: Processor Ansi SCSI revision: ffffffff > > Doing "sane-find-scanner" yields: > found SCSI processor "HPml us C1li0Aqt .3 /d 35/h" at device /dev/scanner > found SCSI processor "HP/l al C1rc0Ari ir sr 35ST" at device /dev/sg0 > found SCSI processor "HPml us C1li0Aqt .3 /d 35/h" at device /dev/sga > > Doing SANE_DEBUG_HP reports that dev/scanner does not seem to be an HP > scanner. Also /dev/sg0 and /dev/sga report as not HP scanner. > > Anyone have suggestions as to how to get this puppy to work? > > Thanks > > Bob > > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > > -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net
