When you did the testing Brett, what version of ESX was running at that time, and what version is running now?
Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Brett Hanson Sent: Monday, April 28, 2008 9:05 PM To: Servers Alive Discussion List Subject: RE: [SA-list] VMWare check Ian, I did some testing of the VMWare check for Servers Alive back in December, 2007. I was able to get it working well enough to detect if a virtual machine was up or down, but after the testing was completed, I talked about the check with my contact in our infrastructure group and couldn't come up with a good use for the check. If we wanted to know if the machine was running or not, we would just ping the box. We have had problems in the past with VMWare where the virtual machine would be up and running, but would not respond to any network requests, so the VMWare check wouldn't detect the failure. I've just tried to get the check up and running again, but I can't remember all the details on the config. I do remember it required the VMWare-vm com api, which I think Dirk had to send me as it wasn't available from the vmware website anymore. Anyways, my config is now giving the message "No connection could be made because the target machine actively refused it." Something has changed with the VMWare server since I last tested against it, and I'm not sure what. Regards, Brett Hanson Systems Analyst, Agrium Inc. >>> "Dirk" <[EMAIL PROTECTED]> 4/28/2008 10:31:00 AM >>> Are you also trying towards ESX? Maybe that Brett Hanson can give some advice, he tested this towards ESX 3.02 back in December 2007 Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, April 28, 2008 6:05 PM To: Servers Alive Discussion List Subject: RE: [SA-list] VMWare check Noop, it doesn't work for me either. And when I try to configure the test I wonder why you would like to test if a machine is up on a specific host. If you use ESX, you most likely have HA and you don't care on which host a machine is running. To test if a machine is up and running, use ping and diskspace checks instead. Or am I missing something?? /Per >>> From: <[EMAIL PROTECTED]> To:Servers Alive Discussion List <[email protected]> Date: 2008-04-28 17:42 Subject: RE: [SA-list] VMWare check Ummm.... you're not giving me much to go on here! Is this check working for anyone else? Ian _________________________________ Ian K Gray OEL IS - European Infrastructure Support Tel: +44 1236 502661 Mob: +44 7881 518854 Ad eundum quo nemo ante iit "Dirk" <[EMAIL PROTECTED]> Sent by: Servers Alive Discussion List <[email protected]> 28/04/2008 16:10 Please respond to Servers Alive Discussion List <[email protected]> To Servers Alive Discussion List <[email protected]> cc Subject RE: [SA-list] VMWare check Well I can't tell you. This is what the Vmware APIs are returning, they don't tell us why Dirk Bulinckx. From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, April 28, 2008 4:56 PM To: Servers Alive Discussion List Subject: RE: [SA-list] VMWare check OK - so why am I getting "Invalid arguments: Login failed."? Don't say "because your arguments are invalid..." ;-) Ian _________________________________ Ian K Gray OEL IS - European Infrastructure Support Tel: +44 1236 502661 Mob: +44 7881 518854 Ad eundum quo nemo ante iit "Dirk" <[EMAIL PROTECTED]> Sent by: Servers Alive Discussion List <[email protected]> 28/04/2008 15:40 Please respond to Servers Alive Discussion List <[email protected]> To Servers Alive Discussion List <[email protected]>cc Subject RE: [SA-list] VMWare check I think it was pointing to the ESX server when the beta testers did testing with it. Dirk Bulinckx. From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, April 28, 2008 3:41 PM To: Servers Alive Discussion List Subject: [SA-list] VMWare check Hi, I'm trying the new VMWare check, but I'm having difficulty connecting. I'm using ESX. What I'm trying to do initially is bring up the list of virtual machines to choose from, from within the check configuration screen. If I point to the ESX host server itself, I get this error: Invalid arguments: Login failed. If I point to VirtualCenter server, I get this: Network failure: Cannot connect to host [our servername]: No connection could be made because the target machine actively refused it Which should I be pointing to? Why isn't it working? Cheers, Ian _________________________________ Ian K Gray OEL IS - European Infrastructure Support Tel: +44 1236 502661 Mob: +44 7881 518854 Ad eundum quo nemo ante iit ______________________________________________________________________________ Any opinions expressed in this email are those of the individual and not necessarily of the Company. This email and any files transmitted with it, including replies and forwarded copies (which may contain alterations) subsequently transmitted from the Company are confidential and solely for the use of the intended recipient. It may contain material protected by legal privilege. If you are not the intended recipient or the person responsible for delivering to the intended recipient, be advised that you have received this email in error and that any use is strictly prohibited. Please notify the sender immediately of the error and delete any copies of this message Warning: Although the Company has taken reasonable precautions to ensure that no viruses are present in this e-mail, the Company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. ______________________________________________________________________________ Any opinions expressed in this email are those of the individual and not necessarily of the Company. This email and any files transmitted with it, including replies and forwarded copies (which may contain alterations) subsequently transmitted from the Company are confidential and solely for the use of the intended recipient. It may contain material protected by legal privilege. If you are not the intended recipient or the person responsible for delivering to the intended recipient, be advised that you have received this email in error and that any use is strictly prohibited. Please notify the sender immediately of the error and delete any copies of this message Warning: Although the Company has taken reasonable precautions to ensure that no viruses are present in this e-mail, the Company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. ______________________________________________________________________________ Any opinions expressed in this email are those of the individual and not necessarily of the Company. This email and any files transmitted with it, including replies and forwarded copies (which may contain alterations) subsequently transmitted from the Company are confidential and solely for the use of the intended recipient. It may contain material protected by legal privilege. If you are not the intended recipient or the person responsible for delivering to the intended recipient, be advised that you have received this email in error and that any use is strictly prohibited. Please notify the sender immediately of the error and delete any copies of this message Warning: Although the Company has taken reasonable precautions to ensure that no viruses are present in this e-mail, the Company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. The contents of this e-mail are intended for the named addressee only. It contains information which may be confidential and which may also be privileged. The information including attachments in this e-mail may not be used, disclosed, copied or stored except for the purpose for which it has been sent. If you have received this e-mail in error, please immediately destroy it and notify us by phone or fax as above or by e-mail at: [EMAIL PROTECTED] Please note that FlexLink can assume no liability for any computer virus which might be transferred by way of this e-mail. Further information about FlexLink: www.flexlink.com To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.= To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. IMPORTANT NOTICE ! This E-Mail transmission and any accompanying attachments may contain confidential information intended only for the use of the individual or entity named above. Any dissemination, distribution, copying or action taken in reliance on the contents of this E-Mail by anyone other than the intended recipient is strictly prohibited and is not intended to, in anyway, waive privilege or confidentiality. If you have received this E-Mail in error please immediately delete it and notify sender at the above E-Mail address. Agrium uses state of the art anti-virus technology on all incoming and outgoing E-Mail. We encourage and promote the use of safe E-Mail management practices and recommend you check this, and all other E-Mail and attachments you receive for the presence of viruses. The sender and Agrium accept no liability for any damage caused by a virus or otherwise by the transmittal of this E-Mail. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.= To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
