I would suggest to explain the problem on the list and if it's an easy solution we can do it all on the list, else we'll take it off-list and send at the end the result to the list.
Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Bell Sent: Thursday, January 17, 2008 3:10 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Servers Alive stops checking OK thanks Dirk I also need some help with setting up trap receiver alerts. I am not getting the alerts but I see the counts going up. This is in the beta. Should I contact support or is this list sufficient for my needs Mark -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Thursday, January 17, 2008 8:56 AM To: Servers Alive Discussion List Subject: RE: [SA-list] Servers Alive stops checking After an install yes. For the registry change, only a restart of SA. Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Bell Sent: Thursday, January 17, 2008 2:25 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Servers Alive stops checking Is a reboot needed Mark via - Treo -----Original Message----- From: "Dirk Bulinckx" <[EMAIL PROTECTED]> To: "Servers Alive Discussion List" <[email protected]> Sent: 1/17/08 08:23 AM Subject: RE: [SA-list] Servers Alive stops checking Yes it is. Dirk Bulinckx. From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Bell Sent: Thursday, January 17, 2008 1:36 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Servers Alive stops checking No I didnââ'¬â"¢t This change is still needed for the latest build? ________________________________ From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Thursday, January 17, 2008 7:26 AM To: Servers Alive Discussion List Subject: RE: [SA-list] Servers Alive stops checking did you do the registry change explained on the beta page for build 2149? (on the beta that is) Dirk Bulinckx. From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Bell Sent: Thursday, January 17, 2008 1:01 PM To: Servers Alive Discussion List Subject: [SA-list] Servers Alive stops checking Running the latest beta and the Production release After adding a few *.nix Disk space checks using the free addon my installation seems to work fine for the first couple of cycles then just stops. The update button is grayed out and I have to exit and reopen the GUI This happens whether the new entries are enabled or in maintenance mode Please help Mark To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
