I got and ran the debugger ran the setup smtp test and got the following output (the equivalent
alert ran also I guess). The ip is good I’m using in my script. [2704] Woah, nellie! [3888] SA DEBUG wodHTTP done event start0-1 [3888] SA DEBUG wodHTTP done event end0-1 [3888] SA VB entry_thr_check_post start 0- 1 [3888] SA DEBUG start of alerting engine 0- 1 [3888] SA DEBUG end AlertEngine_ExecuteAlert (SMTPP) 0- 1 [3888] SA DEBUG end of AlertEngine_DoAlert 0- 1 [3888] SA DEBUG end AlertEngines_DoAlerts 0- 1 [3888] SA DEBUG end of alerting engine 0- 1 [3888] SA DEBUG end entry_thr_check_post 0- 1 [2704] Woah, nellie! [3888] Message: 16481287520070713.SA602056-1, Failed to Send, error description: Interrupted., error code: 0x800a4f4e [3888] Message: 16482623420070713.SA602056-1, Failed to Send, error description: Interrupted., error code: 0x800a4f4e [2704] Woah, nellie! [5524] [5524] 17:50:16:437 ParseCommandLine() [2704] Woah, nellie! [3888] SA DEBUG wodHTTP done event start0-1 [3888] SA DEBUG wodHTTP done event end0-1 [3888] SA VB entry_thr_check_post start 0- 1 [3888] SA DEBUG start of alerting engine 0- 1 [3888] SA DEBUG end AlertEngine_ExecuteAlert (SMTPP) 0- 1 [3888] SA DEBUG end of AlertEngine_DoAlert 0- 1 [3888] SA DEBUG end AlertEngines_DoAlerts 0- 1 [3888] SA DEBUG end of alerting engine 0- 1 [3888] SA DEBUG end entry_thr_check_post 0- 1 [3888] Message: 16503248420070713.SA602056-1, Failed to Send, error description: Interrupted., error code: 0x800a4f4e [3888] Try to resolve the host name [3888] The host name is an TCPIP address [3888] Try to resolve the host name 62.197.34.36 [3888] The host name 62.197.34.36 is an TCPIP address [3888] Try to resolve the host name [3888] The host name is NOT an TCPIP address [3888] The Host name: was resolved to: 192.168.39.180 [2704] Woah, nellie! -------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Saturday, 14 July 2007 12:21 AM To: Servers Alive Discussion List Subject: RE: [SA-list] HELP SMTP email doent work download http://beta.woodstone.nu/soft/temp/dbgviewe.exe (http://beta.woodstone.nu/soft/temp/dbgviewe.exe) and run that next to SA, within the dbgview window you'll get some extra logging on the SMTP sending. Dirk Bulinckx. -------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Punton Sent: Friday, July 13, 2007 4:11 PM To: Servers Alive Discussion List Subject: [SA-list] HELP SMTP email doent work Dear All & Anyone, I have not been able to receive smtp email (from the test window in setup) despite using exactly the same details in a little coldfusion script on the same server sends email fine. I have variously used the send direct toggle setting and also ping mail server off and on. Without luck. I am using the latest version of 6 . What else could I be doing wrong? Cheers in advance Daniel To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
