why did you run ./configure with the option "--with-blas=openblas" ?
Please try re-running ./configure without it. Then hopefully numpy etc will be built. On Sat, 6 Mar 2021, 09:55 'Hackenberg, Klaus' via sage-support, < sage-support@googlegroups.com> wrote: > High, > > running "make toolchain shows only > > [lsf@dlp762 sage-9.2]$ make toolchain > make build/make/Makefile --stop > make[1]: Entering directory > `/net/dlp762/share/application-software/Sage/sage-9.2' > make[1]: `build/make/Makefile' is up to date. > make[1]: Leaving directory > `/net/dlp762/share/application-software/Sage/sage-9.2' > build/bin/sage-logger \ > "cd build/make && ./install 'toolchain'" logs/install.log > make[1]: Entering directory > `/net/dlp762/share/application-software/Sage/sage-9.2/build/make' > make[1]: Leaving directory > `/net/dlp762/share/application-software/Sage/sage-9.2/build/make' > Nothing to (re)build / all up-to-date. > [lsf@dlp762 sage-9.2]$ > > I include the config log. > > Regards, Klaus Hackenberg > > -- > Klaus Hackenberg > IT-Systeme und Software-Integration > IT.SERVICES > Ruhr-Universität Bochum | 44780 Bochum > fon: +49 234 32 23485 > http://www.it-services.rub.de/ > > -----Ursprüngliche Nachricht----- > Von: sage-support@googlegroups.com <sage-support@googlegroups.com> Im > Auftrag von Dima Pasechnik > Gesendet: Samstag, 6. März 2021 01:08 > An: sage-support <sage-support@googlegroups.com>; Matthias Koeppe < > mkoe...@math.ucdavis.edu> > Betreff: Re: [sage-support] problem compiling sage 9.2 on RHEL 6 > > "Error building wheel for numpy" > > please post > /net/dlp762/share/application-software/Sage/sage-9.2/config.log > > could you also please try running > > make toolchain > > and then run make. > > > > Matthias, > is it another instance of not having .pc files ready for blas/lapack etc? > > Running from numpy source directory. > > /net/dlp762/share/application-software/Sage/sage-9.2/local/var/tmp/sage/build/numpy-1.19.1/src/numpy/distutils/system_info.py:1914: > UserWarning: > Optimized (vendor) Blas libraries are not found. > Falls back to netlib Blas library which has worse performance. > A better performance should be easily gained by switching > Blas library. > if self._calc_info(blas): > > /net/dlp762/share/application-software/Sage/sage-9.2/local/lib/python3.8/distutils/dist.py:274: > UserWarning: Unknown distribution option: 'define_macros' > warnings.warn(msg) > error: Command "gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv > -O3 -Wall -Wno-unused -fPIC -DNPY_INTERNAL_BUILD=1 > -DHAVE_NPY_CONFIG_H=1 -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1 > -D_LARGEFILE64_SOURCE=1 -DNO_ATLAS_INFO=1 -DHAVE_CBLAS > -I/net/dlp762/share/application-software/Sage/sage-9.2/local/include > -Ibuild/src.linux-x86_64-3.8/numpy/core/src/umath > -Ibuild/src.linux-x86_64-3.8/numpy/core/src/npymath > -Ibuild/src.linux-x86_64-3.8/numpy/core/src/common > -Inumpy/core/include > -Ibuild/src.linux-x86_64-3.8/numpy/core/include/numpy > -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core > -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath > -Inumpy/core/src/npysort > > -I/net/dlp762/share/application-software/Sage/sage-9.2/local/include/python3.8 > -Ibuild/src.linux-x86_64-3.8/numpy/core/src/common > -Ibuild/src.linux-x86_64-3.8/numpy/core/src/npymath -c > build/src.linux-x86_64-3.8/numpy/core/src/umath/loops.c -o > build/temp.linux-x86_64-3.8/build/src.linux-x86_64-3.8/numpy/core/src/umath/loops.o > -MMD -MF > build/temp.linux-x86_64-3.8/build/src.linux-x86_64-3.8/numpy/core/src/umath/loops.o.d > -std=c99" failed with exit status 1 > > ******************************************************************************** > Error building wheel for numpy > > ******************************************************************************** > > On Fri, Mar 5, 2021 at 5:37 PM 'Hackenberg, Klaus' via sage-support < > sage-support@googlegroups.com> wrote: > > > > High, > > > > > > > > I succeeded compiling r-3.6.3. > > > > > > > > But now next stop when compiling numpy-1.19.1. > > > > I include the error log. > > > > > > > > Regards, Klaus Hackenberg > > > > > > > > -- > > > > Klaus Hackenberg > > > > IT-Systeme und Software-Integration > > > > IT.SERVICES > > > > Ruhr-Universität Bochum | 44780 Bochum > > > > fon: +49 234 32 23485 > > > > http://www.it-services.rub.de/ > > > > > > > > Von: sage-support@googlegroups.com <sage-support@googlegroups.com> Im > > Auftrag von Dima Pasechnik > > Gesendet: Freitag, 5. März 2021 18:00 > > An: sage-support <sage-support@googlegroups.com> > > Betreff: Re: [sage-support] problem compiling sage 9.2 on RHEL 6 > > > > > > > > make xz > > > > > > > > followed by make > > > > > > > > On Fri, 5 Mar 2021, 16:58 'Hackenberg, Klaus' via sage-support, < > sage-support@googlegroups.com> wrote: > > > > High, > > > > > > > > „make bzip2“ helps further, but r-3.6.3 still does not compile. > > > > RHEL6 contains > > > > > > > > [root@dlp762 Sage]# rpm -qa --last|grep xz > > > > xz-devel-4.999.9-0.5.beta.20091007git.el6.x86_64 Tue Jun 18 11:06:45 > > 2019 > > > > xz-lzma-compat-4.999.9-0.5.beta.20091007git.el6.x86_64 Fri Sep 18 > > 09:39:37 2015 > > > > xz-4.999.9-0.5.beta.20091007git.el6.x86_64 Fri Sep 18 09:39:26 2015 > > > > xz-libs-4.999.9-0.5.beta.20091007git.el6.x86_64 Fri Sep 18 09:39:03 > > 2015 > > > > > > > > but 5.0.3 seems tob e necessary > > > > > > > > checking if lzma version >= 5.0.3... no > > > > configure: error: "liblzma library and headers are required" > > > > > > > > Is there a suitable version within sage? > > > > > > > > I include the error log. > > > > > > > > Regards, Klaus Hackenberg > > > > > > > > -- > > > > Klaus Hackenberg > > > > IT-Systeme und Software-Integration > > > > IT.SERVICES > > > > Ruhr-Universität Bochum | 44780 Bochum > > > > fon: +49 234 32 23485 > > > > http://www.it-services.rub.de/ > > > > > > > > Von: sage-support@googlegroups.com <sage-support@googlegroups.com> Im > > Auftrag von Dima Pasechnik > > Gesendet: Freitag, 5. März 2021 17:30 > > An: sage-support <sage-support@googlegroups.com> > > Betreff: Re: [sage-support] problem compiling sage 9.2 on RHEL 6 > > > > > > > > > > > > On Fri, 5 Mar 2021, 16:17 'Hackenberg, Klaus' via sage-support, < > sage-support@googlegroups.com> wrote: > > > > High, > > > > adding /usr/local/Gcc/lib64 to $LD_LIBRARY_PATH helps compiling > gfan-0.6.2.p1. > > > > Next problem is with r-3.6.3: > > The bzip2 from RHEL6 seem to be to old: > > > > [root@dlp762 Sage]# bzip2 --version > > bzip2, a block-sorting file compressor. Version 1.0.5, 10-Dec-2007. > > > > Is there any option to use another version (built within sage)? > > > > > > > > make bzip2 > > > > > > > > > > > > > > I include the error log. > > > > Regards, Klaus Hackenberg > > > > -- > > Klaus Hackenberg > > IT-Systeme und Software-Integration > > IT.SERVICES > > Ruhr-Universität Bochum | 44780 Bochum > > fon: +49 234 32 23485 > > http://www.it-services.rub.de/ > > > > > > -----Ursprüngliche Nachricht----- > > Von: sage-support@googlegroups.com <sage-support@googlegroups.com> Im > > Auftrag von Dima Pasechnik > > Gesendet: Freitag, 5. März 2021 15:58 > > An: sage-support <sage-support@googlegroups.com> > > Betreff: Re: [sage-support] problem compiling sage 9.2 on RHEL 6 > > > > On Fri, Mar 5, 2021 at 2:30 PM 'Hackenberg, Klaus' via sage-support < > sage-support@googlegroups.com> wrote: > > > > > > High, > > > > > > I find the following > > > > > > [lsf@dlp762 Sage]$ echo $PATH > > > /usr/local/Gcc/bin:/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/local/ > > > bi n:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin > > > [lsf@dlp762 Sage]$ > > > [lsf@dlp762 Sage]$ g++ -v > > > Using built-in specs. > > > COLLECT_GCC=g++ > > > COLLECT_LTO_WRAPPER=/net/dlp762/share/application-software/Gcc/bin/. > > > ./ libexec/gcc/x86_64-pc-linux-gnu/9.2.0/lto-wrapper > > > Target: x86_64-pc-linux-gnu > > > Configured with: ../gcc-9.2.0/configure --disable-multilib > > > --exec-prefix=/usr/local/Gcc --prefix=/usr/local/Gcc Thread model: > > > posix gcc version 9.2.0 (GCC) > > > [lsf@dlp762 Sage]$ > > > [lsf@dlp762 Sage]$ find /usr/local/Gcc/ -name libstdc++.so.6 > > > /usr/local/Gcc/lib64/libstdc++.so.6 > > > /usr/local/Gcc/gcc-build/stage1-x86_64-pc-linux-gnu/libstdc++-v3/src/. > > > libs/libstdc++.so.6 > > > /usr/local/Gcc/gcc-build/x86_64-pc-linux-gnu/libstdc++-v3/src/.libs/ > > > li > > > bstdc++.so.6 > > > /usr/local/Gcc/gcc-build/prev-x86_64-pc-linux-gnu/libstdc++-v3/src/. > > > li > > > bs/libstdc++.so.6 > > > [lsf@dlp762 Sage]$ > > > > try > > > > export LD_LIBRARY_PATH=/usr/local/Gcc/lib64:$LD_LIBRARY_PATH > > > > and then run make > > > > > > > > > > > > > > Regards, Klaus Hackenberg > > > > > > -- > > > Klaus Hackenberg > > > IT-Systeme und Software-Integration > > > IT.SERVICES > > > Ruhr-Universität Bochum | 44780 Bochum > > > fon: +49 234 32 23485 > > > http://www.it-services.rub.de/ > > > > > > > > > -----Ursprüngliche Nachricht----- > > > Von: sage-support@googlegroups.com <sage-support@googlegroups.com> > > > Im Auftrag von Dima Pasechnik > > > Gesendet: Freitag, 5. März 2021 15:08 > > > An: sage-support <sage-support@googlegroups.com> > > > Betreff: Re: [sage-support] problem compiling sage 9.2 on RHEL 6 > > > > > > On Fri, Mar 5, 2021 at 12:55 PM 'Hackenberg, Klaus' via sage-support < > sage-support@googlegroups.com> wrote: > > > > > > > > High, > > > > > > > > when using "./configure --with-mp=gmp" things look much better. > > > > > > > > But now I get an error for gfan-0.6.2.p1. > > > > I include the error log. > > > it says > > > > > > ./gfan: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not > > > found (required by ./gfan) > > > ./gfan: /usr/lib64/libstdc++.so.6: version `CXXABI_1.3.8' not found > > > (required by ./gfan) > > > ./gfan: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.26' not > > > found (required by ./gfan) > > > ./gfan: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not > > > found (required by ./gfan) > > > ./gfan: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.22' not > > > found (required by ./gfan) > > > ./gfan: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.15' not > > > found (required by ./gfan) > > > > > > Something is not quite right with your C++ toolchain. As your > > > gcc/g++ data says --prefix=/usr/local/Gcc one would expect > > > libstdc++.so.6 to be in /usr/local/Gcc, and not in /usr/lib64/ > > > (where you probably have old RHEL 6 gcc/g++ things) > > > > > > No idea what exactly. What is the output of > > > > > > g++ -v > > > > > > Do you have libstdc++.so.6 in /usr/local/ at all? > > > > > > > > > > > > > > > > > Regards, Klaus Hackenberg > > > > > > > > -- > > > > Klaus Hackenberg > > > > IT-Systeme und Software-Integration IT.SERVICES Ruhr-Universität > > > > Bochum | 44780 Bochum > > > > fon: +49 234 32 23485 > > > > http://www.it-services.rub.de/ > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > Von: sage-support@googlegroups.com <sage-support@googlegroups.com> > > > > Im Auftrag von Dima Pasechnik > > > > Gesendet: Freitag, 5. März 2021 12:45 > > > > An: sage-support <sage-support@googlegroups.com> > > > > Betreff: Re: [sage-support] problem compiling sage 9.2 on RHEL 6 > > > > > > > > On Fri, Mar 5, 2021 at 11:24 AM 'Hackenberg, Klaus' via sage-support > <sage-support@googlegroups.com> wrote: > > > > > > > > > > High, > > > > > > > > > > I did the following > > > > > > > > > > [lsf@dlp762 Sage]$ cd sage-9.2 > > > > > [lsf@dlp762 sage-9.2]$ ./configure --with-gmp=gmp > > > > > > /tmp/configure.log 2>&1 > > > > > > > > and so you once again mixed up --with-gmp= and --with-mp= > > > > > > > > It should be --with-mp=gmp > > > > > > > > > > > > > [lsf@dlp762 sage-9.2]$ make mpir-clean > /tmp/mpir.clean.log > > > > > 2>&1 > > > > > > > > > > and include the logs. > > > > > > > > > > Regards, Klaus Hackenberg > > > > > > > > > > -- > > > > > Klaus Hackenberg > > > > > IT-Systeme und Software-Integration IT.SERVICES Ruhr-Universität > > > > > Bochum | 44780 Bochum > > > > > fon: +49 234 32 23485 > > > > > http://www.it-services.rub.de/ > > > > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > Von: sage-support@googlegroups.com > > > > > <sage-support@googlegroups.com> Im Auftrag von Dima Pasechnik > > > > > Gesendet: Freitag, 5. März 2021 11:31 > > > > > An: sage-support <sage-support@googlegroups.com> > > > > > Betreff: Re: [sage-support] problem compiling sage 9.2 on RHEL 6 > > > > > > > > > > On Fri, Mar 5, 2021 at 10:02 AM 'Hackenberg, Klaus' via > sage-support <sage-support@googlegroups.com> wrote: > > > > > > > > > > > > High, > > > > > > > > > > > > I installed python 3.9.2 in /usr/local/Python and added it > > > > > > to PATH variable > > > > > > > > > > > > [lsf@dlp762 root]$ echo $PATH > > > > > > /usr/local/Python/bin:/usr/lib64/qt-3.3/bin:/usr/local/sbin:/u > > > > > > sr /l oc al /bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin > > > > > > [lsf@dlp762 root]$ python --version Python 3.9.2 > > > > > > > > > > > > Now symmetrica-3.0.1. compiles successfull. > > > > > > But ppl-1.2 no longer compiles !!! > > > > > > So I seem to be in a deadlock . > > > > > > > > > > > It's the same misconfiguration of mp/gmp stuff as before. > > > > > Without knowning what exactly you did after changing PATH, it's > hard to tell. > > > > > > > > > > please post the top level config.log (the one in the same > > > > > directory as the main ./configure script) > > > > > - the ppl problems come from the top level misconfiguration. > > > > > > > > > > > > > > > > > > > > > I include ppl error logs. > > > > > > > > > > > > Regards, Klaus Hackenberg > > > > > > > > > > > > -- > > > > > > Klaus Hackenberg > > > > > > IT-Systeme und Software-Integration IT.SERVICES > > > > > > Ruhr-Universität Bochum | 44780 Bochum > > > > > > fon: +49 234 32 23485 > > > > > > http://www.it-services.rub.de/ > > > > > > > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > > Von: sage-support@googlegroups.com > > > > > > <sage-support@googlegroups.com> Im Auftrag von Dima Pasechnik > > > > > > Gesendet: Donnerstag, 4. März 2021 18:53 > > > > > > An: sage-support <sage-support@googlegroups.com> > > > > > > Betreff: Re: [sage-support] problem compiling sage 9.2 on RHEL > > > > > > 6 > > > > > > > > > > > > On Thu, Mar 4, 2021 at 5:08 PM 'Hackenberg, Klaus' via > sage-support <sage-support@googlegroups.com> wrote: > > > > > > > > > > > > > > High, > > > > > > > > > > > > > > > > > > > > > > > > > > > > on my RHEL6 server I see > > > > > > > > > > > > > > > > > > > > > > > > > > > > [root@dlp762 Sage]# python --version > > > > > > > > > > > > > > Python 2.6.6 > > > > > > > > > > > > > > > > > > > > > > > > > > > > But the server has installed xz packages > > > > > > > > > > > > > > > > > > > > > > > > > > > > [root@dlp762 Sage]# rpm -qa --last|grep xz > > > > > > > > > > > > > > xz-devel-4.999.9-0.5.beta.20091007git.el6.x86_64 Tue Jun 18 > > > > > > > 11:06:45 > > > > > > > 2019 > > > > > > > > > > > > > > xz-lzma-compat-4.999.9-0.5.beta.20091007git.el6.x86_64 Fri > > > > > > > Sep > > > > > > > 18 > > > > > > > 09:39:37 2015 > > > > > > > > > > > > > > xz-4.999.9-0.5.beta.20091007git.el6.x86_64 Fri Sep 18 > 09:39:26 2015 > > > > > > > > > > > > > > xz-libs-4.999.9-0.5.beta.20091007git.el6.x86_64 Fri Sep 18 > > > > > > > 09:39:03 > > > > > > > 2015 > > > > > > > > > > > > > > > > > > > > > > > > > > > > Is it possible to use the buildin xz ? > > > > > > > > > > > > Do you have xz application installed and accepted by Sage (it > > > > > > should be visible in config.log)? If so, something is breaking > > > > > > in > > > > > > https://github.com/sagemath/sage/blob/master/build/sage_bootst > > > > > > ra > > > > > > p/ > > > > > > un > > > > > > co > > > > > > mpress/tar_file.py#L161 > > > > > > > > > > > > Mind you, python 2.6.6 has been released about 12 years ago, > > > > > > not sure this code, from 2016, was ever tested on 2.6.6 > > > > > > (perhaps on less buggy > > > > > > 2.6.7...) > > > > > > > > > > > > You may try installing pyenv with newer python and run Sage > > > > > > installation from there. See > > > > > > https://gist.github.com/ysaotome/7956676 > > > > > > (you ought to replace 2.7.6 with 3.9.1 there, to escape the > > > > > > Python2 hell completely) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Regards, Klaus Hackenberg > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > Klaus Hackenberg > > > > > > > > > > > > > > IT-Systeme und Software-Integration > > > > > > > > > > > > > > IT.SERVICES > > > > > > > > > > > > > > Ruhr-Universität Bochum | 44780 Bochum > > > > > > > > > > > > > > fon: +49 234 32 23485 > > > > > > > > > > > > > > http://www.it-services.rub.de/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > Von: sage-support@googlegroups.com > > > > > > > <sage-support@googlegroups.com> Im Auftrag von Dima > > > > > > > Pasechnik > > > > > > > Gesendet: Donnerstag, 4. März 2021 17:18 > > > > > > > An: sage-support <sage-support@googlegroups.com> > > > > > > > Betreff: Re: [sage-support] problem compiling sage 9.2 on > > > > > > > RHEL > > > > > > > 6 > > > > > > > > > > > > > > > > > > > > > > > > > > > > your system python cannot uncompress .xz files... :( > > > > > > > > > > > > > > > > > > > > > > > > > > > > how old is it? > > > > > > > > > > > > > > > > > > > > > > > > > > > > can you install systemwide python2 to be python 2.7? > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, 4 Mar 2021, 16:04 'Hackenberg, Klaus' via > sage-support, <sage-support@googlegroups.com> wrote: > > > > > > > > > > > > > > High, > > > > > > > > > > > > > > I startet in a fresh directory sage-9.2 (from > sage-9.2.tag.gz) > > > > > > > using the command " make mpir-clean" and got > > > > > > > > > > > > > > ============================================================ > > > > > > > == > > > > > > > == > > > > > > > == > > > > > > > == > > > > > > > == > > > > > > > === > > > > > > > [lsf@dlp762 sage-9.2]$ make mpir-clean make > > > > > > > build/make/Makefile --stop > > > > > > > make[1]: Entering directory > `/net/dlp762/share/application-software/Sage/sage-9.2' > > > > > > > rm -f config.log > > > > > > > mkdir -p logs/pkgs > > > > > > > ln -s logs/pkgs/config.log config.log > > > > > > > ************************************************************ > > > > > > > ** > > > > > > > ** > > > > > > > ** > > > > > > > ** > > > > > > > ** > > > > > > > ****** > > > > > > > error: Sage source tree is unconfigured. Please run > "./configure" first. > > > > > > > note: Type "./configure --help" to see the available > configuration options. > > > > > > > ************************************************************ > > > > > > > ** > > > > > > > ** > > > > > > > ** > > > > > > > ** > > > > > > > ** > > > > > > > ****** > > > > > > > make[1]: *** [build/make/Makefile] Error 1 > > > > > > > make[1]: Leaving directory > `/net/dlp762/share/application-software/Sage/sage-9.2' > > > > > > > make: *** [mpir-clean] Error 2 > > > > > > > [lsf@dlp762 sage-9.2]$ > > > > > > > ============================================================ > > > > > > > == > > > > > > > == > > > > > > > == > > > > > > > == > > > > > > > == > > > > > > > === > > > > > > > > > > > > > > I then used > > > > > > > > > > > > > > ./configure --with-mp=gmp > > > > > > > make mpir-clean > > > > > > > make -j4 > > > > > > > > > > > > > > and ppl-1.2 compiled ! > > > > > > > > > > > > > > But now I get a new error with symmetrica-3.0.1. > > > > > > > I attach the error log file > > > > > > > > > > > > > > Regards, Klaus Hackenberg > > > > > > > > > > > > > > -- > > > > > > > Klaus Hackenberg > > > > > > > IT-Systeme und Software-Integration IT.SERVICES > > > > > > > Ruhr-Universität Bochum | 44780 Bochum > > > > > > > fon: +49 234 32 23485 > > > > > > > http://www.it-services.rub.de/ > > > > > > > > > > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > > > Von: sage-support@googlegroups.com > > > > > > > <sage-support@googlegroups.com> Im Auftrag von Dima > > > > > > > Pasechnik > > > > > > > Gesendet: Donnerstag, 4. März 2021 15:57 > > > > > > > An: sage-support <sage-support@googlegroups.com> > > > > > > > Betreff: Re: [sage-support] problem compiling sage 9.2 on > > > > > > > RHEL > > > > > > > 6 > > > > > > > > > > > > > > Please post the top-level config.log, then we'll see more > details about GMP. > > > > > > > > > > > > > > In Sage 9.2, if you do ./configure without arguments, Sage is > building a GMP-compatible MPIR, not "real" GMP. > > > > > > > (Perhaps MPIR is broken now beyond repair, and shoud not be > > > > > > > used on RHEL 6,I don't know) We're changing with in the > > > > > > > coming 9.3, see > > > > > > > https://trac.sagemath.org/ticket/30752 > > > > > > > Meanwhile please do > > > > > > > > > > > > > > make mpir-clean > > > > > > > ./configure --with-mp=gmp > > > > > > > make -j4 > > > > > > > > > > > > > > > > > > > > > On Thu, Mar 4, 2021 at 2:06 PM 'Hackenberg, Klaus' via > sage-support <sage-support@googlegroups.com> wrote: > > > > > > > > > > > > > > > > High, > > > > > > > > > > > > > > > > I startet in a fresh directory sage-9.2 (from > sage-9.2.tag.gz) > > > > > > > > using the commands > > > > > > > > > > > > > > > > ./configure > > > > > > > > make -j4 > > > > > > > > > > > > > > > > and ran into the same error. > > > > > > > > > > > > > > > > gmp binaries are build automatically > > > > > > > > > > > > > > > > ls -lrt sage-9.2/local/lib/*gmp* -rwxr-xr-x 1 lsf lsf > > > > > > > > 3342817 Mar 4 12:35 sage-9.2/local/lib/libgmp.so.23.0.3 > > > > > > > > lrwxrwxrwx 1 lsf lsf 16 Mar 4 12:35 > sage-9.2/local/lib/libgmp.so.23 -> libgmp.so.23.0.3 > > > > > > > > lrwxrwxrwx 1 lsf lsf 16 Mar 4 12:35 > sage-9.2/local/lib/libgmp.so -> libgmp.so.23.0.3 > > > > > > > > -rwxr-xr-x 1 lsf lsf 318950 Mar 4 12:36 > sage-9.2/local/lib/libgmpxx.so.8.4.3 > > > > > > > > lrwxrwxrwx 1 lsf lsf 17 Mar 4 12:36 > sage-9.2/local/lib/libgmpxx.so.8 -> libgmpxx.so.8.4.3 > > > > > > > > lrwxrwxrwx 1 lsf lsf 17 Mar 4 12:36 > sage-9.2/local/lib/libgmpxx.so -> libgmpxx.so.8.4.3 > > > > > > > > -rw-r--r-- 1 lsf lsf 6804714 Mar 4 12:36 > > > > > > > > sage-9.2/local/lib/libgmp.a > > > > > > > > -rw-r--r-- 1 lsf lsf 796188 Mar 4 12:36 > > > > > > > > sage-9.2/local/lib/libgmpxx.a -rwxr-xr-x 1 lsf lsf 955210 > Mar 4 12:43 sage-9.2/local/lib/libcddgmp.so.0.0.0 > > > > > > > > lrwxrwxrwx 1 lsf lsf 18 Mar 4 12:43 > sage-9.2/local/lib/libcddgmp.so.0 -> libcddgmp.so.0.0.0 > > > > > > > > lrwxrwxrwx 1 lsf lsf 18 Mar 4 12:43 > sage-9.2/local/lib/libcddgmp.so -> libcddgmp.so.0.0.0 > > > > > > > > -rw-r--r-- 1 lsf lsf 1532644 Mar 4 12:43 > > > > > > > > sage-9.2/local/lib/libcddgmp.a > > > > > > > > > > > > > > > > I attach the error log file. > > > > > > > > > > > > > > > > Regards, Klaus Hackenberg > > > > > > > > > > > > > > > > -- > > > > > > > > Klaus Hackenberg > > > > > > > > IT-Systeme und Software-Integration IT.SERVICES > > > > > > > > Ruhr-Universität Bochum | 44780 Bochum > > > > > > > > fon: +49 234 32 23485 > > > > > > > > http://www.it-services.rub.de/ > > > > > > > > > > > > > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > > > > Von: sage-support@googlegroups.com > > > > > > > > <sage-support@googlegroups.com> Im Auftrag von Dima > > > > > > > > Pasechnik > > > > > > > > Gesendet: Mittwoch, 3. März 2021 18:28 > > > > > > > > An: sage-support <sage-support@googlegroups.com> > > > > > > > > Betreff: Re: [sage-support] problem compiling sage 9.2 on > > > > > > > > RHEL > > > > > > > > 6 > > > > > > > > > > > > > > > > On Wed, Mar 3, 2021 at 5:15 PM 'Klaus Hackenberg' via > sage-support <sage-support@googlegroups.com> wrote: > > > > > > > > > > > > > > > > > > High, > > > > > > > > > I tried to compile sage 9.2 on a server running RHEL 6. > > > > > > > > > I use gcc 9.2.0 to compile and the following commands > > > > > > > > > > > > > > > > > > ./configure --with-gmp=gmp > > > > > > > > might be in error. > > > > > > > > > > > > > > > > What did you mean to achieve by '--with-gmp=gmp' ? By > default Sage will look for a systemwide GMP installation and try to use it > (else it will build its own) But Sage needs GMP version 6.1, at least. Most > probably what you have on the 10-years old RHEL 6 is still GMP version 4, > so it won't fly. > > > > > > > > > > > > > > > > You probably want to force building GMP rather than much > iffier MPIR, so you'd probably need '--with-mp=gmp' in this case. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > make -j4 > > > > > > > > > > > > > > > > > > ppl-1.2 fails to compile whith the attached error log file. > > > > > > > > > Do you have any idea what's going wrong and how to fix it? > > > > > > > > > Regards, Klaus Hackenberg > > > > > > > > > > > > > > > > > > -- > > > > > > > > > You received this message because you are subscribed to > the Google Groups "sage-support" group. > > > > > > > > > To unsubscribe from this group and stop receiving emails > from it, send an email to sage-support+unsubscr...@googlegroups.com. > > > > > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/e1713003-dbe6-475b-9ffd-214d005cfec5n%40googlegroups.com > . > > > > > > > > > > > > > > > > -- > > > > > > > > You received this message because you are subscribed to a > topic in the Google Groups "sage-support" group. > > > > > > > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > > > > > > > > To unsubscribe from this group and all its topics, send an > email to sage-support+unsubscr...@googlegroups.com. > > > > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq0i67G3DRu4oeLSTegkFw0Dr-FtFVHnpQShXze%3DSi7h5g%40mail.gmail.com > . > > > > > > > > > > > > > > > > -- > > > > > > > > You received this message because you are subscribed to the > Google Groups "sage-support" group. > > > > > > > > To unsubscribe from this group and stop receiving emails > from it, send an email to sage-support+unsubscr...@googlegroups.com. > > > > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/e501b240a4bc4e2f96d0440c10d06199%40ruhr-uni-bochum.de > . > > > > > > > > > > > > > > -- > > > > > > > You received this message because you are subscribed to a > topic in the Google Groups "sage-support" group. > > > > > > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > > > > > > > To unsubscribe from this group and all its topics, send an > email to sage-support+unsubscr...@googlegroups.com. > > > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq3663awZ35af7%3D2ROLRkWF_%2B8w7dM41BCk9c2jGU7kAoQ%40mail.gmail.com > . > > > > > > > > > > > > > > -- > > > > > > > You received this message because you are subscribed to the > Google Groups "sage-support" group. > > > > > > > To unsubscribe from this group and stop receiving emails from > it, send an email to sage-support+unsubscr...@googlegroups.com. > > > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/4ba35e8446944d7da54e579a9f537235%40ruhr-uni-bochum.de > . > > > > > > > > > > > > > > -- > > > > > > > You received this message because you are subscribed to a > topic in the Google Groups "sage-support" group. > > > > > > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > > > > > > > To unsubscribe from this group and all its topics, send an > email to sage-support+unsubscr...@googlegroups.com. > > > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq285Gv%2BubRdTUobCbR%3DEfdfwYzLthmaeUymhq-hpufDBQ%40mail.gmail.com > . > > > > > > > > > > > > > > -- > > > > > > > You received this message because you are subscribed to the > Google Groups "sage-support" group. > > > > > > > To unsubscribe from this group and stop receiving emails from > it, send an email to sage-support+unsubscr...@googlegroups.com. > > > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/f9988b1b364447a883f1679f65752daf%40ruhr-uni-bochum.de > . > > > > > > > > > > > > -- > > > > > > You received this message because you are subscribed to a topic > in the Google Groups "sage-support" group. > > > > > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > > > > > > To unsubscribe from this group and all its topics, send an email > to sage-support+unsubscr...@googlegroups.com. > > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq2fRF5Ybh_3S33r7PWRDSAxXeEey6dzWBKKxJAsKZf%3Dgw%40mail.gmail.com > . > > > > > > > > > > > > -- > > > > > > You received this message because you are subscribed to the > Google Groups "sage-support" group. > > > > > > To unsubscribe from this group and stop receiving emails from > it, send an email to sage-support+unsubscr...@googlegroups.com. > > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/54a874a0bf42431ea3db426b29b68676%40ruhr-uni-bochum.de > . > > > > > > > > > > -- > > > > > You received this message because you are subscribed to a topic in > the Google Groups "sage-support" group. > > > > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > > > > > To unsubscribe from this group and all its topics, send an email > to sage-support+unsubscr...@googlegroups.com. > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq2QRO4u8j%2BHQEigifeisNMe2vpm74GvfK48YFih7K59pw%40mail.gmail.com > . > > > > > > > > > > -- > > > > > You received this message because you are subscribed to the Google > Groups "sage-support" group. > > > > > To unsubscribe from this group and stop receiving emails from it, > send an email to sage-support+unsubscr...@googlegroups.com. > > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/d24735ac92e14e8abdc137ea8b99538d%40ruhr-uni-bochum.de > . > > > > > > > > -- > > > > You received this message because you are subscribed to a topic in > the Google Groups "sage-support" group. > > > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > > > > To unsubscribe from this group and all its topics, send an email to > sage-support+unsubscr...@googlegroups.com. > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq1EwxC7Uk_VenFViiQJG56fVSZAgRqGWMXve7cwoKnUxQ%40mail.gmail.com > . > > > > > > > > -- > > > > You received this message because you are subscribed to the Google > Groups "sage-support" group. > > > > To unsubscribe from this group and stop receiving emails from it, > send an email to sage-support+unsubscr...@googlegroups.com. > > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/a61197ac5bbb42879976b6a7d0b36043%40ruhr-uni-bochum.de > . > > > > > > -- > > > You received this message because you are subscribed to a topic in the > Google Groups "sage-support" group. > > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > > > To unsubscribe from this group and all its topics, send an email to > sage-support+unsubscr...@googlegroups.com. > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq0af9NOUvZSaqvD-%2BBcjjHz2uEE%2BYqK7TmtznxB88u%3DAg%40mail.gmail.com > . > > > > > > -- > > > You received this message because you are subscribed to the Google > Groups "sage-support" group. > > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-support+unsubscr...@googlegroups.com. > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/5e0ec7b0d1854d53b32165745770e8c6%40ruhr-uni-bochum.de > . > > > > -- > > You received this message because you are subscribed to a topic in the > Google Groups "sage-support" group. > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > > To unsubscribe from this group and all its topics, send an email to > sage-support+unsubscr...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq3MEeHBH8XBCgn3MnfY4OVr8tOj57XmCukKnnQg65n85Q%40mail.gmail.com > . > > > > -- > > You received this message because you are subscribed to the Google > Groups "sage-support" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-support+unsubscr...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/0398e5877d974f308f55b3b41920bb7b%40ruhr-uni-bochum.de > . > > > > -- > > You received this message because you are subscribed to a topic in the > Google Groups "sage-support" group. > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > > To unsubscribe from this group and all its topics, send an email to > sage-support+unsubscr...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq0wJii%2Bfjrea%2BWE7qDV_UPrN-PkoxTz%2BF_F5nK3h915Vg%40mail.gmail.com > . > > > > -- > > You received this message because you are subscribed to the Google > Groups "sage-support" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-support+unsubscr...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/f29d490cefca43858ab9ecb180ec5130%40ruhr-uni-bochum.de > . > > > > -- > > You received this message because you are subscribed to a topic in the > Google Groups "sage-support" group. > > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > > To unsubscribe from this group and all its topics, send an email to > sage-support+unsubscr...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq2J2ZiJE33Hf9VG%3DP-uyf-M435WmP%3Da_66wRn%2B8i08tPA%40mail.gmail.com > . > > > > -- > > You received this message because you are subscribed to the Google > Groups "sage-support" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-support+unsubscr...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/8fbc9b7c91c242af9a1f593642632c76%40ruhr-uni-bochum.de > . > > -- > You received this message because you are subscribed to a topic in the > Google Groups "sage-support" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-support/GniJKQ0MaMY/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > sage-support+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/CAAWYfq2y2G0kdcGTO5GCnc8%2BRLarfzzk400CoLcuQLkKF5AXZQ%40mail.gmail.com > . > > -- > You received this message because you are subscribed to the Google Groups > "sage-support" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to sage-support+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/1c4c44c80ff240cdbb9f67a6e6a27b19%40ruhr-uni-bochum.de > . > -- You received this message because you are subscribed to the Google Groups "sage-support" group. To unsubscribe from this group and stop receiving emails from it, send an email to sage-support+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/sage-support/CAAWYfq35fd8wczpZoQpH-B%3DP_CGj-6ymEVNQ6%2B%3DO%3DHYoA7C1Pw%40mail.gmail.com.
