I did get a warning about that and added it to my PATH before running the
command, but I still got the result. I did what you suggested and still got
the same error message.
On Thursday, February 8, 2024 at 12:27:29 PM UTC-6 Matthias Koeppe wrote:
> That's great progress.
>
> Did pip issue any warnings when you installed sage_conf?
> In particular, it may have warned that the installation location for
> scripts is not in your PATH.
> If so, you can fix it as follows:
>
> export PATH="$(python3 -c 'import sysconfig;
> print(sysconfig.get_path("scripts", "posix_user"))'):$PATH"
>
> On Thursday, February 8, 2024 at 8:38:27 AM UTC-8 Sai Chandhrasekhar wrote:
>
>> I was able to install sage_conf successfully, but when I run, "python3 -m
>> pip install $(sage-config SAGE_SPKG_WHEELS)/*.whl sage_setup", I get the
>> following error messages:
>>
>> zsh: command not found: sage-config
>>
>> zsh: no matches found: /*.whl
>>
>> On Wednesday, February 7, 2024 at 3:13:27 PM UTC-6 Matthias Koeppe wrote:
>>
>>> To start from scratch in this mode of installation, you will need to
>>> remove the directory "/Users/user/.sage/sage-10.3.beta7-Darwin-x86_64/"
>>>
>>> On Wednesday, February 7, 2024 at 12:10:21 PM UTC-8 Sai Chandhrasekhar
>>> wrote:
>>>
>>>> I am still getting the same error. In the config.log files, I see this:
>>>> x86_64-apple-darwin13.4.0-clang: command not found. I have tried
>>>> uninstalling and reinstalling Xcode and the Xcode command line tools, but
>>>> I
>>>> still get the same result.
>>>>
>>>>
>>>> On Wednesday, February 7, 2024 at 11:06:12 AM UTC-6 Matthias Koeppe
>>>> wrote:
>>>>
>>>>> Thanks for sharing these logs.
>>>>> The key failure is here:
>>>>>
>>>>> configure:3938: x86_64-apple-darwin13.4.0-clang -march=core2
>>>>> -mtune=haswell -mssse3 -ftree-vectorize -fPIC -fstack-protector-strong
>>>>> -O2
>>>>> -pipe -isystem /Users/user/anaconda3/include -D_FORTIFY_SOURCE=2 -isystem
>>>>> /Users/user/anaconda3/include
>>>>> -L/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
>>>>> -Wl,-ld_classic,-rpath,/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
>>>>>
>>>>> -L/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
>>>>> -Wl,-ld_classic,-rpath,/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
>>>>>
>>>>> -Wl,-headerpad_max_install_names -Wl,-dead_strip_dylibs
>>>>> -Wl,-rpath,/Users/user/anaconda3/lib -L/Users/user/anaconda3/lib
>>>>> conftest.c
>>>>> >&5
>>>>> ld: library not found for -ld_classic
>>>>> clang-16: error: linker command failed with exit code 1 (use -v to see
>>>>> invocation)
>>>>>
>>>>> What's happening here is that a workaround that we use on macOS for
>>>>> compilation with XCode is incompatible with the conda toolchain.
>>>>> I have a fix for this in https://github.com/sagemath/sage/pull/37237
>>>>>
>>>>> For now, if you want to use the installation method using "pip install
>>>>> sage_conf", deactivate conda first.
>>>>> Or alternatively if you want to use conda, use one of the installation
>>>>> methods described in
>>>>> https://doc.sagemath.org/html/en/installation/conda.html
>>>>>
>>>>>
>>>>> On Tuesday, February 6, 2024 at 4:10:53 PM UTC-8 Sai Chandhrasekhar
>>>>> wrote:
>>>>>
>>>>>> I also tried to run the install command again with the --pre flag and
>>>>>> got the same result.
>>>>>>
>>>>>> On Tuesday, February 6, 2024 at 5:54:11 PM UTC-6 Sai Chandhrasekhar
>>>>>> wrote:
>>>>>>
>>>>>>> On Tuesday, February 6, 2024 at 5:14:56 PM UTC-6 Matthias Koeppe
>>>>>>> wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> and
>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src/config.log
>>>>>>>>
>>>>>>>> please
>>>>>>>>
>>>>>>>> On Tuesday, February 6, 2024 at 2:36:21 PM UTC-8 Sai Chandhrasekhar
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> On Tuesday, February 6, 2024 at 4:22:59 PM UTC-6 Matthias Koeppe
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Could you post one of these log files please? For example
>>>>>>>>>> info-6.8.log
>>>>>>>>>>
>>>>>>>>>> And could you try "python3 -m pip install --pre sage_conf" also?
>>>>>>>>>>
>>>>>>>>>> On Tuesday, February 6, 2024 at 12:15:08 PM UTC-8 Sai
>>>>>>>>>> Chandhrasekhar wrote:
>>>>>>>>>>
>>>>>>>>>>> When I ran python3 -m pip install sage_conf I got this error
>>>>>>>>>>> message:
>>>>>>>>>>>
>>>>>>>>>>> Error building Sage.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> The following package(s) may have failed to build (not
>>>>>>>>>>> necessarily
>>>>>>>>>>>
>>>>>>>>>>> during this run of 'make all-build'):
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> * package: gf2x-1.3.0
>>>>>>>>>>>
>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>
>>>>>>>>>>> log file:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/gf2x-1.3.0.log
>>>>>>>>>>>
>>>>>>>>>>> build directory:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/gf2x-1.3.0
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> * package: cddlib-0.94m
>>>>>>>>>>>
>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>
>>>>>>>>>>> log file:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/cddlib-0.94m.log
>>>>>>>>>>>
>>>>>>>>>>> build directory:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/cddlib-0.94m
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> * package: cliquer-1.22
>>>>>>>>>>>
>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>
>>>>>>>>>>> log file:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/cliquer-1.22.log
>>>>>>>>>>>
>>>>>>>>>>> build directory:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/cliquer-1.22
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> * package: libatomic_ops-7.8.0
>>>>>>>>>>>
>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>
>>>>>>>>>>> log file:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/libatomic_ops-7.8.0.log
>>>>>>>>>>>
>>>>>>>>>>> build directory:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> * package: m4ri-20200115
>>>>>>>>>>>
>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>
>>>>>>>>>>> log file:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/m4ri-20200115.log
>>>>>>>>>>>
>>>>>>>>>>> build directory:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/m4ri-20200115
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> * package: ecm-7.0.5
>>>>>>>>>>>
>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>
>>>>>>>>>>> log file:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/ecm-7.0.5.log
>>>>>>>>>>>
>>>>>>>>>>> build directory:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/ecm-7.0.5
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> * package: info-6.8
>>>>>>>>>>>
>>>>>>>>>>> last build time: Feb 6 14:07
>>>>>>>>>>>
>>>>>>>>>>> log file:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/info-6.8.log
>>>>>>>>>>>
>>>>>>>>>>> build directory:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/info-6.8
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> * package: pari-2.15.4
>>>>>>>>>>>
>>>>>>>>>>> last build time: Feb 6 14:08
>>>>>>>>>>>
>>>>>>>>>>> log file:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/pari-2.15.4.log
>>>>>>>>>>>
>>>>>>>>>>> build directory:
>>>>>>>>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/pari-2.15.4
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> For those packages the following error message was printed
>>>>>>>>>>> earlier:
>>>>>>>>>>>
>>>>>>>>>>> configure: error: C compiler cannot create executables
>>>>>>>>>>>
>>>>>>>>>>> On Tuesday, February 6, 2024 at 2:01:03 PM UTC-6 Matthias Koeppe
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> According to your config.log, the run of "configure" succeeded.
>>>>>>>>>>>> That config.log contains error messages from various compiler
>>>>>>>>>>>> invocations is a normal part of the configure process.
>>>>>>>>>>>>
>>>>>>>>>>>> What is the actual problem that you encountered?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Monday, February 5, 2024 at 2:58:36 PM UTC-8 Sai
>>>>>>>>>>>> Chandhrasekhar wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> On Monday, February 5, 2024 at 4:48:08 PM UTC-6 Dima Pasechnik
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 5 February 2024 21:58:54 GMT, "dan...@gmail.com" <
>>>>>>>>>>>>>> dan...@gmail.com> wrote:
>>>>>>>>>>>>>> >You could just use Sage_macOS
>>>>>>>>>>>>>> ><
>>>>>>>>>>>>>> https://github.com/3-manifolds/Sage_macOS/releases/tag/v2.2.0>,
>>>>>>>>>>>>>> quick and
>>>>>>>>>>>>>> >easy!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> for Sage development, you need a source install.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> >On Monday, February 5, 2024 at 3:49:02 PM UTC-6 Matthias
>>>>>>>>>>>>>> Koeppe wrote:
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> >> We would need to see the full logs
>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>> >> On Monday, February 5, 2024 at 1:26:31 PM UTC-8 Sai
>>>>>>>>>>>>>> Chandhrasekhar wrote:
>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>> >>> Hello,
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>> When I tried to run python3 -m pip install sage_conf, I
>>>>>>>>>>>>>> got this error
>>>>>>>>>>>>>> >>> message from config.log. I tried to change to GCC but
>>>>>>>>>>>>>> then I got a message
>>>>>>>>>>>>>> >>> that Sage cannot be built on macOS with GNU's gcc. Any
>>>>>>>>>>>>>> suggestions on what
>>>>>>>>>>>>>> >>> to do would be appreciated.
>>>>>>>>>>>>>> >>> configure:6595: x86_64-apple-darwin13.4.0-clang -V >&5
>>>>>>>>>>>>>> >>> clang-16: error: argument to '-V' is missing (expected 1
>>>>>>>>>>>>>> value)
>>>>>>>>>>>>>> >>> clang-16: error: no input files
>>>>>>>>>>>>>> >>> configure:6606: $? = 1
>>>>>>>>>>>>>> >>> configure:6595: x86_64-apple-darwin13.4.0-clang -qversion
>>>>>>>>>>>>>> >&5
>>>>>>>>>>>>>> >>> clang-16: error: unknown argument '-qversion'; did you
>>>>>>>>>>>>>> mean '--version'?
>>>>>>>>>>>>>> >>> clang-16: error: no input files
>>>>>>>>>>>>>> >>> configure:6606: $? = 1
>>>>>>>>>>>>>> >>> configure:6595: x86_64-apple-darwin13.4.0-clang -version
>>>>>>>>>>>>>> >&5
>>>>>>>>>>>>>> >>> clang-16: error: unknown argument '-version'; did you
>>>>>>>>>>>>>> mean '--version'?
>>>>>>>>>>>>>> >>> clang-16: error: no input files
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"sage-devel" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to sage-devel+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/sage-devel/a74a1e4d-e10e-4dfa-829c-5400f0ef6d4en%40googlegroups.com.
