On Tuesday, February 6, 2024 at 5:14:56 PM UTC-6 Matthias Koeppe wrote:
>
> and
> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src/config.log
>
> please
>
> On Tuesday, February 6, 2024 at 2:36:21 PM UTC-8 Sai Chandhrasekhar wrote:
>
>> On Tuesday, February 6, 2024 at 4:22:59 PM UTC-6 Matthias Koeppe wrote:
>>
>>> Could you post one of these log files please? For example info-6.8.log
>>>
>>> And could you try "python3 -m pip install --pre sage_conf" also?
>>>
>>> On Tuesday, February 6, 2024 at 12:15:08 PM UTC-8 Sai Chandhrasekhar
>>> wrote:
>>>
>>>> When I ran python3 -m pip install sage_conf I got this error message:
>>>>
>>>> Error building Sage.
>>>>
>>>>
>>>>
>>>> The following package(s) may have failed to build (not necessarily
>>>>
>>>> during this run of 'make all-build'):
>>>>
>>>>
>>>>
>>>> * package: gf2x-1.3.0
>>>>
>>>> last build time: Feb 6 14:07
>>>>
>>>> log file:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/gf2x-1.3.0.log
>>>>
>>>> build directory:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/gf2x-1.3.0
>>>>
>>>>
>>>>
>>>> * package: cddlib-0.94m
>>>>
>>>> last build time: Feb 6 14:07
>>>>
>>>> log file:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/cddlib-0.94m.log
>>>>
>>>> build directory:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/cddlib-0.94m
>>>>
>>>>
>>>>
>>>> * package: cliquer-1.22
>>>>
>>>> last build time: Feb 6 14:07
>>>>
>>>> log file:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/cliquer-1.22.log
>>>>
>>>> build directory:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/cliquer-1.22
>>>>
>>>>
>>>>
>>>> * package: libatomic_ops-7.8.0
>>>>
>>>> last build time: Feb 6 14:07
>>>>
>>>> log file:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/libatomic_ops-7.8.0.log
>>>>
>>>> build directory:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0
>>>>
>>>>
>>>>
>>>> * package: m4ri-20200115
>>>>
>>>> last build time: Feb 6 14:07
>>>>
>>>> log file:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/m4ri-20200115.log
>>>>
>>>> build directory:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/m4ri-20200115
>>>>
>>>>
>>>>
>>>> * package: ecm-7.0.5
>>>>
>>>> last build time: Feb 6 14:07
>>>>
>>>> log file:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/ecm-7.0.5.log
>>>>
>>>> build directory:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/ecm-7.0.5
>>>>
>>>>
>>>>
>>>> * package: info-6.8
>>>>
>>>> last build time: Feb 6 14:07
>>>>
>>>> log file:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/info-6.8.log
>>>>
>>>> build directory:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/info-6.8
>>>>
>>>>
>>>>
>>>> * package: pari-2.15.4
>>>>
>>>> last build time: Feb 6 14:08
>>>>
>>>> log file:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/logs/pkgs/pari-2.15.4.log
>>>>
>>>> build directory:
>>>> /Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/pari-2.15.4
>>>>
>>>>
>>>> For those packages the following error message was printed earlier:
>>>>
>>>> configure: error: C compiler cannot create executables
>>>>
>>>> On Tuesday, February 6, 2024 at 2:01:03 PM UTC-6 Matthias Koeppe wrote:
>>>>
>>>>> According to your config.log, the run of "configure" succeeded.
>>>>> That config.log contains error messages from various compiler
>>>>> invocations is a normal part of the configure process.
>>>>>
>>>>> What is the actual problem that you encountered?
>>>>>
>>>>>
>>>>> On Monday, February 5, 2024 at 2:58:36 PM UTC-8 Sai Chandhrasekhar
>>>>> wrote:
>>>>>
>>>>>> On Monday, February 5, 2024 at 4:48:08 PM UTC-6 Dima Pasechnik wrote:
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 5 February 2024 21:58:54 GMT, "dan...@gmail.com" <
>>>>>>> dan...@gmail.com> wrote:
>>>>>>> >You could just use Sage_macOS
>>>>>>> ><https://github.com/3-manifolds/Sage_macOS/releases/tag/v2.2.0>,
>>>>>>> quick and
>>>>>>> >easy!
>>>>>>>
>>>>>>> for Sage development, you need a source install.
>>>>>>>
>>>>>>> >
>>>>>>> >On Monday, February 5, 2024 at 3:49:02 PM UTC-6 Matthias Koeppe
>>>>>>> wrote:
>>>>>>> >
>>>>>>> >> We would need to see the full logs
>>>>>>> >>
>>>>>>> >> On Monday, February 5, 2024 at 1:26:31 PM UTC-8 Sai
>>>>>>> Chandhrasekhar wrote:
>>>>>>> >>
>>>>>>> >>> Hello,
>>>>>>> >>>
>>>>>>> >>> When I tried to run python3 -m pip install sage_conf, I got this
>>>>>>> error
>>>>>>> >>> message from config.log. I tried to change to GCC but then I got
>>>>>>> a message
>>>>>>> >>> that Sage cannot be built on macOS with GNU's gcc. Any
>>>>>>> suggestions on what
>>>>>>> >>> to do would be appreciated.
>>>>>>> >>> configure:6595: x86_64-apple-darwin13.4.0-clang -V >&5
>>>>>>> >>> clang-16: error: argument to '-V' is missing (expected 1 value)
>>>>>>> >>> clang-16: error: no input files
>>>>>>> >>> configure:6606: $? = 1
>>>>>>> >>> configure:6595: x86_64-apple-darwin13.4.0-clang -qversion >&5
>>>>>>> >>> clang-16: error: unknown argument '-qversion'; did you mean
>>>>>>> '--version'?
>>>>>>> >>> clang-16: error: no input files
>>>>>>> >>> configure:6606: $? = 1
>>>>>>> >>> configure:6595: x86_64-apple-darwin13.4.0-clang -version >&5
>>>>>>> >>> clang-16: error: unknown argument '-version'; did you mean
>>>>>>> '--version'?
>>>>>>> >>> clang-16: error: no input files
>>>>>>> >>>
>>>>>>> >>
>>>>>>> >
>>>>>>>
>>>>>>
--
You received this message because you are subscribed to the Google Groups
"sage-devel" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to sage-devel+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/sage-devel/502e5614-0807-4c14-8ba0-9d79b0898be6n%40googlegroups.com.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libatomic_ops configure 7.8.0, which was
generated by GNU Autoconf 2.71. Invocation command line was
$ ./configure --prefix=/Users/user/.sage/sage-10.2-Darwin-x86_64/local
--libdir=/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib --disable-static
--enable-static
## --------- ##
## Platform. ##
## --------- ##
hostname = client-10-229-49-234.tamulink.tamu.edu
uname -m = x86_64
uname -r = 23.2.0
uname -s = Darwin
uname -v = Darwin Kernel Version 23.2.0: Wed Nov 15 21:54:10 PST 2023;
root:xnu-10002.61.3~2/RELEASE_X86_64
/usr/bin/uname -p = i386
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = Mach kernel version:
Darwin Kernel Version 23.2.0: Wed Nov 15 21:54:10 PST 2023;
root:xnu-10002.61.3~2/RELEASE_X86_64
Kernel configured for up to 8 processors.
4 processors are physically available.
8 processors are logically available.
Processor type: x86_64h (Intel x86-64h Haswell)
Processors active: 0 1 2 3 4 5 6 7
Primary memory available: 8.00 gigabytes
Default processor set: 698 tasks, 2830 threads, 8 processors
Load average: 10.51, Mach factor: 0.49
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /Users/user/.sage/sage-10.2-Darwin-x86_64/build/bin/
PATH:
/Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/lib/sage/venv-python3.9/bin/
PATH: /Users/user/.sage/sage-10.2-Darwin-x86_64/local/bin/
PATH: /Users/user/.sage/sage-10.2-Darwin-x86_64/build/bin/
PATH: /Users/user/.sage/sage-10.2-Darwin-x86_64/local/bin/
PATH: /Users/user/.sage/sage-10.2-Darwin-x86_64/src/bin/
PATH: /Users/user/.sage/sage-10.2-Darwin-x86_64/local/bin/
PATH: /Users/user/.sage/sage-10.2-Darwin-x86_64/build/bin/
PATH: /Users/user/.sage/sage-10.2-Darwin-x86_64/src/bin/
PATH: /Users/user/.sage/sage-10.2-Darwin-x86_64/local/bin/
PATH:
/private/var/folders/8q/d9z4ndqs3wnfgmj69fmpr6640000gn/T/pip-build-env-tbimwh6s/overlay/bin/
PATH:
/private/var/folders/8q/d9z4ndqs3wnfgmj69fmpr6640000gn/T/pip-build-env-tbimwh6s/normal/bin/
PATH: /Users/user/anaconda3/bin/
PATH: /Users/user/anaconda3/condabin/
PATH: /Users/user/.rbenv/shims/
PATH: /opt/local/bin/
PATH: /opt/local/sbin/
PATH: /usr/local/bin/
PATH: /System/Cryptexes/App/usr/bin/
PATH: /usr/bin/
PATH: /bin/
PATH: /usr/sbin/
PATH: /sbin/
PATH: /var/run/com.apple.security.cryptexd/codex.system/bootstrap/usr/local/bin/
PATH: /var/run/com.apple.security.cryptexd/codex.system/bootstrap/usr/bin/
PATH:
/var/run/com.apple.security.cryptexd/codex.system/bootstrap/usr/appleinternal/bin/
PATH: /Users/user/Library/Python/3.9/bin/
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2448: looking for aux files: ltmain.sh compile missing install-sh
config.guess config.sub
configure:2461: trying ./
configure:2490: ./ltmain.sh found
configure:2490: ./compile found
configure:2490: ./missing found
configure:2472: ./install-sh found
configure:2490: ./config.guess found
configure:2490: ./config.sub found
configure:2610: checking build system type
configure:2625: result: x86_64-apple-darwin13.4.0
configure:2645: checking host system type
configure:2659: result: x86_64-apple-darwin13.4.0
configure:2679: checking target system type
configure:2693: result: x86_64-apple-darwin13.4.0
configure:2738: checking for a BSD-compatible install
configure:2811: result: /usr/bin/install -c
configure:2822: checking whether build environment is sane
configure:2877: result: yes
configure:3036: checking for a race-free mkdir -p
configure:3080: result: ./install-sh -c -d
configure:3087: checking for gawk
configure:3122: result: no
configure:3087: checking for mawk
configure:3122: result: no
configure:3087: checking for nawk
configure:3122: result: no
configure:3087: checking for awk
configure:3108: found /usr/bin/awk
configure:3119: result: awk
configure:3130: checking whether make sets $(MAKE)
configure:3153: result: yes
configure:3183: checking whether make supports nested variables
configure:3201: result: yes
configure:3338: checking whether to enable maintainer-specific portions of
Makefiles
configure:3348: result: no
configure:3378: checking whether make supports the include directive
configure:3393: make -f confmf.GNU && cat confinc.out
make[5]: Entering directory
'/Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src'
make[5]: Leaving directory
'/Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src'
this is the am__doit target
configure:3396: $? = 0
configure:3415: result: yes (GNU style)
configure:3446: checking for x86_64-apple-darwin13.4.0-gcc
configure:3478: result: x86_64-apple-darwin13.4.0-clang
configure:3876: checking for C compiler version
configure:3885: x86_64-apple-darwin13.4.0-clang --version >&5
clang version 16.0.6
Target: x86_64-apple-darwin13.4.0
Thread model: posix
InstalledDir: /Users/user/anaconda3/bin
configure:3896: $? = 0
configure:3885: x86_64-apple-darwin13.4.0-clang -v >&5
clang version 16.0.6
Target: x86_64-apple-darwin13.4.0
Thread model: posix
InstalledDir: /Users/user/anaconda3/bin
configure:3896: $? = 0
configure:3885: x86_64-apple-darwin13.4.0-clang -V >&5
clang-16: error: argument to '-V' is missing (expected 1 value)
clang-16: error: no input files
configure:3896: $? = 1
configure:3885: x86_64-apple-darwin13.4.0-clang -qversion >&5
clang-16: error: unknown argument '-qversion'; did you mean '--version'?
clang-16: error: no input files
configure:3896: $? = 1
configure:3885: x86_64-apple-darwin13.4.0-clang -version >&5
clang-16: error: unknown argument '-version'; did you mean '--version'?
clang-16: error: no input files
configure:3896: $? = 1
configure:3916: checking whether the C compiler works
configure:3938: x86_64-apple-darwin13.4.0-clang -march=core2 -mtune=haswell
-mssse3 -ftree-vectorize -fPIC -fstack-protector-strong -O2 -pipe -isystem
/Users/user/anaconda3/include -D_FORTIFY_SOURCE=2 -isystem
/Users/user/anaconda3/include
-L/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-Wl,-ld_classic,-rpath,/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-L/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-Wl,-ld_classic,-rpath,/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-Wl,-headerpad_max_install_names -Wl,-dead_strip_dylibs
-Wl,-rpath,/Users/user/anaconda3/lib -L/Users/user/anaconda3/lib conftest.c >&5
ld: library not found for -ld_classic
clang-16: error: linker command failed with exit code 1 (use -v to see
invocation)
configure:3942: $? = 1
configure:3982: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "libatomic_ops"
| #define PACKAGE_TARNAME "libatomic_ops"
| #define PACKAGE_VERSION "7.8.0"
| #define PACKAGE_STRING "libatomic_ops 7.8.0"
| #define PACKAGE_BUGREPORT "https://github.com/ivmai/libatomic_ops/issues";
| #define PACKAGE_URL ""
| #define PACKAGE "libatomic_ops"
| #define VERSION "7.8.0"
| /* end confdefs.h. */
|
| int
| main (void)
| {
|
| ;
| return 0;
| }
configure:3987: error: in
`/Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src':
configure:3989: error: C compiler cannot create executables
See `config.log' for more details
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-apple-darwin13.4.0
ac_cv_env_CCASFLAGS_set=
ac_cv_env_CCASFLAGS_value=
ac_cv_env_CCAS_set=
ac_cv_env_CCAS_value=
ac_cv_env_CC_set=set
ac_cv_env_CC_value=x86_64-apple-darwin13.4.0-clang
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -mtune=haswell -mssse3 -ftree-vectorize
-fPIC -fstack-protector-strong -O2 -pipe -isystem /Users/user/anaconda3/include'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value='-D_FORTIFY_SOURCE=2 -isystem
/Users/user/anaconda3/include'
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-L/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-Wl,-ld_classic,-rpath,/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-L/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-Wl,-ld_classic,-rpath,/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-Wl,-headerpad_max_install_names -Wl,-dead_strip_dylibs
-Wl,-rpath,/Users/user/anaconda3/lib -L/Users/user/anaconda3/lib'
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_LT_SYS_LIBRARY_PATH_set=
ac_cv_env_LT_SYS_LIBRARY_PATH_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=x86_64-apple-darwin13.4.0
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=x86_64-apple-darwin13.4.0
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_func_malloc_0_nonnull=yes
ac_cv_func_realloc_0_nonnull=yes
ac_cv_host=x86_64-apple-darwin13.4.0
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=awk
ac_cv_prog_CC=x86_64-apple-darwin13.4.0-clang
ac_cv_prog_make_make_set=yes
ac_cv_target=x86_64-apple-darwin13.4.0
am_cv_make_support_nested_variables=yes
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL}
'\''/Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src/missing'\''
aclocal-1.16'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
AR='x86_64-apple-darwin13.4.0-ar'
AUTOCONF='${SHELL}
'\''/Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src/missing'\''
autoconf'
AUTOHEADER='${SHELL}
'\''/Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src/missing'\''
autoheader'
AUTOMAKE='${SHELL}
'\''/Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src/missing'\''
automake-1.16'
AWK='awk'
CC='x86_64-apple-darwin13.4.0-clang'
CCAS=''
CCASDEPMODE=''
CCASFLAGS=''
CCDEPMODE=''
CFLAGS='-march=core2 -mtune=haswell -mssse3 -ftree-vectorize -fPIC
-fstack-protector-strong -O2 -pipe -isystem /Users/user/anaconda3/include'
CFLAGS_EXTRA=''
CPPFLAGS='-D_FORTIFY_SOURCE=2 -isystem /Users/user/anaconda3/include'
CSCOPE='cscope'
CTAGS='ctags'
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C='\c'
ECHO_N=''
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_GPL_FALSE=''
ENABLE_GPL_TRUE=''
ENABLE_SHARED_FALSE=''
ENABLE_SHARED_TRUE=''
ETAGS='etags'
EXEEXT=''
FGREP=''
FILECMD=''
GREP=''
HAVE_PTHREAD_H_FALSE=''
HAVE_PTHREAD_H_TRUE=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD='x86_64-apple-darwin13.4.0-ld'
LDFLAGS='-L/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-Wl,-ld_classic,-rpath,/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-L/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-Wl,-ld_classic,-rpath,/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib
-Wl,-headerpad_max_install_names -Wl,-dead_strip_dylibs
-Wl,-rpath,/Users/user/anaconda3/lib -L/Users/user/anaconda3/lib'
LIBOBJS=''
LIBS=''
LIBTOOL='x86_64-apple-darwin13.4.0-libtool'
LIPO='x86_64-apple-darwin13.4.0-lipo'
LN_S=''
LTLIBOBJS=''
LT_SYS_LIBRARY_PATH=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='${SHELL}
'\''/Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src/missing'\''
makeinfo'
MANIFEST_TOOL=''
MKDIR_P='./install-sh -c -d'
NEED_ASM_FALSE=''
NEED_ASM_TRUE=''
NM='x86_64-apple-darwin13.4.0-nm'
NMEDIT='x86_64-apple-darwin13.4.0-nmedit'
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL='x86_64-apple-darwin13.4.0-otool'
PACKAGE='libatomic_ops'
PACKAGE_BUGREPORT='https://github.com/ivmai/libatomic_ops/issues'
PACKAGE_NAME='libatomic_ops'
PACKAGE_STRING='libatomic_ops 7.8.0'
PACKAGE_TARNAME='libatomic_ops'
PACKAGE_URL=''
PACKAGE_VERSION='7.8.0'
PATH_SEPARATOR=':'
PICFLAG=''
RANLIB='x86_64-apple-darwin13.4.0-ranlib'
SED=''
SET_MAKE=''
SHELL='/bin/bash'
STRIP='x86_64-apple-darwin13.4.0-strip'
THREADDLLIBS=''
VERSION='7.8.0'
ac_ct_AR=''
ac_ct_CC=''
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCCAS_FALSE=''
am__fastdepCCAS_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build='x86_64-apple-darwin13.4.0'
build_alias='x86_64-apple-darwin13.4.0'
build_cpu='x86_64'
build_os='darwin13.4.0'
build_vendor='apple'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-apple-darwin13.4.0'
host_alias='x86_64-apple-darwin13.4.0'
host_cpu='x86_64'
host_os='darwin13.4.0'
host_vendor='apple'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL}
/Users/user/.sage/sage-10.2-Darwin-x86_64/local/var/tmp/sage/build/libatomic_ops-7.8.0/src/install-sh'
libdir='/Users/user/.sage/sage-10.2-Darwin-x86_64/local/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/Users/user/.sage/sage-10.2-Darwin-x86_64/local'
program_transform_name='s,x,x,'
psdir='${docdir}'
runstatedir='${localstatedir}/run'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='x86_64-apple-darwin13.4.0'
target_alias=''
target_cpu='x86_64'
target_os='darwin13.4.0'
target_vendor='apple'
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "libatomic_ops"
#define PACKAGE_TARNAME "libatomic_ops"
#define PACKAGE_VERSION "7.8.0"
#define PACKAGE_STRING "libatomic_ops 7.8.0"
#define PACKAGE_BUGREPORT "https://github.com/ivmai/libatomic_ops/issues";
#define PACKAGE_URL ""
#define PACKAGE "libatomic_ops"
#define VERSION "7.8.0"
configure: exit 77
