David, can you test the md5sum of the downloaded .dmg file. At the terminal md5 <file name>
On Jan 6, 11:48 am, "Justin C. Walker" <[EMAIL PROTECTED]> wrote: > On Jan 5, 2008, at 22:08 , Joshua Kantor wrote: > > > > > Hello. for the dvd we are including a dmg file. There was some > > problems with the initial version of this. I believe the following is > > working, > > but if anyone else could test that following the instructions works > > fine on their system that would be appreciated. Again this is osx 10.4 > > intel > > >http://sage.math.washington.edu/home/jkantor/sage-2.9.2-osx10.4- > > intel-i386-Darwin.dmg > > Tried this on Mac OS X, 10.4.11, on a Dual Quad Xeon system. I think > it's a success, but there are a few nits. The details: > > The DMG mounted successfully, and I dragged the 'sage' folder to a > local disk. > > Starting 'sage' in the copied directory gave me the 'may have moved' > message, and then startup completed without a peep. > > I ran "make test" (with -j6) in this directory, and this was the > final output: > > All tests passed! > Total time for all tests: 2339.3 seconds > > However, the ".tex" tests actually all failed. The log file doesn't > show all the details, so I'm including them here. In addition, there > were a batch of dependency warnings. I'm not sure whether they point > to a problem. 'test.log' is at "sage.math.washington.edu:~justin/ > logs/dmg-test.log". > > Justin > > cd spkg && ./install all 2>&1 | tee -a ../install.log > ls: bzip2-*-install: No such file or directory > ls: dir-*-install: No such file or directory > ls: prereq-*-install: No such file or directory > standard/deps:39: warning: overriding commands for target `installed/' > standard/deps:36: warning: ignoring old commands for target `installed/' > standard/deps:42: warning: overriding commands for target `installed/' > standard/deps:39: warning: ignoring old commands for target `installed/' > standard/deps:157: warning: overriding commands for target `installed/' > standard/deps:42: warning: ignoring old commands for target `installed/' > make[1]: Circular installed/python-2.5.1.p10 <- installed/ dependency > dropped. > make[1]: Circular installed/python-2.5.1.p10 <- installed/ dependency > dropped. > make[1]: Circular installed/python-2.5.1.p10 <- installed/ dependency > dropped. > make[1]: Circular installed/zlib-1.2.3.p2 <- installed/ dependency > dropped. > make[1]: Circular installed/zlib-1.2.3.p2 <- installed/ dependency > dropped. > make[1]: Circular installed/zlib-1.2.3.p2 <- installed/ dependency > dropped. > make[1]: Circular installed/termcap-1.3.1 <- installed/ dependency > dropped. > make[1]: Circular installed/termcap-1.3.1 <- installed/ dependency > dropped. > make[1]: Circular installed/termcap-1.3.1 <- installed/ dependency > dropped. > make[1]: Circular installed/readline-5.2 <- installed/ dependency > dropped. > make[1]: Circular installed/readline-5.2 <- installed/ dependency > dropped. > make[1]: Circular installed/readline-5.2 <- installed/ dependency > dropped. > make[1]: Circular installed/libpng-1.2.22.p3 <- installed/ dependency > dropped. > make[1]: Circular installed/libpng-1.2.22.p3 <- installed/ dependency > dropped. > make[1]: Circular installed/libpng-1.2.22.p3 <- installed/ dependency > dropped. > make[1]: Circular installed/ <- installed/ dependency dropped. > make[1]: Circular installed/ <- installed/ dependency dropped. > make[1]: Circular installed/ <- installed/ dependency dropped. > make[1]: Nothing to be done for `all'. > > real 0m0.008s > user 0m0.003s > sys 0m0.004s > To install gap, gp, singular, etc., scripts > in a standard bin directory, start sage and > type something like > sage: install_scripts('/usr/local/bin') > at the SAGE command prompt. > > SAGE build/upgrade complete! > . local/bin/sage-env && sage-maketest > /tmp/sage/local/bin/sage-maketest: line 4: /tmp/sage/tmp/test.log: No > such file or directory > /tmp/sage/local/bin/sage-maketest: line 5: /tmp/sage/tmp/test.log: No > such file or directory > tee: /tmp/sage/tmp/test.log: No such file or directory > tmp directory doesn't exist - creating ... > dsage-trial tmp directory doesn't exist - creating ... > This script will run the unit tests for DSage > Running 40 tests. > sage.dsage.database.tests.test_clientdb > ClientDatabaseTestCase > > testadd_user ... [ > OK] > > testdel_user ... [ > OK] > > testset_enabled ... [ > OK] > > testupdate_login_time ... [ > OK] > sage.dsage.database.tests.test_job > JobTestCase > > testcreate_job ... [ > OK] > > testjobCreationTime ... [ > OK] > > testjobFailures ... [ > OK] > > testjobFile ... [ > OK] > > testjobFinishTime ... [ > OK] > > testjobKilled ... [ > OK] > > testjobResult ... [ > OK] > > testjobStatus ... [ > OK] > > testjobUpdateTime ... [ > OK] > > testjob_id ... [ > OK] > sage.dsage.database.tests.test_jobdb > JobDatabaseSQLiteTestCase > > testcreate_jdict ... [ > OK] > > testget_job ... [ > OK] > > testget_job_by_id ... [ > OK] > > testget_killed_jobs_list ... [ > OK] > > testhas_job ... [ > OK] > > teststore_job ... [ > OK] > sage.dsage.server.tests.test_server > DSageServerTestCase > > testget_active_clients_list ... [ > OK] > > testget_active_jobs ... [ > OK] > > testget_all_jobs ... [ > OK] > > testget_job ... [ > OK] > > testget_job_by_id ... [ > OK] > > testget_job_result_by_id ... [ > OK] > > testget_jobs_by_username ... [ > OK] > > testget_killed_jobs_list ... [ > OK] > > testjob_done ... [ > OK] > > testjob_failed ... [ > OK] > > testkill_job ... [ > OK] > > testsubmit_job ... [ > OK] > sage.dsage.twisted.tests.test_pubkeyauth > PublicKeyCredentialsCheckerTest > > testBadLogin3 ... [ > OK] > > testLogin ... [ > OK] > sage.dsage.twisted.tests.test_remote > ClientRemoteCallsTest > > testremoteSubmitBadJob ... [ > OK] > > testremoteSubmitJob ... [ > OK] > MonitorRemoteCallsTest > > testget_killed_jobs_list ... [ > OK] > > testremote_get_job ... [ > OK] > > testremote_job_done ... [ > OK] > > testremote_job_failed ... [ > OK] > > ------------------------------------------------------------------------ > ------- > Ran 40 tests in 5.332s > > PASSED (successes=40) > Testing of examples currently not implemented. > Testing SAGE documentation > Testing SAGE tutorial > /tmp/sage/local/bin/sage-maketest: line 18: cd: /tmp/sage/devel/doc/ > tut: No such file or directory > ERROR: File ./tut.tex is missing > exit code: 1 > > ---------------------------------------------------------------------- > The following tests failed: > > ./tut.tex > Total time for all tests: 0.0 seconds > Testing SAGE programming guide > /tmp/sage/local/bin/sage-maketest: line 22: cd: /tmp/sage/devel/doc/ > prog: No such file or directory > ERROR: File ./prog.tex is missing > exit code: 1 > > ---------------------------------------------------------------------- > The following tests failed: > > ./prog.tex > Total time for all tests: 0.0 seconds > Testing SAGE constructions guide > /tmp/sage/local/bin/sage-maketest: line 26: cd: /tmp/sage/devel/doc/ > const: No such file or directory > ERROR: File ./const.tex is missing > exit code: 1 > > ---------------------------------------------------------------------- > The following tests failed: > > ./const.tex > Total time for all tests: 0.0 seconds > > -- > Justin C. Walker, Curmudgeon-At-Large > Institute for the Enhancement of the Director's Income > -------- > When LuteFisk is outlawed, > Only outlaws will have LuteFisk > -------- --~--~---------~--~----~------------~-------~--~----~ To post to this group, send email to sage-devel@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/sage-devel URLs: http://sage.scipy.org/sage/ and http://modular.math.washington.edu/sage/ -~----------~----~----~----~------~----~------~--~---
