That's too bad the previous installer seemed to perhaps be thinking in the
right way originally but just was wrongly implemented. Perhaps treat it
like we used to with powerful hydro systems and add a couple 48v dump loads
if the unit's voltage control mechanisms can't be figured out? In the past
I sometimes had difficulties obtaining Kohler manuals but did come across
this one.

https://www.manualslib.com/manual/1660998/Kohler-6vsg.html?page=24#manual

Luke's ideas seem pretty ideal though.

Good luck, Nick


On Wed, Oct 9, 2024 at 2:19 PM Peter Giroux via RE-wrenches <
re-wrenches@lists.re-wrenches.org> wrote:

> Afternoon wrenchers.
>
>
>
>   Have something I have never seen. Visited a prospect last week who has a
> larger system that was installed wrong. We are looking at fixing it. One of
> the issues, the customer was told to buy and install a Kohler 6VSG 48 Volt
> DC generator. The original installer ran the DC outputs into the AC inputs
> of the inverters. Needless to say, application does not work. It was
> mentioned to me that these DC Gensets need a “Buffer “ between the gen and
> the battery bank.
>
>
>
>   Have reached out to Kohler, no clue, Kohlers top resellers, no clue. Off
> grid resellers in our industry, no clue.  Anybody here have a clue and the
> proper way to run / use this generator to safely charge the large battery
> bank.
>
>
>
> Any and all help greatly appreciated.
>
>
>
> Thx
>
> Peter Giroux
>
> American Solar & Alternative Energy Solutions inc
>
> Beautiful Norcross Ga
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to