Hiya William, Does the empty GSLC come with a top, or do you fabricate a top where the Radian usually bolts on? Would love to see a picture of your dead front hinge, I always wanted to to that…. Thanks,
Jason Lerner Waldron Power and Light Co. > On Mar 1, 2022, at 8:53 AM, William Miller <will...@millersolar.com> wrote: > > Kirk: > > We purchase only the empty GSLC cabinets. They do include the breaker > brackets and bus bars. I have received the cabinets missing hardware so check > the inventory beforehand. > > Here are a few hints you probably already know: > > The shunts are the shoddiest construction and it is very easy to break the > plastic base. Torque the upper shunt bolt after all other bus hardware is > torqued. > > I recommend using two 175A breakers. For some troubleshooting procedures it > is necessary to isolate the two power modules. > > An empty GSLC cabinet makes an acceptable PV recombiner. We cut off the > bottom dead front tab and substitute a hinge. We wire the breakers with the > dead font tilted out flat and all leads hinging at the bottom. > > We never install any AC breakers in the GSLC cabinets. The back-wiring is > just too awkward. Instead we use outboard breaker panels or panel boards—one > for Gen Fed and one for Inverter Fed. > > For bypassing we fabricate custom slide plates bolted to the dead-front to > interlock output breakers. It’s not listed but with good craftsmanship it > looks official. > > Here are a few photos: > > https://millersolar.com/MillerSolar/Portfolio/Inverters/battery_iinverters/JP_Radian/JP_Radian.html > > <https://millersolar.com/MillerSolar/Portfolio/Inverters/battery_iinverters/JP_Radian/JP_Radian.html> > > I hope the above info is helpful. > > William Miller > > On Tue, Mar 1, 2022 at 6:23 AM Kirk Herander <kirkh@vermont.solar> wrote: > All, > > I am doing a multiple stacked Radian GS8048 system. And all I need in my > design is two OB 175 a breakers in a box which integrates w/ each respective > inverter. The manual bypass switch is useless, for all inverters need to be > bypassed at once using a single external bypass. OB does not make a version > of the GSLC which only has the inverter breakers. They do make an empty GSLC > with nothing in it. But no mounting assembly for the breakers, and no add-on > kit offering to do this either. > I thought Midnite made something compatible, but don't see it on their web > site. Any ideas? Thanks. > > -- > Kirk Herander / <>kirkh@vermont.solar <mailto:kirkh@vermont.solar> > Owner|Principal, VT Solar, LLC > Celebrating our 31st Anniversary 1991-2022!! > www.vermont.solar > <https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636842843233477645&sdata=0NjyuKeQbEK6245SNnk8X4XnP9Q%2B%2BqtvcALkdDghvk4%3D&reserved=0> > dba Vermont Solar Engineering > 802.863.1202 > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > <http://re-wrenches.org/> > > List Address: RE-wrenches@lists.re-wrenches.org > <mailto:RE-wrenches@lists.re-wrenches.org> > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > <https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/> > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org> > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > <http://www.re-wrenches.org/etiquette.htm> > > Check out or update participant bios: > http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/> > > -- > > William Miller > Miller Solar.com > 895-438-5600 > www.millersolar.com <http://www.millersolar.com/> > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
