Thanks, Nick. That's the information I was looking for. For others interested in doing this I found the instructions here:
https://support.enphase.com/s/article/Manual-override-mode-for-Enphase-Storage Jason On Mon, Sep 13, 2021, 10:07 PM Nick Soleil <nsol...@enphaseenergy.com> wrote: > Hey Jason, > > Yes, you can install the Enpower prior to the storage system. You will > just need to leave the Enpower in Manual Bypass mode. > > Cordially, > > Nick Soleil > > Enphase Energy Senior Product Manager > > (707) 763-4784 x7267 // office > > (707) 321-2937 // cell > > *Powering What’s Next*™* | *The Enphase Energy Management System > <https://enphase.com/en-us/products-and-services/envoy> > > NABCEP Certified Solar PV Installer #03262011-300 > > California C10 Licensed Electrician #986315 > > ------------------------------ > *From:* RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> on behalf > of Jason Szumlanski <ja...@floridasolardesigngroup.com> > *Sent:* Friday, September 10, 2021 11:27 AM > *To:* RE-wrenches <re-wrenches@lists.re-wrenches.org> > *Subject:* Re: [RE-wrenches] Enphase Enpower Smart Switch as service > disconnect > > *EXTERNAL EMAIL* - *Use caution when responding, clicking, and/or > downloading attachments.* > > > > > Yeah, I know it's service rated here, but I wanted to make sure it would > work functionally. I guess it's no different than a service rated generator > ATS in that you can install the ATS without the generator and just have it > there for future use. > > Thanks all for the feedback. > > Jason Szumlanski > > > > On Fri, Sep 10, 2021, 2:01 PM Eric Smiley <e...@vecoop.ca> wrote: > > The spec sheet indicates it is rated as Service Equipment in the US but > not in Canada. :-( > > > *Eric Smiley,* Project Manager > e...@vecoop.ca > T: 250.703.6004 <+12507036004> > T: 888.386.0116 <+18883860116> > *VIRIDIANENERGY.CA <https://viridianenergy.ca/>* > > > > On Fri, 10 Sept 2021 at 10:51, Jason Szumlanski < > ja...@floridasolardesigngroup.com> wrote: > > Yes, I plan to install both a main breaker and a load breaker because both > will be necessary in my ultimate design. I don't plan on installing an > Envoy at this time. So I can't do any of the commissioning tasks. > > I will let you know how it goes. > > On Fri, Sep 10, 2021, 12:50 PM Rebekah Hren <rebekah.h...@gmail.com> > wrote: > > I don't see why not, I have one I'm experimenting with in my garage now > and it passes power through the bus prior to commissioning. I would make > sure to add the Eaton BR main breaker in the Enpower at whatever amperage > required for a more trustworthy discontent than the relay manual switch. It > doesn't come with any breakers. > > You could also commission it as a single device, perhaps? The app lets you > add devices later. > Let us know if you try it! > Rebekah > > On Fri, Sep 10, 2021, 7:57 AM Jason Szumlanski < > ja...@floridasolardesigngroup.com> wrote: > > Does anyone know if you can use the Smart Switch as a simple service > disconnect if not installing solar and batteries now and have it work out > of the box without any commissioning? > > I have a client building a new house and they are going to add solar and > batteries after the certificate of occupancy is issued. I want to get the > Smart switch installed as a service disconnect so I don't have to pull the > meter later. I assume I can trust use the load side lugs to feed the main > distribution panel in the home. > > Jason Szumlanski > Florida Solar Design Group > _______________________________________________ > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
