The spec sheet indicates it is rated as Service Equipment in the US but not in Canada. :-(
*Eric Smiley,* Project Manager e...@vecoop.ca T: 250.703.6004 <+12507036004> T: 888.386.0116 <+18883860116> *VIRIDIANENERGY.CA <https://viridianenergy.ca/>* * <https://viridianenergy.ca/>* On Fri, 10 Sept 2021 at 10:51, Jason Szumlanski < ja...@floridasolardesigngroup.com> wrote: > Yes, I plan to install both a main breaker and a load breaker because both > will be necessary in my ultimate design. I don't plan on installing an > Envoy at this time. So I can't do any of the commissioning tasks. > > I will let you know how it goes. > > On Fri, Sep 10, 2021, 12:50 PM Rebekah Hren <rebekah.h...@gmail.com> > wrote: > >> I don't see why not, I have one I'm experimenting with in my garage now >> and it passes power through the bus prior to commissioning. I would make >> sure to add the Eaton BR main breaker in the Enpower at whatever amperage >> required for a more trustworthy discontent than the relay manual switch. It >> doesn't come with any breakers. >> >> You could also commission it as a single device, perhaps? The app lets >> you add devices later. >> Let us know if you try it! >> Rebekah >> >> On Fri, Sep 10, 2021, 7:57 AM Jason Szumlanski < >> ja...@floridasolardesigngroup.com> wrote: >> >>> Does anyone know if you can use the Smart Switch as a simple service >>> disconnect if not installing solar and batteries now and have it work out >>> of the box without any commissioning? >>> >>> I have a client building a new house and they are going to add solar and >>> batteries after the certificate of occupancy is issued. I want to get the >>> Smart switch installed as a service disconnect so I don't have to pull the >>> meter later. I assume I can trust use the load side lugs to feed the main >>> distribution panel in the home. >>> >>> Jason Szumlanski >>> Florida Solar Design Group >>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> Pay optional member dues here: http://re-wrenches.org >>> >>> List Address: RE-wrenches@lists.re-wrenches.org >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> There are two list archives for searching. When one doesn't work, try >>> the other: >>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette: >>> http://www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> http://www.members.re-wrenches.org >>> >>> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
