The Schneider RSD is decent. At least it is useable as a 600vdc disco. The few offgrid homes that were required to use this had the Tigo units on the array panels and wireless comm to the RSD. As soon as the inspector was done, those went to Ebay. I never use a roof but have used a barn for panels.
AFCI, GFCI, and now RSD are just more things to fail when you need them the most, like during a wildfire or hurricane. I know you folks have to do what you need to do to stay in business. For me, electronics are IN a covered building. Always! Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ [1] e-mail offgridso...@sti.net [2] text 209 813 0060 On Fri, 27 Aug 2021 07:48:34 -0800, James Jarvis wrote: So who has a good reliable off grid RSD? It all looks like failure prone garbage to me. Thank you, -James Jefferson Jarvis APRS World, LLC +1-507-454-2727 (Sent from my phone. My apologies for spelling errors and brevity.) On Fri, Aug 27, 2021, 05:02 Tump wrote: I would once again say that; we as an industry can influence not only the writing of the code but with what we are _buying_ OR _not buying._ If the devices we are required to install to make things "more safe & reliable", at the cost of our livelihoods & reputations, we all need to make the folks that are building the RSD crap and those who require installation of questionably safe & reliable crap aware of these problems. WE can thru either going to the code development meetings AND NOT buying or installing this stuff. Not too easy when a huge amount of solar is rooftop installs. As many of the installers in the NE know its not a single level ranch were installing this stuff on, short season & man lift required. Tell your supplier why you are not buying that brand, let your supplier border-left:#1010ff 2px solid; margin-left:5px; width:100%"> On Aug 26, 2021, at 2:09 PM, Jeremy Coxon wrote: Carl, Did you get any kind of joy out of APSmart on that failure? I will say that their tech support guy did at least try to be helpful, but the language barrier was really really steep and their distribution channels are less than ideal. Their response to a request for compensation was that they would not be profitable if they had to pay for truck rolls for such a low cost item. I really don't think they GET IT. We've been in business for over 16yrs and this one failure could easily have ended that run. I cannot imagine we're alone here. I was told by AP that their failure rate was 0.2%. Now, I come from a reliability engineering background in petro chemical/ big pharma where a 0.2% failure rate would be catastrophic. Can you imagine that 2 out of every 1000 pills made could cause death? We engineered secondary systems and multiple quality checks to contain catastrophic consequences for components that had know failure rates higher than acceptable values. A simple solution to this fire initiation issue would be a metal enclosure instead of plastic casing. That still doesn't really solve the problem of extra connections though. Best Regards, Jeremy Coxon NABCEP # 091308-21 _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org [5] List Address: RE-wrenches@lists.re-wrenches.org [6] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [7] There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ [8] http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [9] List rules "> TUMP WWW.SWNL.NET Solarwinds Northernlights _ _ _ SERVING MID COAST MAINE font-variant-caps: normal; font-weight: normal; font-size: 10px; line-height: normal; font-family: Arial;"> _ 207-832-7574 CL. 610-517-8401 _ _ __BLAIR "TUMP" MAY_ ******** MAINE'S CHARTER ******** _ __ NABCEP "CERTIFIED PV INSTALLER"_ ******** MAINE'S CHARTER ******** _ TRACE XANTREX "CERTIFIED" DEALER / INSTALLER"_ _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org [12] List Address: RE-wrenches@lists.re-wrenches.org [13] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [14] There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ [15] http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [16] List rules & etiquette: http://www.re-wrenches.org/etiquette.htm [17] Check out or update participant bios: http://www.members.re-wrenches.org [18] Links: ------ [1] http://members.sti.net/offgridsolar/ [2] mailto:offgridso...@sti.net [3] mailto:t...@swnl.net [4] mailto:jco...@sunwindpowerinc.com [5] http://re-wrenches.org [6] mailto:RE-wrenches@lists.re-wrenches.org [7] http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [8] https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ [9] http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [10] http://www.re-wrenches.org/etiquette.htm [11] http://www.members.re-wrenches.org [12] http://re-wrenches.org [13] mailto:RE-wrenches@lists.re-wrenches.org [14] http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [15] https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ [16] http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [17] http://www.re-wrenches.org/etiquette.htm [18] http://www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
