Hi Mac, We use wireway "gutters" all the time. Our supplier mostly sends us Hoffman brand wireways and they also sell a barrier kit:
Here is an example of a barrier and a 4"x4"x24" wireway, you'd need to spec out the dimensions you need for your project: https://hoffman.nvent.com/en-us/products/barrier-kit-bolt/encf44bk60 https://hoffman.nvent.com/en-us/products/straight-section-lay-flat-cover-type-1/encf44t124gvp August Luminalt On Mon, Feb 1, 2021 at 4:12 PM Dave Angelini Offgrid Solar < offgridso...@sti.net> wrote: > Not a day for me. > > I do not care if it is UL listed or not. The Schneider PDP is UL also. Not > high reliability in my opinion! Especially at 600vdc as there is not disco > that will fit in the load center or PDP that I would trust. We all have our > requirements and they can easily exceed UL ! > > > > *Dave Angelini Offgrid Solar > "we go where powerlines don't" > http://members.sti.net/offgridsolar/ <http://members.sti.net/offgridsolar/> > e-mail offgridso...@sti.net <offgridso...@sti.net> > text 209 813 0060* > > On Mon, 1 Feb 2021 19:06:10 -0500, Ray <r...@solarray.com> wrote: > > On both Outback and Midnites's AC/DC Load centers, they just have separate > areas, but there is no partition, or anything like that. They are UL > listed. I don't do GT, so I don't really deal with this issue outside of > the E panel, but if it were me, I'd just zip tie the PV wires together, put > labeling on them so that it was clear they were PV conductors, and call it > a day. > > Ray Walters > Remote Solar > 303 505-8760 > > On 2/1/21 6:55 PM, Dave Angelini Offgrid Solar wrote: > > I land 600vdc PV into the Mppt/Mppt's only. I never mix 600vdc with > anything except SPD/disco ever! > > Just not that hard and for offgrid, standard practice for reliability. > Same with 150vdc, I never get it into the PDP and disco it up stream form > mppt. > > > > *Dave Angelini Offgrid Solar > "we go where powerlines don't" > http://members.sti.net/offgridsolar/ <http://members.sti.net/offgridsolar/> > e-mail offgridso...@sti.net <offgridso...@sti.net> > text 209 813 0060* > > On Mon, 1 Feb 2021 15:37:34 -0700, Mac Lewis <maclew...@gmail.com> > <maclew...@gmail.com> wrote: > > Hello wrenches, > > What are folks using for raceway partitions to comply with 690.31(B) when > running AC/DC and batteries conductors through a common gutter? Is there a > product or just something made by the installer? These multiport inverters > make it difficult not to use a gutter and have a clean installation. > > Thanks! > > -- > > > > Mac Lewis > > "Yo solo sé que no sé nada." -Sócrates > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & > settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other:https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette:http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios:http://www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
