On both Outback and Midnites's AC/DC Load centers, they just have
separate areas, but there is no partition, or anything like that. They
are UL listed. I don't do GT, so I don't really deal with this issue
outside of the E panel, but if it were me, I'd just zip tie the PV wires
together, put labeling on them so that it was clear they were PV
conductors, and call it a day.
Ray Walters
Remote Solar
303 505-8760
On 2/1/21 6:55 PM, Dave Angelini Offgrid Solar wrote:
I land 600vdc PV into the Mppt/Mppt's only. I never mix 600vdc with
anything except SPD/disco ever!
Just not that hard and for offgrid, standard practice for reliability.
Same with 150vdc, I never get it into the PDP and disco it up stream
form mppt.
*Dave Angelini Offgrid Solar "we go where powerlines don't"
http://members.sti.net/offgridsolar/
<http://members.sti.net/offgridsolar/> e-mail offgridso...@sti.net
<mailto:offgridso...@sti.net> text 209 813 0060*
On Mon, 1 Feb 2021 15:37:34 -0700, Mac Lewis <maclew...@gmail.com> wrote:
Hello wrenches,
What are folks using for raceway partitions to comply with 690.31(B)
when running AC/DC and batteries conductors through a common gutter?
Is there a product or just something made by the installer? These
multiport inverters make it difficult not to use a gutter and have a
clean installation.
Thanks!
--
Mac Lewis
"Yo solo sé que no sé nada." -Sócrates
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
