The only thing I would add to William's list of things to do to solve this issue is that there is a proper sequence in shutting down and rebooting the inverter, found in Outback  docs.  There is also firmware for the HUB but not sure if that would help or is necessary in this situation.

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net

On 1/8/2021 11:54 AM, William Miller wrote:

Drake:

I would suggest the following course of action:

1.Reboot Mate

2.Reboot inverter

3.Reset all equipment to factory defaults and manually reprogram each item

4.Update Mate Firmware

5.Update Inverter Firmware.

We have solved mystery Radian problems with a firmware update.

Good luck!

William Miller

Miller Solar

17395 Oak Road, Atascadero, CA 93422

805-438-5600

www.millersolar.com <http://www.millersolar.com>

CA Lic. 773985

-----Original Message-----
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org <mailto:re-wrenches-boun...@lists.re-wrenches.org>] On Behalf Of drake.chamber...@redwoodalliance.org <mailto:drake.chamber...@redwoodalliance.org>
Sent: Friday, January 8, 2021 10:34 AM
To: RE-wrenches@lists.re-wrenches.org <mailto:RE-wrenches@lists.re-wrenches.org>
Subject: [RE-wrenches] Radian Charges 1 hour per calendar day

Hello Wrenches,

An off grid, Radian / Mate 3 system we set up some years back has worked

flawlessly. The client is now reporting that his system will only go

into absorption charge for 1 hour per calendar day. The setting was

previously to absorb for 2 hours.

He has tried shutting off the generator and then restarting. The

inverter will connect, but not go into absorb.

During this cloudy period, he is only able to get the batteries to about

80 percent before he needs to leave the site for a week or so.

I finally go through to Outback, and they think it is a Firmware

problem. As it is a long drive out, it seems worth while to run it by

the list. Does FW this seem like the issue?

Thank you,

Drake


--



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to