Drake:
I would suggest the following course of action: 1. Reboot Mate 2. Reboot inverter 3. Reset all equipment to factory defaults and manually reprogram each item 4. Update Mate Firmware 5. Update Inverter Firmware. We have solved mystery Radian problems with a firmware update. Good luck! William Miller Miller Solar 17395 Oak Road, Atascadero, CA 93422 805-438-5600 www.millersolar.com CA Lic. 773985 -----Original Message----- From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of drake.chamber...@redwoodalliance.org Sent: Friday, January 8, 2021 10:34 AM To: RE-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] Radian Charges 1 hour per calendar day Hello Wrenches, An off grid, Radian / Mate 3 system we set up some years back has worked flawlessly. The client is now reporting that his system will only go into absorption charge for 1 hour per calendar day. The setting was previously to absorb for 2 hours. He has tried shutting off the generator and then restarting. The inverter will connect, but not go into absorb. During this cloudy period, he is only able to get the batteries to about 80 percent before he needs to leave the site for a week or so. I finally go through to Outback, and they think it is a Firmware problem. As it is a long drive out, it seems worth while to run it by the list. Does FW this seem like the issue? Thank you, Drake -- _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
