Bill, Sometimes we add some duct tape to the corner guards on the side-stacked module skids, so as you unpack you peel tape back one module at a time. Helps them stay together as a unit and not tip.
Careful with those Mission modules! We had a couple skids of those and the corner miters of the frames were off just a little, so the corners of the modules were like razor blades! They look great though. Ryan > On Aug 20, 2019, at 8:31 PM, William Miller <will...@millersolar.com> wrote: > > Bill: > > I hope your trailer has side walls. Load the pallet near one side of your > trailer. Encourage modules to lean that direction as you cut the bands. If > you are worried about travelling with the load off-center, take some extra > pallets to stack between the modules and the downhill side of your trailer. > The panels tend to stand up when the bands are cut. > > William > > Miller Solar > 17395 Oak Road, Atascadero, CA 93422 > 805-438-5600 > www.millersolar.com > CA Lic. 773985 > > > -----Original Message----- > From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On > Behalf Of Bill Battagin > Sent: Tuesday, August 20, 2019 6:27 PM > To: re-wrenches@lists.re-wrenches.org > Subject: [RE-wrenches] Mission PVs > > Its after hours and I need to load for tomorrow... > > Embarrassing question.... I finally ran out of SolarWorld PVs and just > received a few pallets of Mission MSE310SQ8T PVs. They are stacked on > their edges. hmmm. I took off the top cardboard, there are still 2 > bands running around the 26 PVs horizontally and the cardboard around > the sides. I think only those who have used Mission will know my > conundrum....What's the next step? > > Thanks, > > Bill > > Feather River Solar Electric > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
