Welded foot plates with epoxy’d rock anchor bolts. Installed several in a high wind location of a canyon with basic overkill design ideas worked out with structural engineer years back and still stout.
We had a center pole with 3 outrigger legs. All 4 points rock drilled and epoxy anchored. __________________________________________________________ Dana Orzel Great Solar Works, Inc - NABCEP # 051112-136 d...@solarwork.com - www.solarwork.com O - 970.626.5253 F - 970.626.4140 c - 208.721.7003 "Responsible Technologies for Responsible People since 1988" From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of AE Solar Sent: Wednesday, May 06, 2015 8:57 PM To: RE-wrenches Subject: [RE-wrenches] 3" Pipe Fittings/Pinning Does anyone have a products/methods they recommend for pinning 3” galve pipe to rock for a ground mount? I have a situation where I am pretty sure pinning will be our best option for some of the posts, but I’m not finding any kee klamp or similar fittings for 3” pipe. Thanks for any thoughts/tips... Adam Katzman Autonomous Energies 4872 State Route 9G Germantown NY, 12526 www.autonomousenergies.com (518) 567-1468
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
