If you know somebody with a well drilling rig and a sense of humor pound a few 6 inch holes in the correct places set the pipe in Cross drilled with rebar in it and set the posts in concrete
A big core drill might work also The 6 inch holes give you room to move things around to line them up correctly I have one up here that I may have to do that on luckily I know a guy with a well drilling rig that I have done some favors for in the past Bob Ellison > On May 6, 2015, at 10:56 PM, AE Solar <autonomousenerg...@gmail.com> wrote: > > Does anyone have a products/methods they recommend for pinning 3” galve pipe > to rock for a ground mount? I have a situation where I am pretty sure pinning > will be our best option for some of the posts, but I’m not finding any kee > klamp or similar fittings for 3” pipe. Thanks for any thoughts/tips... > > > > > > > Adam Katzman > Autonomous Energies > 4872 State Route 9G > Germantown NY, 12526 > www.autonomousenergies.com > (518) 567-1468 > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
