Same stuff we use EPDM you can also get it from roofers Jerry On Apr 1, 2015 12:06 PM, "Allan Sindelar" <al...@sindelarsolar.com> wrote:
> Benn, > Seams have never been an issue, because the material is large enough that > it doesn't require seams. Pond liner comes on a roll about 15' wide, so a > 48" or 66" slice can line 2-3 boxes. We cut a rectangle about 12-14" longer > in each direction than the floor, centering the material with 6-7" up each > side and stapled in place along the top edge. A simple corner fold at each > corner works well. I have found it in stock (typically depending on the > season) at Home Depot. > Allan > > *Allan Sindelar* > al...@sindelarsolar.com > NABCEP Certified PV Installation Professional > NABCEP Certified Technical Sales Professional > New Mexico EE98J Journeyman Electrician > Founder (Retired), Positive Energy, Inc. > *505 780-2738 <505%20780-2738> cell* > > > On 3/30/2015 10:48 AM, Benn Kilburn wrote: > > Allan, > How would you deal with a seam that happens to lay within the containment > area? Do you seal/adhere it somehow? With what? Or do you find that you > can get the liner sheets large enough that you just 'stuff it in' (for lack > of a better term), and then in the corners do you just double it over to > make a tight fit? Or make cuts in the corners...? > Thanks, > Benn Kilburn > SkyFire Energy Inc. > 780-906-7807 > > > On Mar 30, 2015, at 10:26 AM, Allan Sindelar <al...@sindelarsolar.com> > wrote: > > Bill, > We have lined plywood boxes with either EPDM roofing membrane or vinyl > pond liner, depending on local availability, and both have worked well. > Being a flexible sheet, it is folded up the sides and stapled above the > containment zone. > Allan > > *Allan Sindelar* > al...@sindelarsolar.com > NABCEP Certified PV Installation Professional > NABCEP Certified Technical Sales Professional > New Mexico EE98J Journeyman Electrician > Founder (Retired), Positive Energy, Inc. > *505 780-2738 <505%20780-2738> cell* > > > On 3/30/2015 10:03 AM, frenergy wrote: > > Fellow Wrenches, > > I just called Tap Plastics hoping they would solve my problem of > battery acid containment within a plywood battery box. I was surprised by > their response that the acrylic was not impervious to acid and polyethylene > would not work because sealants nor caulking adhere to it properly. They > did not have anything that would work. > > I've used those individual battery boxes from an auto parts store > (~$12/each) but they take up more space than just the batteries. Has > anyone ever used ice dam underpayment, like Grace? Better idea? > > Thanks for any advice, > > Bill > Feather River Solar Electric > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & > settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette:www.re-wrenches.org/etiquette.htm > > Check out or update participant bios:www.members.re-wrenches.org > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
