Hi Bill, 
Think "spray-on".  Build your box then spray on the liner. 
Have you seen "spray in box liners" for pick up trucks?  It's pretty tough 
stuff and  I would think that it would be able to hold acid. There are plenty 
of places, at least around here (Alberta), that do this and I'd also think that 
you could buy/rent what you need to do it yourself, onsite. 

Benn Kilburn
SkyFire Energy Inc. 
780-906-7807


> On Mar 30, 2015, at 10:03 AM, "frenergy" <frene...@psln.com> wrote:
> 
> Fellow Wrenches,
> 
>       I just called Tap Plastics hoping they would solve my problem of 
> battery acid containment within a plywood battery box.  I was surprised by 
> their response that the acrylic was not impervious to acid and polyethylene 
> would not work because sealants nor caulking adhere to it properly.  They did 
> not have anything that would work.
> 
>       I've used those individual battery boxes from an auto parts store 
> (~$12/each) but they take up more space than just the batteries.  Has anyone 
> ever used ice dam underpayment, like Grace? Better idea?
> 
> Thanks for any advice,
> 
> Bill
> Feather River Solar Electric 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to