Free would be good, we did have to pay to have it fixed the first time. Jesse
Sent from my iPad > On Sep 22, 2014, at 9:22 PM, "William Miller" <will...@millersolar.com> wrote: > > Friends: > > I will ratify what Jay says below. Unfortunately, in my experience the > controllers are a bit too fragile and I have needed tech support too often. > I suspect your controller is failing. Wattsun will likely fix it for free, > you just have to provide the removal, shipping and reinstallation. > > William > > > Lic 773985 > millersolar.com > 805-438-5600 > > -----Original Message----- > From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On > Behalf Of jay peltz > Sent: Monday, September 22, 2014 10:07 AM > To: RE-wrenches > Subject: Re: [RE-wrenches] Watsun problem > > Hi Jesse > > I've always found the tech support at Array tech to be really good I'd call > them. > > Jay > > Peltz power > > > > >> On Sep 22, 2014, at 9:30 AM, Solar <dahlso...@gmail.com> wrote: >> >> Hello, >> >> I am having an issue with a Watsun dual axis tracker. It is a 24VDC model, > run of a battery bank that is charged through an outback inverters > connection to the grid. So the battery voltage is always at 24V. The tracker > will run fine for a couple days then it will get stuck in the east facing > direction. I can make it track by switching the control box to "Manual > Control Mode" and then moving the array in any direction for a second or two > and then switching it back to "Automatic Control Mode". It will then track > for a couple days and get stuck in the east direction again. >> >> Everything is greased regularly, and the voltage at the motors is always > where it needs to be. I haven't noticed anything binding the tracker in the > east direction and it seems like to sensor is fine because it tracks after I > use the steps I described above to move it. >> >> Any thoughts? >> >> Thanks as always, >> >> Jesse > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
