Any sign of electronics failure in the controller box? Recent lightning activity in close proximity? How about a dead spot in the limit switch, or limit switch inoperable?
-----Original Message----- From: "Solar" <dahlso...@gmail.com> Sent: 9/22/2014 12:30 To: "Wrenches" <RE-wrenches@lists.re-wrenches.org> Subject: [RE-wrenches] Watsun problem Hello, I am having an issue with a Watsun dual axis tracker. It is a 24VDC model, run of a battery bank that is charged through an outback inverters connection to the grid. So the battery voltage is always at 24V. The tracker will run fine for a couple days then it will get stuck in the east facing direction. I can make it track by switching the control box to "Manual Control Mode" and then moving the array in any direction for a second or two and then switching it back to "Automatic Control Mode". It will then track for a couple days and get stuck in the east direction again. Everything is greased regularly, and the voltage at the motors is always where it needs to be. I haven't noticed anything binding the tracker in the east direction and it seems like to sensor is fine because it tracks after I use the steps I described above to move it. Any thoughts? Thanks as always, Jesse Sent from my iPhone _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
