Hi Jesse I've always found the tech support at Array tech to be really good I'd call them.
Jay Peltz power > On Sep 22, 2014, at 9:30 AM, Solar <dahlso...@gmail.com> wrote: > > Hello, > > I am having an issue with a Watsun dual axis tracker. It is a 24VDC model, > run of a battery bank that is charged through an outback inverters connection > to the grid. So the battery voltage is always at 24V. The tracker will run > fine for a couple days then it will get stuck in the east facing direction. I > can make it track by switching the control box to "Manual Control Mode" and > then moving the array in any direction for a second or two and then switching > it back to "Automatic Control Mode". It will then track for a couple days and > get stuck in the east direction again. > > Everything is greased regularly, and the voltage at the motors is always > where it needs to be. I haven't noticed anything binding the tracker in the > east direction and it seems like to sensor is fine because it tracks after I > use the steps I described above to move it. > > Any thoughts? > > Thanks as always, > > Jesse > > Sent from my iPhone > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
