If NEMA 3R works, you can also consider a Soladeck combiner on pitched roofs. They make one for combining up to three microinverter circuits on the roof, and include circuit protection via DIN rail mounted breakers.
Jason Szumlanski Fafco Solar On Wed, Apr 23, 2014 at 11:11 AM, Drake < drake.chamber...@redwoodalliance.org> wrote: > That would be a nice piece of hardware. Is there any reason you can't use > a NEMA 3R panel? They are used on roofs quite a bit, and are readily > available. The Square D, 8 space, outdoor box should work in most rooftop > environments for the purpose you describe. > > At 06:18 PM 4/21/2014, you wrote: > > Hello Friends! > Anyone have a lead for* NEMA 4x* stainless load centers (electrical > panel)? Â Looking for 4 circuit version rated at about 60-100A @ 240VAC. > > Would like to use it for rooftop combiner for 3 Enphase inverter output > circuits. > Thank you!! > > Sunny Regards, > Kirpal Khalsa > NABCEP Certified PV Installation Professional > Renewable Energy Systems > www.oregonsolarworks.com > 541-218-0201 > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
