Drake.....we want it to mount flush to the slope of a sloped roof....The NEMA 3R are supposed to be mounted vertically....This is for a large residential Enphase system and we wanted to combine the circuits on the roof and bring one set of conductors down..... I did find one custom made by Eaton(Cutler Hammer), but....$952 my cost is too much..I have had them make me one out of fiberglass in the past but it is about 3 years into its roof mount life and showing signs of UV degradation...looking for other options....I think i will dig a little deeper at Midnite Solar.....They may have something....Theirs and Outback's PV combiners are rated to be mounted at a slope....i think it is down to 14 degrees pitch (3/12) Thanks.
Sunny Regards, Kirpal Khalsa NABCEP Certified PV Installation Professional Renewable Energy Systems www.oregonsolarworks.com 541-218-0201 m 541-299-0402 o On Wed, Apr 23, 2014 at 8:11 AM, Drake <drake.chamber...@redwoodalliance.org > wrote: > That would be a nice piece of hardware. Is there any reason you can't use > a NEMA 3R panel? They are used on roofs quite a bit, and are readily > available. The Square D, 8 space, outdoor box should work in most rooftop > environments for the purpose you describe. > > At 06:18 PM 4/21/2014, you wrote: > > Hello Friends! > Anyone have a lead for* NEMA 4x* stainless load centers (electrical > panel)? Â Looking for 4 circuit version rated at about 60-100A @ 240VAC. > > Would like to use it for rooftop combiner for 3 Enphase inverter output > circuits. > Thank you!! > > Sunny Regards, > Kirpal Khalsa > NABCEP Certified PV Installation Professional > Renewable Energy Systems > www.oregonsolarworks.com > 541-218-0201 > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
