That would be a nice piece of hardware. Is there
any reason you can't use a NEMA 3R panel? They
are used on roofs quite a bit, and are readily
available. The Square D, 8 space, outdoor box
should work in most rooftop environments for the purpose you describe.
At 06:18 PM 4/21/2014, you wrote:
Hello Friends!
Anyone have a lead for NEMA 4x stainless load
centers (electrical panel)? Â Looking for 4
circuit version rated at about 60-100A @ 240VAC.
Would like to use it for rooftop combiner for 3
Enphase inverter output circuits.
Thank you!!
Sunny Regards,
Kirpal Khalsa
NABCEP Certified PV Installation Professional
Renewable Energy Systems
<http://www.oregonsolarworks.com>www.oregonsolarworks.com
541-218-0201
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
