If you want to utilize a mate at the equipment and one 300' away why not just have a mate in both locations and always keep the remote one plugged in, unless you are in front of the equipment, then just plug that one in. When you turn off the lights to leave just make sure you plug the remote mate back in. It would require some interface and maybe a instruction label or two, but is doable, no? Or would it not work because of memory, settings or other limiting factors?
benn DayStar Renewable Energy Inc. www.daystarsolar.ca 780-906-7807 Construction Electrician Solar PV Systems Certified Certificate # 0007S HAVE A SUNNY DAY From: frenergy <frene...@psln.com> Reply-To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Date: Sunday, April 7, 2013 10:10 PM To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Subject: [RE-wrenches] Two Mates > Bob-O, et al. > > Thanks for the help...I guess I always thoughts 2 Mates were do-able, > now I see it's even labeled on the second port of a hub "2nd Mate". But alas, > from your feed back, I'll not be utilizing another Mate in this (or any) > system. Dang. > > Bill > Feather River Solar Electric > > >> >> ----- Original Message ----- >> >> From: Dana <mailto:d...@solarwork.com> >> >> To: 'RE-wrenches' <mailto:re-wrenches@lists.re-wrenches.org> >> >> Sent: Saturday, April 06, 2013 3:34 PM >> >> Subject: Re: [RE-wrenches] Two Mates >> >> >> >> >> >> Ditto the second port will not work according to a conversation with OB a >> while back. >> >> >> >> >> >> ____________________________________________________________________________ >> >> Dana Orzel >> >> Great Solar Works, Inc - NABCEP # 051112-136 >> >> d...@solarwork.com - www.solarwork.com <http://www.solarwork.com> >> >> O - 970.626.5253 F - 970.626.4140 C - 970.209.4076 >> >> "Responsible Technologies for Responsible People since 1988" >> >> >> >> >> >> >> >> >> From: re-wrenches-boun...@lists.re-wrenches.org >> [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Bob-O >> Schultze >> Sent: Saturday, April 06, 2013 4:32 PM >> To: RE-wrenches >> Subject: Re: [RE-wrenches] Two Mates >> >> >> >> I don't know about the Mate3, but I could never get two Mates to work on a >> Hub-4 or Hub-10. Yes, there are two spaces for Mates on a Hub 10, but >> according to one of the techies I spoke to, it was a good idea that never >> happened. >> >> >> >> Bob-O >> >> >> >> >> >> >> >> >> On Apr 6, 2013, at 12:01 PM, frenergy wrote: >> >> >> >> >> >> >> >> Wrenches, >> >> >> >> >> >> >> >> I need a little Weekend Wrench assistance. I can't find anything >> definitive in the Mate3 OM discussing how many Mates can be connected to a >> Radian. I have a backhoe showing up Monday AM. I am running power and cat5 >> for a Mate3 from a Radian to a location 300' away. >> >> >> >> >> >> >> >> Two things: This is the max recommended for the hub-to-a-mate distance so >> I'm planning on pulling it in its own conduit, separate from the power (do >> other tricks come to mind to insure the signal makes it?), and >> >> >> >> Can I connect this Mate3 and keep the one at the Radian online? Has anybody >> actually done this? >> >> >> >> >> >> >> >> Thanks, as always, >> >> >> >> >> >> >> >> Bill >> >> >> >> <FRS_working_logo.jpg> >> >> >> > _______________________________________________ List sponsored by Home Power > magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address > & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules > & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: > www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
