William, I would be interested in seeing a photo of the new technique if you could share it as well
Kind regards Tom Duffy Systems Design Engineer t...@thesolar.biz USA Toll Free 888-503-6772 Bocas del Toro, Panama 6126-1253 Although no trees were killed in the sending of this message, a large number of electrons were terribly inconvenienced. Confidentiality Notice: This message including any attachments is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender and delete any copies of this message. -----Original Message----- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Carl Adams Sent: Friday, March 02, 2012 1:13 PM To: RE-wrenches Subject: Re: [RE-wrenches] MC4 Box connectors Dana, Jay, William, Thanks for your responses. AEE did not carry the box/bulhead MC4 only the standard cable connector. PV-Cable suggested by Jay had the connectors at $2.97 each, and can provide these in small quantities William, I would be interested in seeing a photo of the new technique if you could share it. With Regards Carl Adams SunRock Solar On Fri, Mar 2, 2012 at 10:41 AM, jay peltz <j...@asis.com> wrote: > Hi William, > > Was this cheaper than getting bulkhead fittings? > Very cool work around. > > Jay > > peltz power > On Mar 2, 2012, at 7:19 AM, William Miller wrote: > >> Carl: >> >> That is the only type of connector we use. They are very solid and >> save one extra splice for each positive or negative lead. See: >> http://millersolar.com/MillerSolar/practices/Technical_Procedures/PV_ >> wiring/_PV_wiring.html >> >> Just yesterday, working with a machinist, we figured out a simple procedure >> for modifying a 1/2" threaded plug to accept the threaded stud on the back >> of these connectors. Now we can thread these into 1/2" hubs on bell boxes. >> Very handy. >> >> We have only ordered them in quantities of 100. >> >> Good luck, >> >> William >> >> > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
