Hi William, Was this cheaper than getting bulkhead fittings? Very cool work around.
Jay peltz power On Mar 2, 2012, at 7:19 AM, William Miller wrote: > Carl: > > That is the only type of connector we use. They are very solid and save one > extra splice for each positive or negative lead. See: > http://millersolar.com/MillerSolar/practices/Technical_Procedures/PV_wiring/_PV_wiring.html > > Just yesterday, working with a machinist, we figured out a simple procedure > for modifying a 1/2" threaded plug to accept the threaded stud on the back of > these connectors. Now we can thread these into 1/2" hubs on bell boxes. > Very handy. > > We have only ordered them in quantities of 100. > > Good luck, > > William > > _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
