Carl:
That is the only type of connector we use. They are very solid and save
one extra splice for each positive or negative
lead. See:
http://millersolar.com/MillerSolar/practices/Technical_Procedures/PV_wiring/_PV_wiring.html
Just yesterday, working with a machinist, we figured out a simple procedure
for modifying a 1/2" threaded plug to accept the threaded stud on the back
of these connectors. Now we can thread these into 1/2" hubs on bell
boxes. Very handy.
We have only ordered them in quantities of 100.
Good luck,
William
At 12:14 PM 3/1/2012, you wrote:
Hello Fellow Wrenches
Is anyone using MC4 box connectors and if so do you have a source for
these in small quantities. I need 20 each male and female for an
upcoming project. MC Part number 32.0057P0001 for the Male and
32.0056P0001 for the Female.
With Regards
Carl Adams
SunRock Solar
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.455 / Virus Database: 271.1.1/4243 - Release Date: 02/29/12
20:36:00
Miller Solar
Voice :805-438-5600
email: will...@millersolar.com
http://millersolar.com
License No. C-10-773985
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
