I have been prolonging the temp comp. absorption voltage (no current) on start batteries in boats for many years without any problems.
Larry Liesner Wirewiz 31 Lincoln St Westport, CT 06880 Phone: 203-644-2404 wire...@gmail.com www.wire-wiz.com On Apr 28, 2011, at 5:52 PM, Starlight Solar, Larry Crutcher wrote: > ...."Until now"?..... > For proper VRLA battery charging, once it is full, you MUST reduce the > voltage. It does not matter that you are opportunity charging. What if your > turbine is making power 24/7? The voltage will still need to be reduced after > a few hours or have a fixed voltage setting. I don't think you are ungrateful > but again I encourage you to re-read this thread and the manufacturers > instructions. It's all there. > > Larry > ----- Original Message ----- > From: Hugh > To: RE-wrenches > Sent: Thursday, April 28, 2011 2:04 PM > Subject: Re: [RE-wrenches] AGM battery charging, more details > > I am sorry if i seem ungrateful for the many useful ideas that have been > voiced. I suppose I just like to try to oversimplify things. At present my > over-simplification is to say that, for opportunity charging, the only thing > that really matters is not to exceed the temperature-compensated absorption > voltage. Until now I had imagined that it was dangerous to prolong the > absorption voltage stage. But maybe float is not so important as making sure > that the battery gets enough charge to prevent premature failure. By the > time the charging current has dropped to the transition current level it is > too low to do any damage and can be prolonged indefinitely (until wind and > sun stop anyway). This would not work in a grid connected situation, but > seems to fit for mine. I am sure you guys will point out if I have got this > wrong. > -- > Hugh Piggott > > Scoraig > http://www.scoraigwind.co.uk > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
