Is there a system size at which these OSHA requirements don't apply? Or does an installer try to fly under the radar on residential systems? It seems to me this would be a sizable cost factor that would favor small distributed systems over large commercial projects. A friend contracting the paint on a large apartment complex was asked by the inspector if he had given his workers a sheet warning them not to eat the caulk..yummy, burp.
Bill Dorsett Sunwrights Manhattan, KS From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Glenn Burt Sent: Monday, May 02, 2011 5:21 PM To: 'RE-wrenches' Subject: Re: [RE-wrenches] Perimeter warning lines Be sure to investigate this fully. OSHA began requiring us to install warning lines 15' from the building edges recently. up from the 6' of days of yore. Quite a shock to price fall protection carts and fall restraint systems as well! Carts to protect persons installing fall restraint systems so work can begin. Carts for those working within 15' of a building edge. -Glenn Burt From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of North Texas Renewable Energy Inc Sent: Monday, May 02, 2011 12:57 PM To: RE-wrenches Subject: [RE-wrenches] Perimeter warning lines OSHA compliant Wrenches we're about to begin aPV installation along the lower edge of a 100 foot long metal building. Because of skylights down the middle of the length of the E-W roof we are forced to mount the southern-most row only about 5 feet from the 20 foot high eave. Fortunately the slope is less than 10 degrees but perimeter warning lines are a must here. Not wanting to appear a cheapskate here but I'm not surprised at the outrageous cost of "OSHA compliant" perimeter warning flag systems. Your basic fold up standards with nothing more than light-weight bases and multi-colored banner rope runs hundreds of dollars. Even sandbags for ballast are way overpriced. So where are the affordable units available or is there such a thing? Better yet, has someone fabricated their own pro-looking standards and used the same off-the-shelf banner rope used in the roofing catalogs? I already have several hundred feet of banner rope just nothing to hang it from. thanks as always Jim Duncan North Texas Renewable Energy NABCEP Certified Solar PV Installer No.031310-57 TECL 27398 nt...@1scom.net 817.917.0527 www.ntrei.com
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
