Jay,
I've seen that happen. I concluded that it was associated with an AGS
fault status. I also reset the Mate to factory defaults and reprogrammed
all the AGS settings for the customer. No problem since then.
Kent Osterberg
Blue Mountain Solar, Inc.
jay peltz wrote:
HI All,
I'm curious if anyone can shed light on this one.
I've got a customer whos telling me their mate changes from USE to drop on its
own.
they say they set it on USE, come back and check it and its on Drop?
I"ve never seen this one.
any thoughts other than user error?
system is 6 years old, probably original mate, no AGS, sealed fx
thanks,
jay
peltz power
PS the site is a 8hr drive each way, not my install, just trying to help out.
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
