Todd & Peter,
The _benefits_ of tankless water heating include:
endless hot water
no standby loss
smaller unit, wall hung (no floorspace requirement)
repairable unit - you don't have to trash it every seven years (reported
national average)
The _disadvantages_ of tankless water heating include:
flow limited heater (proper sizing is critical if hot water needs are to be
met during wintertime (high delta T) conditions)
reduced hot water pressure (resulting from the additional piping of the heat
exchanger)
"cold water sandwich" on units missing a pilot light
no trickle of hot water
routine maintenance in hard water quality areas (no different than a tank
except you don't have to replace, you can maintain)
IMHO there needs to be a very, very good reason to keep the existing tank
when adding a larger than conventional solar tank. You are definitely not
saving space or minimizing standby losses with dual tanks.
If you are asking why use the tankless _instead of_ the solar tank, you may
want to refer to Tom Lane's ever expanding "Solar Hot Water
Systems..."Lessons Learned ..." (now available with an Instructor edition
and in color)
for a further discussion of system configurations.
Bill Loesch
Solar 1 - Saint Louis Solar
----- Original Message -----
From: "Peter Parrish" <peter.parr...@calsolareng.com>
To: "'RE-wrenches'" <re-wrenches@lists.re-wrenches.org>
Sent: Thursday, September 16, 2010 10:28 AM
Subject: Re: [RE-wrenches] On Demand Heaters for SDHW
You’re right, Todd, there is often a space limitation. But overall, the
tankless approach is more economical, eliminating the need to keep 80 odd
gallons of water perpetually up to temperature. Remember the solar heated
water is "make up water" and can contribute to the temperature of the
traditional water heater only while hot water is being used. So, my guess
is that 1/2 of the day in a residence the traditional tank is keeping
water up to temperature for no apparent use.
- Peter
Peter T. Parrish, Ph.D., President
California Solar Engineering, Inc.
820 Cynthia Ave., Los Angeles, CA 90065
CA Lic. 854779, NABCEP Cert. 031806-26
peter.parr...@calsolareng.com
Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
________________________________________
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Todd Cory
Sent: Thursday, September 16, 2010 8:17 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] On Demand Heaters for SDHW
I know this was not the question, but this whole thread is predicated on
the use of a demand hot water heater. Unless there is a space limitation,
why would this be done over a traditional tank unit?
Todd
Bill Loesch wrote:
Kris,
Boiler manufacturers today get starry-eyed when their machines are able to
provide a 10:1 turndown ratio. Even the venerable natural draft Bosch
125BS * provided a better than 4:1 turndown ratio and all the condensing
powervent units compared below regularly offer 10:1 and some better than
20:1. With each benefit comes a disadvantage, like with current production
cars, serious repair/maintenance takes place primarily at the dealer since
they are usually the only ones to pony up for the multitude of specialized
test equipment. I find it a bit of backward progress to have to tell
someone that the reason they don't have reliable hot water is because they
don't have the current software update (due in no small part to the
marketing gurus who have no qualms about using the customer as the proving
grounds for their product). Many plumbers have no clue to the workings of
a combustion analyzer, a necessary tool for negative pressure gas valve
tuning and replacement (and a multitude of other tasks where the blue
flame is no longer sufficient to be able to deliver optimum performance).
Your Takagi needs AC power to (in order of decreasing current requirements
for a generic power vented tankless)
power the freeze protection heating elements
run the primary combustion fan
run the secondary combustion fan
provide control to
gas valve
water valve
control board (oftentimes with digital display) which provides the
logic and timing circuits for the multitude of sensors and limit switches
and remote controls and wireless remote controls etc., etc.
Long live the thermocouple.
My compliments on your simplistic approach to coordinate the solar storage
tank and tankless. Simplicity is the ultimate sophistication.
Bill Loesch
Solar 1 - Saint Louis Solar
PS I reiterate, despite other RE-Wrenches list comments to the contrary
about
"modulate to
zero", NONE of ANY of the Big Five tankless manufacturers that market to
North America have a low fire rate which modulates to zero or anything
near
it for the very same reason that you will never get a trickle of hot water
out of any tankless water heater. (~0.5 gpm minimum activation flow
requirement)
Comparing condensing heaters with ~200,000 max BTU/h input
Bosch GWH C 800 ES 19,900 BTU/h
Noritz NRC 111 11,000
Paloma no condensing heaters
Rinnai RC98HPe 9,500
Takagi T-H2 13,000
Thanks for your patience, I hope it was not too technical.
----- Original Message ----- From: "Peter Parrish"
<peter.parr...@calsolareng.com>
To: "'RE-wrenches'" <re-wrenches@lists.re-wrenches.org>
Sent: Tuesday, September 14, 2010 10:37 AM
Subject: [RE-wrenches] On Demand Heaters for SDHW
We have a SDHW client that wants to replace his old water heater with
a new tankless water heater. We do a SDHW system about once a year,
and only for clients that are getting a PV system from us to begin
with. So this is not a
big business line for us and we are behind the curve in terms of
understanding the latest technologies.
As I remember from an excellent workshop that I took about four years
ago: when used in conjunction with a SDWH system, the tankless heater
should
(1) Modulate heat input based on INPUT water temperature
(2) Be able to modulate down to ZERO BTU/hr
The only unit I knew of back then was the Bosch 125BS (I believe).
Today I can't find any bigger units that fit the above requirements.
Short of using two Bosch 125BS units in parallel, does anyone have a
solution?
- Peter
Peter T. Parrish, Ph.D., President
California Solar Engineering, Inc.
820 Cynthia Ave., Los Angeles, CA 90065
CA Lic. 854779, NABCEP Cert. 031806-26 peter.parr...@calsolareng.com
Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
--
Todd Cory
KE6SXS
toddc...@finestplanet.com
Mt. Shasta Energy Services
License C-10 #811428
P.O. Box 689
Mt. Shasta, CA. 96067
(530) 926-1079
“I'd put my money on solar energy...I hope we don't have to wait till oil
and coal run out before we tackle that."
∞ Thomas Edison, in conversation with Henry Ford and Harvey Firestone,
March 1931
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
