HI The power factor is set by the inverter. The modules are unity as there are DC. but the inverter is very close to unity. The couple of times I tried to measure power factor I got Unity. But I would think the load may affect the inverter power factor. Darryl
--- On Wed, 7/29/09, Ron Young <solarea...@solareagle.com> wrote: > From: Ron Young <solarea...@solareagle.com> > Subject: [RE-wrenches] Power Factor > To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org> > Date: Wednesday, July 29, 2009, 7:45 PM > Can anyone point me in the > direction to find the power factor for Sanyo HIT N 205 > panels? The utility is requesting it on a net metering > interconnection application. > Ron YoungearthRight Products - > Solareagle.com > > -----Inline Attachment Follows----- > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
