Thanks Dana and Brian,

I will look for a board next time I'm out. I might try calling Bill Barnickol if necessary.


-Drake

At 04:56 PM 7/14/2009, you wrote:
Content-Type: multipart/alternative;
        boundary="----=_NextPart_000_0044_01CA0493.564693D0"
Content-Language: en-us

Does it have  a charge controller card mounted in the door?

Dana Orzel

Great Solar Works, Inc
www.solarwork.com
E - d...@solarwork.com
V - 970.626.5253
F - 970.626.4140
C - 970.209.4076
“I'd put my money on solar energy… I hope we don't have to wait 'til oil and coal run out before we tackle that.” ­Thomas Edison, in conversation with Henry Ford and Harvey Firestone, March 1931

From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Drake Chamberlin
Sent: Tuesday, July 14, 2009 8:05 AM
To: RE-wrenches
Subject: [RE-wrenches] Pulse Power CC



Is there any way to adjust the voltage on the charge control of a Pulse Power Center?


Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
NABCEP TM  Certified PV Installer
Office - 740-448-7328
Mobile - 740-856-9648
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
NABCEP TM  Certified PV Installer
Office - 740-448-7328
Mobile - 740-856-9648  
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to