Hi Peter I use a Deflecting Beam Torque Wrench from Warren & Brown. You can order online direct.
http://www.warrenandbrown.com.au/PrecisionTools/ProductTree.aspx?From=Cat&ProductId=61 Cheers Logan > We have a great torque wrench for snugging down module clamps, Sharp SRS > bolts, etc. What do folks use to insure that wire terminals are torqued to > spec? We're talking 1.1 to 3.3 N-m (10-30 in-lbs). I'm imagining something > compact like an over-sized screwdriver. > > > > - Peter > > Peter T. Parrish, President > California Solar Engineering, Inc. > 820 Cynthia Ave., Los Angeles, CA 90065 > Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885 > CA Lic. 854779, NABCEP Cert. 031806-26 > peter.parr...@calsolareng.com > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
