Fastenall is a good source I have purchased from. Also Home Depot sells them.
On Thu, Feb 5, 2009 at 3:51 PM, Peter Parrish <peter.parr...@calsolareng.com > wrote: > Does anyone have a source for stainless steel, self tapping Tek screws? I > could use some #10/3-4 and #10/1-1/2. If they have the little cap and > neoprene washer that would be even better! > > - Peter > > Peter T. Parrish, President > California Solar Engineering, Inc. > 820 Cynthia Ave., Los Angeles, CA 90065 > Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885 > CA Lic. 854779, NABCEP Cert. 031806-26 > peter.parr...@calsolareng.com > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > -- Jason Lombard Open Hand Solar LLC. Certified Sustainable Building Adviser www.openhandsolar.com 505 795 8646 "I'd put my money on solar energy… I hope we don't have to wait 'til oil and coal run out before we tackle that." —Thomas Edison
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
